beko 670427MB Refrigerator User Manual

: June 13, 2024
: Beko

Table of Contents

670427MB Refrigerator
Safety Instructions
Environmental instructions
Your Refrigerator
Installation
Preparation
Using the product
Maintenance and cleaning
Troubleshooting
Documents / Resources

Refrigerator
User Manual

670427MB Refrigerator

670427MB
58 8057 000/AA

Dear Customer,
Please read this manual before using the product.
Thank you for choosing this product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with state of the art technology. To do this, carefully read this manual and any other documentation provided before using the product and keep it as a reference.
Heed all information and warnings in the user manual. This way, you will protect yourself and your product against the dangers that may occur.
Keep the user manual. Include this guide with the unit if you hand it over to someone else.
The following symbols are used in the user guide:
** Hazard that may result in death or injury.
NOTICE A hazard that may cause material damage to the product or its surroundings
** Important information or useful tips on operation.
Read the user manual.
Risk of fire / Flammable materials
INFORMATION

beko 670427MB Refrigerator - FIGURE 1 https://eprel.ec.europa.eu/

The model information as stored in the product data base can be reached by entering following website and searching for your model identiﬁer (*) found on energy label.

Safety Instructions

This section includes the safety instructions necessary to prevent the risk of personal injury or material damage.
Our company shall not be held responsible for damages that may occur if these instructions are not observed.

Installation and repair operations shall always be performed by Authorized Service.
Always use genuine spare parts and accessories.
Original spare parts will be provided for 10 years, following the product purchasing date.
Do not repair or replace any part of the product unless specified expressly in the user manual.
** Do not perform any modifications on the product.
1.1 Purpose of usage
This product is not intended for commercial use and it shall not be used out of its intended purpose.
This product is intended for operating interiors, such as households or similar.
For example;**

In the staff kitchens of the stores, offices and other working environments,
In farm houses,
In the units of hotels, motels or other resting facilities that are used by the customers,
In hostels, or similar environments,
In catering services and similar non-retail applications.

This product shall not be used in open or enclosed external environments such as vessels, balconies or terraces. Exposing the product to rain, snow, sunlight and wind may cause risk of fire.
**1.2 Safety of children, vulnerable persons and pets**

This product may be used by children aged 8 years and older and persons with underdeveloped physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a the product safe way and the hazards involved.
Children between 3 and 8 years are allowed to put and take out food to/ from the cooler product.
Electrical products are dangerous for children and pets. Children and pets must not play with, climb on, or enter the product.
Cleaning and user maintenance should not be performed by children unless there is someone overseeing them.
Keep the packaging materials away from children. Risk of injury and suffocation.
Before disposing of old products that shall not be used any more:
1. Unplug the power cord from the mains socket.
2. Cut the power cord and remove it from the appliance together with the plug.
3. Do not remove the racks and drawers from the product to prevent children from etting inside the appliance.
4. Remove the doors.
5. Store the product so that it shall not be tipped over.
6. Do not allow children to play with the scrapped product.
Do not dispose of the product by throwing it into fire. Risk of explosion.
If there is a lock available in the product’s door, keep the key out of children’s reach.

1.3 Electrical safety

The product shall not be plugged into the outlet during installation, maintenance, cleaning, repair, and transportation operations.
If the power the cord is damaged, it shall be replaced by authorized service only to avoid any risk that may occur.
Do not tuck the power cord under the product or to the rear of the product. Do not put heavy items on the power cord. The power cord should not be bent, crushed, and come into contact with any heat source.
Do not use an extension cord, multiplug or adaptor to operate your product.
Portable multi sockets or portable power supplies may overheat and cause fire. Thus, do not have a multi-plug behind or in the vicinity of the product.
The plug shall be easily accessible. If this is not possible, a mechanism that meets the electrical legislation and that disconnects all terminals from the mains (fuse, switch, main switch, etc.) shall be available on the electrical installation.
Do not touch the plug with wet hands.
When unplugging the appliance, don’t hold the power cord, but the plug.
When positioning the appliance, ensure the supply cord is not trapped or damaged
Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

1.4 Handling Safety

This product is heavy, do not handle it by yourself.
Do not hold the product from its door while handling the product.
Be careful not to damage the cooling system and the pipes while handling the product. Do not operate the product if the pipes are damaged, and contact an authorized service.

1.5 Installation Safety

Contact the Authorized Service for the product’s installation. To prepare the product for installation, see the information in the user guide and make sure the electric and water utilities are as required. If the installation is not suitable, call a qualified electrician and plumber to have them make the necessary arrangements. Otherwise, electric shock, fire, issues with the product or injuries may occur.
Check for any damage on the product before installing it. Do not have the product installed if it is damaged.
Place the product on a level and hard surface and balance with the adjustable legs. Otherwise, the refrigerator may tip over and cause injuries.
The product shall be installed in a dry and ventilated environment. Do not keep carpets, rugs or similar floor covers under the product. This may cause risk of fire as a result of inadequate ventilation!
Do not block or cover ventilation holes. Otherwise, power consumption may be increased and damage to your product may occur.
Do not connect the product to supply systems such as solar power supplies. Otherwise, damage to your product may occur as a result of the abrupt voltage fluctuations!
The more refrigerant a refrigerator contains, the bigger its installation room shall be. In very small rooms, a flammable gas-air mixture may occur in case of a gas leak in the cooling system. At least 1 m3 of volume is required for each 8 grams of refrigerant.
The amount of the refrigerant available in your product is specified in the Type Label. The installation place of the product shall not be exposed to direct sunlight and it shall not be in the vicinity of a heat source such as stoves, radiators, etc.
If you cannot prevent installation of the product in the vicinity of a heat source, you shall use a suitable insulation plate and the minimum distance to the heat source shall be as specified below.
– At least 30 cm away from heat sources such as stoves, heating units and heaters, etc.,
– And at least 5 cm away from electric ovens.
Your product has the protection class of I. Plug the product in a grounded socket that conforms with the Voltage, Current and Frequency values specified in the type label. The socket outlet shall be equipped with a fuse with a rating of 10 A – 16 A. Our company shall not be responsible for the damages that shall be incurred as a result of operating the product without ensuring ground and electrical connections made as per local or national regulations.
The product’s power cable must be unplugged during installation. Otherwise, risk of electric shock and injury may occur!
Do not plug the product to loose, broken, dirty, greasy sockets or sockets that has come out their seats or sockets with a risk of water contact.
Place the power cord and hoses (if available) of the product so that they shall not cause a risk of tripping over.
Penetration of humidity to live parts or to the power cord may cause short circuit. Thus, do not use the product in humid environments or in areas where water may splash (e.g. garage, laundry room, etc.) If the refrigerator is wet by water, unplug it and contact an authorized service.
Do not connect your refrigerator to power saving devices. These systems are harmful for the product.

1.6 Operational safety

Do not use chemical solvents on the product. These materials contain an explosion risk.
In case of a failure of the product, unplug it and do not operate until it is repaired by the authorized service. There is a risk of electric shock!
Do not place a source of flame (e.g. candles, cigarettes, etc.) on the product or in the vicinity of it.
Do not get on the product. Risk of falling and injury!
Do not cause damage to the pipes of the cooling system using sharp and piercing tools. The refrigerant that sprays out in case of puncturing the gas pipes, pipe extensions or upper surface coatings may cause irritation of skin and injuries of the eyes.
Do not place and operate electric appliances inside the refrigerators/deep freezer unless it is advised by the manufacturer.
Do not jam any parts of your hands or your body to the moving parts inside the product.
Be careful to prevent jamming of your fingers between the refrigerator and its door.
Be careful while opening or closing the door if there are children around.
Do not put ice cream, ice cubes or frozen food to your mouth as soon as you take them out of the freezer. Risk of frostbite!
Do not touch the inner walls, metal parts of the freezer or food kept inside the refrigerator with wet hands. Risk of frostbite!
Do not place soda cans or cans and bottles that contain fluids that may be frozen to the freezer compartment. Cans or bottles may explode. Risk of injury and material damage!
Do not use or place materials sensitive against temperature such as flammable sprays, flammable objects, dry ice or other chemical agents in the vicinity of the refrigerator. Risk of fire and explosion!
Do not store explosive materials such as aerosol cans with flammable materials inside the product.
Do not place cans containing fluids over the product. Splashing of water on an electrical part may cause the risk of an electric shock or a fire.
This product is not intended for storage and cooling of medicines, blood plasma, laboratory preparations or similar materials and products that are subject to the Medical Products Directive.
If the product is used against its intended purpose, it may cause damage to or deterioration of the products kept inside.
If your refrigerator is equipped with blue light, do not look at this light with optical devices. Do not stare directly at UV LED light for a long time. Ultraviolet rays may cause eye strain.
Do not fill the product with more food than its capacity. Injuries or damages may occur if the contents of the refrigerator falls when the door is opened. Similar problems may occur when an object is placed over the product.
Ensure that you have removed any ice or water that may have fallen to the floor to prevent injuries. Change the locations of the racks/ bottle racks on the door of your refrigerator while the racks are empty only. Danger of physical injury!
Do not place objects that may fall/ tipped over on the product. These objects may fall while opening or closing the door and cause injuries and/or material damages.
Do not hit or exert excessive pressure on glass surfaces. Broken glass may cause injuries and/or material damages. The cooling system in your product contains R600a refrigerant. The refrigerant type used in the product is specified in the the type label. This gas is flammable. Therefore, be careful not to damage the cooling system and the pipes while operating the product. In case of damage to the pipes;
– do not touch the product or the power cord,
– Keep the product away from potential sources of fire that may cause the product to catch fire.
– ventilation the area where the product is placed. Do not use a fan.
– Contact authorized service.
If the product is damaged and you observe gas leak, please stay away from the gas. Gas may cause frostbite if it contacts your skin.

1.7 Maintenance and cleaning safety

Do not pull by the door handle if you shall move the product for cleaning purposes. Handle may cause injuries if it is pulled too hard.
Do not clean the product by spraying or pouring water on the product and inside the product. Risk of electric shock and fire.
Do not use sharp or abrasive tools to clean the product. Do not use materials such as household cleaning agents, detergents, gas, gasoline, alcohol, wax, etc.
Use cleaning and maintenance agents that are not harmful for food only inside the product.
Do not use steam or steamed cleaning materials for cleaning the product and thawing the ice inside it. Steam contacts the live areas in your refrigerator and causes short circuit or electric shock!
Take care to keep water away from the electronic circuits or lighting of the product.
Use a clean, dry cloth to wipe the dust or foreign material on the tips of the plugs. Do not use a wet or damp piece of cloth to clean the plug. Otherwise, risk of fire or electric shock may occur.

1.8 HomeWhiz
(May not be applicable for all models)

Follow the safety warnings even if you are away from the product while operating the product via HomeWhiz app. Also, pay attention to the warnings in the app.

1.9 Lighting
(May not be applicable for all models)

Contact an authorized service when you shall replace the LED / bulb using for lighting.

Environmental instructions

2.1 Compliance with the WEEE Directive and Disposing of the Waste Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
** This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to offical collection point for recycling of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was puchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.
2.2 Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
2.3 Package information
** Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Your Refrigerator

beko 670427MB Refrigerator - Refrigerator

1. Cooler compartment door shelf
2. Water dispenser filling tank
3. Egg section
4. Water dispenser reservoir
5. Bottle shelf
6. Sliding storage box
7. Adjustable legs
8. Deep freezer compartment
9. Quick freeze compartment| 10. Ice cube tray & Ice bank
11. Vegetable bin
12. Zero degree compartment
13. Interior light
14. Cooler compartment glass shelf
15. Temperature adjustment button
16. Cooler compartment
17. Freezer compartment
18. Freezer drawer
---|---

*optional: Pictures given in this manual are given as example figures and they may not be exactly the same as your product. If your product does not comprise the relevant parts, the information pertains to other models.

Installation

4.1 Right place for installation
Contact the Authorized Service for the product’s installation. To ready the product for installation, see the information in the user guide and make sure the electric and water utilities are as required. If not, call an electrician and plumber to arrange the utilities as necessary.
WARNING: The manufacturer assumes no responsibility for any damage caused by the work carried out by unauthorized persons.
WARNING: The product’s power cable must be unplugged during installation. Failure to do so may result in death or serious injuries!
WARNING: If the door span is too narrow for the product to pass, remove the door and turn the product sideways; if this does not work, contact the authorized service.

Place the product on a flat surface to avoid vibration.
Place the product at least 30 cm away from the heater, stove and similar sources of heat and at least 5 cm away from electric ovens.
Do not expose the product to direct sunlight or keep in damp environments.
The product requires adequate air circulation to function efficiently.
Your product requires adequate air circulation to function efficiently. If the product will be placed in an alcove, remember to leave at least 5 cm clearance between the product and the ceiling, rear wall and the side walls.
If the product will be placed in an alcove, remember to leave at least 5 cm clearance between the product and the ceiling, rear wall and the side walls. Check if the rear wall clearance protection component is present at its location (if provided with the product). If the component is not available, or if it is lost or fallen, position the product so that at least 5 cm clearance shall be left between the rear surface of the product and the wall of the room. The clearance at the rear is important for efficient operation of the product.
Do not install the product in environments with temperatures below -5°C.

4.2 Attaching the plastic wedges
Use the plastic wedges in the provided with the product to provide sufficient space for air circulation between the product and the wall.

To attach the wedges, remove the screws on the product and use the screws provided with the wedges.
Attach 2 plastic wedges on the ventilation cover as shown in the figure.

4.3 Adjusting the stands
If the product is not in balanced position, adjust the front adjustable stands by rotating right or left.

beko 670427MB Refrigerator - stands

4.4 Power connection
WARNING: Do not use extension or multi sockets in power connection.
WARNING: Damaged power cable must be replaced by Authorized Service.
**** When placing two coolers in adjacent position, leave at least 4 cm distance between the two units.

Our firm will not assume responsibility for any damages due to usage without earthing and power connection in compliance with national regulations.
The power cable plug must be easily accessible after installation.
Do not use multi-group plug with or without extension cable between the wall socket and the refrigerator.

Hot Surface Warning!
Side walls of your product is equipped with refrigerant pipes to improve the cooling system. Refrigerant with high temperatures may flow through these areas, resulting in hot surfaces on the side walls. This is normal and does not need any servicing. Please pay attention while touching these areas.
4.5 Reversing the doors
Proceed in numerical order .

beko 670427MB Refrigerator - numerical order

Preparation

5.1 What to do for energy saving
**** Connecting the product to electronic energy-saving systems is harmful, as it may damage the product.

For a freestanding appliance; ‘this refrigerating appliance is not intended to be used as a builtin appliance’
Do not keep the refrigerator doors open for long periods.
Do not place hot food or beverages into the refrigerator.
Do not overfill the refrigerator; blocking the internal air flow will reduce cooling capacity.
In order to store the maximum amount of food into the cooler compartment of your refrigerator, you should take out the upper drawers and place it onto the glass rack.
The declared energy consumption of your refrigerator was determined by taking out the cooler, ice tray and upper drawers in a way that will enable maximum storage. Using the below drawer when storing is strongly recommended.
Energy saving function should be activated for best energy consumption.
Since hot and humid air will not directly penetrate into your product when the doors are not opened, your product will optimize itself in conditions sufficient to protect your food. In this energy saving function, functions and components such as compressor, fan, heater, defrost, lighting, display and so on will operate according to the needs to consume minimum energy while maintaining the freshness of your foodstuff.
You should not block the airflow by putting in front of the cooler fan. A space of minimum 3cm must be left in front of the protective fan wire when placing food.
Depending on the product’s features; defrosting frozen foods in the cooler compartment will ensure energy saving and preserve food quality.
Food should be stored using the drawers in the cooler compartment in order to ensure energy saving and protect food in better conditions.
Food packages should not be in direct contact with the heat sensor located in the cooler compartment. If they are in contact with the sensor, energy consumption of the appliance might increase.
Make sure the foods are not in contact with the cooler compartment temperature sensor described below.

5.2 First Use
Before using your refrigerator, make sure the necessary preparations are made in line with the instructions in “Safety and environment instructions” and “Installation” sections.

Keep the product running with no food inside for 6 and do not open the door, unless absolutely necessary.

A sound will be heard when the compressor is engaged. It is normal to hear sound even when the compressor is inactive, due to the compressed liquids and gasses in the cooling system.
Front edges of the product might heat up. This is normal. These areas are designed to warm up in order to prevent condensation.
**** In some models indicator panel turns off automatically 5 minutes after the door closes. It will be reactivated when the door is open or any button is pressed.

Using the product

6.1 Temperature adjustment button
Internal temperature of your refrigerator varies depending on the following reasons:

Seasonal temperatures,
Opening the door frequently and leaving it open for long periods,
Meals put into the refrigerator without being cooled to room temperature,
Location of the refrigerator in the room (e.g. exposed to sunshine).
Internal temperature varying due to these factors can be adjusted via the adjustment button.

Numbers around the adjustment button indicate temperature degrees as “°C”.
If the ambient temperature is 20°C, it is recommended to use the refrigerator temperature adjustment at 4°C. In other ambient temperatures this value can be customised.

6.2 Fast Freezing
If you want to freeze large amounts of fresh food, switch the temperature adjustment button to ( ****) position before putting the food into the quick freezing compartment.
It is recommended to keep the button at this position for 24 hours to freeze maximum amount of food indicated as the freezing capacity. Pay special attention not to mix food stolen as frozen and fresh food.
Remember to switch the temperature adjustment button back to its previous position.

6.3 Holiday Function
Vacation mode will be activated after the temperature adjustment knob is set to the hottest position.( ****)
It is not recommended to store food in the refrigerator compartment when the holiday function is active.
Button setting must be changed to cancel the function.

beko 670427MB Refrigerator - Function 2

After setting is completed, you can conceal the temperature setting button by pressing it inside.

beko 670427MB Refrigerator - Function

6.4 Ice bucket
*optional

Take the ice bucket from the freezer compartment.
Fill the ice bucket with water.
Place the ice bucket into the freezer compartment.
The ice will be ready after approximately two hours. Take the ice bucket from the freezer compartment and bend in sightly over the holder that you are going to serve. Ice will easily pour into the serving holder.

beko 670427MB Refrigerator - bucket

6.5 Eggholder
You can put the eggholder on the door or body rack of your choice. If you decide to put it on the body rack, it is recommended to prefer the shelves below as they are colder.
** Do not put the eggholder into the freezer compartment.
6.6 Fan
** Fan was designed to distribute circulate the cold air inside your refrigerator homogeneously.
Operating time of the fan might vary depending the features of your product.
While in some products fan only operates with compressor, in others control system determines the operating time based on the need for cooling.

beko 670427MB Refrigerator - Fan

6.7 The dairy (cold storage) compartment
The dairy (cold storage) compartment” provides lower temperature than the refrigerator compartment. Use this compartment to store delicatessen (salami, sausages, dairy products and etc. ) that requires lower storage temperature or meat, chicken or fish products for immediate consumption. Do not store fruits and vegetables in this compartment.
6.8 Blue light/HarvestFresh
*May not be available in all models
For the blue light,
Fruits and vegetables stored in the crispers that are illuminated with a blue light continue their photosynthesis by means of the wavelength effect of blue light and thus preserve their vitamin content.
ForHarvestFresh,
Fruits and vegetables stored in crispers illuminated with the HarvestFresh technology preserve their vitamins for a longer time thanks to the blue, green, red lights and dark cycles, which simulate a day cycle. If you open the door of the refrigerator during the dark period of the HarvestFresh technology, the refrigerator will automatically detect this and enable the blue-green or red light to illuminate the crisper for your convenience. After you have closed the door of the refrigerator, the dark period will continue, representing the night time in a day cycle.
6.9 Humidity controlled crisper (EverFresh+)
(Optional)
Thanks to the humidity controlled crisper, vegetables and fruits may be stored for a longer period at an environment with ideal humidity conditions. With the humidity setting system with 3 options in front of your crisper, you may control the humidity inside the
compartment as per the food you store. We recommend you to store your food by selecting vegetable option when you store vegetables only, fruit option when you store fruit only and mixed option when you store mixed food. We recommend that the vegetables and fruits shall not be stored in bags to improve the storage period of the food and to better benefit from the humidity control system. Leaving them in plastic bags causes vegetables to rot in a short time. We recommend that cucumbers and broccolis, in particular, are not stored in closed bags. In situations where contact with other vegetables is not preferred, use packaging materials such as paper that has a certain level of porosity in terms of hygiene. When placing the vegetables, place heavy and hard vegetables at the bottom and light and soft ones on the top, taking into account the specific weights of vegetables.
Do not put fruits that have a high ethylene gas production such as pear, apricot, peach and particularly apple in the same crisper with other vegetables and fruits. The ethylene gas coming out of these fruits might cause other vegetables and fruits to mature faster and rot in a shorter period of time.
6.10 HerbBox/HerbFresh
*optional
Remove the film container from HerbBox/ HerbFresh+
Take the film out of the bag and put it into the film container as shown in the image.
Seal the container again and replace it into HerbBox/HerbFresh+ unit.
HerbBox-HerbFresh+ sections are especially ideal for storage of various herbs that are can store your unbagged herbs (parsley, dill, etc.) in this section horizontally and keep them fresh for a much longer period.
The film shall be replaced in every six months.

beko 670427MB Refrigerator - HerbFresh

6.11 Freezing fresh food

To preserve food quality, the food items placed in the freezer compartment must be frozen as quickly as possible, use the rapid freezing for this.
Freezing the food items when fresh will extend the storage time in the freezer compartment.
Pack the food items in air-tight packs and seal tightly.
Make sure the food items are packed before putting in the freezer. Use freezer holders, tinfoil and damp-proof paper, plastic bag or similar packaging materials instead of traditional packaging paper.
**** Ice in the freezing compartment thaws automatically.
Mark each food pack by writing the date on the package before freezing. This will allow you to determine the freshness of each pack every time the freezer is opened. Keep the earlier food items in the front to ensure they are used first.
Frozen food items must be used immediately after defrosting and should not be frozen again.
Do not free large quantities of food at once.

6.12 Recommendations for storing frozen foods
The compartment must be set to at least -18°C.

Place the food items in the freezer as quickly as possible to avoid defrosting.
Before freezing, check the “Expiry Date” on the package to make sure it is not expired.
Make sure the food’s packaging is not damaged.

Freezer Compartment Temperature Setting| Cooler Compartment Temperature Setting| Details
---|---|---
-18°C| 4°C| This is the default, recommended setting.
-20,-22 or -24°C| 4°C| These settings are recommended for ambient temperatures exceeding 30°C.
Quick Freeze| 4°C| Use when you want to freeze your food in a short time. When the process ends, the product will regain its position.
-18°C or colder| 2°C| Use these settings if you believe the cooler compartment is not cold enough due to ambient temperature or frequently opening the door.

6.13 Deep freezer details
As per the IEC 62552 standards, the freezer must have the capacity to freeze 4,5 kg of food items at -18°C or lower temperatures in 24 hours for each 100 litres of freezer compartment volume.
Food items can only be preserved for extended periods at or below temperature of -18°C .
You can keep the foods fresh for months (in deep freezer at or below temperatures of 18°C).
The food items to be frozen must not contact the already-frozen food inside to avoid partial defrosting.
Boil the vegetables and filter the water to extend the frozen storage time. Place the food in air-tight packages after filtering and place in the freezer. Bananas, tomatoes, lettuce, celery, boiled eggs, potatoes and similar food items should not be frozen. In case this food rots, only nutritional values and eating qualities will be negatively affected. A rotting threatening human health is not in question.
6.14 Placing the food

Freezer compartment shelves| Various frozen goods including meat, fish, ice cream, vegetables etc.
---|---
Cooler compartment shelves| Food items inside pots, capped plate and capped cases, eggs (in capped case)
Cooler compartment door shelves| Small and packed food or beverages
Vegetable bin| Fruits and vegetables
Fresh food compartment| Delicatessen (breakfast food, meat products to be consumed in short notice)

6.15 Door open alert (Optional)
An audible alert will be heard if the product’s door remains open for at least 1 minute. The audible alert will stop when the door is closed or any button on the display (if available) is pressed.
Door open alert is indicated to the user both audibly and visually. Interior lighting will turn of if the warning continues for 10 min.
6.16 Changing the opening direction of the door
You can change the direction of opening of your refrigerator depending on the location where you use it. When you need this, consult the closest Authorized Service.
6.17 Interior light
Interior light uses a LED type lamp. Contact the authorized service for any problems with this lamp.
Lamp(s) used in this appliance cannot be used for house lighting. Intended use of this lamp is to help the user place food into the refrigerator / freezer safely and comfortably.

Maintenance and cleaning

Service life of the product is increase if it is regularly cleaned
WARNING: First unplug the product before cleaning your refrigerator.

Never use any sharp and abrasive tools, soap, household cleaners, detergent and wax polish for cleaning.
Dissolve one teaspoon of carbonate in half liter of water. Soak a cloth with the solution and wrung it thoroughly. Wipe the interior of the appliance with this cloth and the dry thoroughly.
Make sure that no water enters the lamp housing and other electrical items.
Clean the door with a damp cloth. To remove door and body shelves, remove all of its contents. Remove door shelves by moving them upwards. After cleaning, slide them from top to bottom to install.
Never use cleaning agents or water that contain chlorine to clean the outer surfaces and chromium coated parts of the product. Chlorine causes corrosion on such metal surfaces.
Do not use sharp, abrasive tools, soap, household cleaning agents, detergents, kerosene, fuel oil, varnish etc. to prevent removal and deformation of the prints on the plastic part. Use lukewarm water and a soft cloth for cleaning and then wipe it dry.

7.1 Avoiding bad odors
Materials that may cause odor are not used in the production of our appliances. However, due to inappropriate food preserving conditions and not cleaning the inner surface of the appliance as required can bring forth the problem of odor.
Therefore, clean the refrigerator with carbonate dissolved in water every 15 days.

Keep the food in closed containers.
Microorganisms spreading out from uncovered containers can cause unpleasant odours.
Never keep the food that have expired best before dates and spoiled in the refrigerator.

7.2 Protecting the plastic surfaces
Clean with arm water immediately as the oil may cause damage on the surface when it is poured on plastic surfaces.

Troubleshooting

Please review this list before calling the service. This will save you time and money. This list contains frequently encountered problems that are not results of faulty workmanship or material use. Your product may not have some of the features described here.
The refrigerator is not operating.

It may not be plugged in properly. >>>Plug in the product properly.
The fuse of the socket to which your refrigerator is connected or the main fuse may have blown. >>>Check the fuse.

Condensation on the side wall of the fridge compartment (MULTI ZONE, COOL CONTROL and FLEXI ZONE).

The door may have been opened/closed frequently. >>>Do not open/close the refrigerator door frequently.
The environment may be too humid. >>>Do not install the refrigerator at locations with a very high level of humidity.
Foods containing liquid may have been placed into the refrigerator in vessels without covers. >>>Do not place foods containing liquid into the refrigerator in unsealed vessels.
Door of the refrigerator may have been left ajar. >>>Do not keep the doors of your refrigerator open for a long time.
The thermostat may have been set to a very cold level. >>>Set the thermostat to an appropriate level.

The compressor is not operating.

Protective thermal of the compressor will blow out during sudden power failures or plug-out plug-ins as the refrigerant pressure in the cooling system of the refrigerator has not been balanced yet. The refrigerator will start running approximately after 6 minutes. Please call the Authorised Service Provider if the refrigerator does not start at the end of this period.
The freezer is in defrosting cycle. >>>This is normal for a refrigerator that performs full-automatic defrosting. Defrosting cycle is performed periodically.
The refrigerator may not be plugged in. >>>Make sure that the plug fits the socket.
Temperature settings may be incorrect. >>>Select the correct temperature value.
Possible power failure. >>>The refrigerator will start to operate normally when power restores.

The operation noise increases when the refrigerator is running.

Operating performance of the refrigerator may vary based on the ambient temperature changes. This is normal and not a fault.

The fridge is running frequently or for a long time.

Your new product may be bigger than the previous one. Larger refrigerators operate for a longer period of time.
The room temperature may be high. >>> It is normal that the product operates for longer periods in hot environments.
The refrigerator may have just been plugged in or loaded with food. >>>lt takes the product longer to reach the set temperature when it has just been plugged in or loaded with food. This is normal.
Large amounts of hot food may have been placed into the refrigerator recently. >>>Do not place hot foods into the refrigerator.
The doors may have been opened frequently or left ajar for a long time. >>>The warm air that enters the refrigerator causes it to operate for a longer period of time. Do not open the doors frequently.
Freezer or fridge compartment door may have been left ajar. >>> Check if the doors are closed completely.
The appliance may be set to a very low temperature. >>> Set the refrigerator temperature to a warmer degree and wait until the product reaches this temperature.
Door seal of the fridge or freezer compartment may be soiled, worn out, broken or not properly seated. >>> Clean or replace the seal. Damaged/broken seal causes the refrigerator to run for a longer period of time to maintain the current temperature.

Fridge temperature is adequate but the freezer temperature is very low.

The freezer compartment temperature may be set to a very low value. >>> Set the freezer compartment temperature to a higher value and check.

Freezer temperature is adequate but the fridge temperature is very low.

The fridge temperature is adjusted to a very low value. >>> Adjust the fridge temperature to a higher value and check.

Food kept in the fridge compartment drawers is frozen.

The fridge compartment temperature may be set to a very high value. >>> Set the fridge compartment temperature to a lower value and check.

Temperature in the fridge or freezer is very high.

The fridge compartment temperature may be set to a very high value. >>> Fridge compartment temperature setting has an effect on the temperature of the freezer.
Change the temperature of the fridge or freezer compartment until the fridge or freezer compartment temperature reaches an adequate level.
The doors may have been opened frequently or left ajar for a long time. >>>Do not open the doors frequently.
The door may have been left ajar. >>>Close the door completely.
The refrigerator may have been just plugged in or loaded with food. >>>This is normal.
It takes the product longer to reach the set temperature when it has just been plugged in or loaded with food.
Large amounts of hot food may have been placed into the refrigerator recently. >>>Do not place hot foods into the refrigerator.

Vibration or noise.

The floor may not be stable or level. >>>If the refrigerator shakes when moved slightly, adjust the feed to balance it. Make sure that the floor is level and capable of carrying the refrigerator.
Objects placed onto the refrigerator may cause noise. >>>Remove the objects on the refrigerator.

There are noises coming from the refrigerator like liquid spilling or spraying.

Liquid and gas flows occur in accordance with the operating principles of the refrigerator. >>>This is normal and not a fault.

Whistle is heard from the refrigerator.

There are fans that are used to cool the refrigerator. This is normal and not a fault.

Damp accumulates on the inner walls of refrigerator.

Hot and humid weather increases icing and condensation. This is normal and not a fault.
The doors may have been opened frequently or left ajar for a long time. >>>Do not open the doors frequently. Close the doors, if open.
The door may have been left ajar. >>>Close the door completely.

Humidity occurs on the outer surface of the refrigerator or between the doors.

Air might be humid. This is quite normal in humid weathers. >>>Condensation will disappear when the humidity level decreases.
There might be external condensation at the section between two doors of the refrigerator if you use your product rarely. This is normal. Condensation will disappear upon frequent use.

There is a bad odour inside the refrigerator.

No regular cleaning may have been performed. Clean the inside of the refrigerator with a sponge, lukewarm water or carbonated water.
Some vessels or packaging materials may cause the odour. >>>Use another vessel, or packaging materials from another brand.
Foods may have been placed into the refrigerator in vessels without covers. >>>Store the foods in closed vessels. Microorganisms emitted from vessels without a cover may cause unpleasant odours.
Take out expired or spoiled foods from the refrigerator.

The door cannot be closed.

Food packages may be preventing the door from closing. >>> Re-locate the packages that are obstructing the door.
The refrigerator may be unstable on the floor. >>>Adjust the refrigerator feet as required to keep the refrigerator in balance.
The floor may not be level or solid. >>>Make sure that the floor is level and capable of carrying the refrigerator.

Crispers are stuck.

Foods may be touching the upper wall of the crisper. >>>Re-organise the foods in the crisper.

If The Surface Of The Product Is Hot.
High temperatures may be observed between the two doors, on the side panels and at the rear grill while the product is operating. This is normal and does not require service maintenance!
Fan keeps running when the door is open.
The fan may keep running when the door of the freezer is open.
WARNING: If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorised Service Provider. Never attempt to repair a malfunctioned product.

DISCLAIMER/WARNING
Some (simple) malfunctions may be repaired by end users without creating any safety issue or causing unsafe usage provided that they are carried out under the following instructions. (Please see the section “I Want to Repair Myself”.)
For this reason, except for parts specified at the section “I Want to Repair Myself” as could be repaired by end users, repair by an authorized service station is definitely suggested for the purpose of preventing any safety issues and this is required so that Beko product warranty may continue.
I WANT TO REPAIR MYSELF
Repair that will be carried out by end users can be performed within the following spare parts: Door Handles and Door Hinges, Door Joints and peripheral Trays, Baskets, Racks. (You may have access to current list of spare parts from https://www.beko.com./destek as of 1 March 2021)
Further, in order to ensure product safety and to prevent risk of severe injuries, repair has to be carried out according to instructions from user manual or https://www.beko.com.tr/destek. For your own safety, please unplug product prior to carrying out any repair.
Beko may not be held responsible for safety issues that may arise because of repairs or attempts not carried out in accordance with instructions specified at user manuals or located at https://www.beko.com.tr/destek and performed on parts other than parts contained at current list of parts accessed from https://www.beko.com.tr/destek. In such a case, Beko product warranty will be invalid.
For this reason, we strongly recommend end users to avoid carrying out repairs for parts other than above-mentioned spare parts themselves and apply to an authorized service station in case of requirement. Such repair attempts by end users may cause safety issues, may damage product and may cause fire, flood, electrocution and severe personal injuries afterwards.
Including but not limited to the listed items, repairs of the following parts have to be performed by authorized service stations: Compressor, Cooling system elements, Motherboard, Inverter card, Display card, etc.
Manufacturer/dealer may not be held responsible for any circumstances where end users fail to act in accordance with the foregoing.
This product is equipped with a lighting source of the “G” energy class.
The lighting source in this product shall only be replaced by professional repairers.