LISCIANI 97050 Barbie Print Cam Hi Tech Instruction Manual

June 13, 2024
LISCIANI

LISCIANI 97050 Barbie Print Cam Hi Tech

LISCIANI-97050-Barbie-Print-Cam-Hi-Tech-product

Product Information:

  • Display: 3.5-inch color screen
  • Supported Memory Card: up to 32 GB

Product Usage Instructions

Installation and Replacement of the Roll of Printing Paper:

  1. Push the side levers to lift the cover of the paper container.
  2. Remove the old roll of paper and replace it with the new one (as shown above).
  3. Close the cover.

How to Use:

  1. Rear Camera: Capture photos and videos using the rear camera.
  2. Charging Port: Connect the camera to a power source for charging.
  3. Printing Container: Place the roll of printing paper in this container.
  4. Micro SD Card Port: Insert a micro SD card for storing photos and videos.
  5. Front Camera: Switch to the front camera for taking selfies.
  6. Photo/Confirm Key: Press this key to take photos or confirm selections.
  7. Front/Rear Camera Switch Key: Switch between front and rear cameras.
  8. Gallery Key: Access the photo gallery to view saved photos.
  9. Up Scroll Key: Scroll up in the menu or gallery.
  10. Down Scroll Key: Scroll down in the menu or gallery.
  11. On/Off/Back Key: Turn the camera on/off or go back to the previous screen.
  12. Print Key: Print selected photos.

Function Icons:

  1. Photo Icon: Select to capture photos.
  2. Video Icon: Select to record videos.
  3. Gallery Icon: Access the photo gallery.
  4. Self-timer Icon: Enable self-timer for delayed photo capture.
  5. Information Icon: Access camera information.
  6. Settings Icon: Access camera settings.

Using the Camera:
From the home screen, use the scroll keys to select icons and press the photo/confirm key to select the function.

  1. Photo Function: Use the up and down scroll keys to scroll through Barbie’s photo frames. Press the Print key to print the photo. To take a selfie, press the front/rear camera switch key to activate the front camera. To keep a photo on the device without printing it, in photo mode, press the photo/confirm key.

Warning: The last function is only possible if a micro SD card has been inserted in the camera. Without a micro SD card, it is not possible to keep photos and videos in the camera.

Data Transfer to a PC:
To transfer photos and videos to a PC, insert a micro SD card into the camera and connect it to a PC using the provided cable. You can then copy the files to the PC.

WARNING

  • Avoid direct sunlight and heat sources
  • Do not throw or shake the camera to avoid damaging any components or parts.
  • Avoid contact with benzene, thinners or other chemical products.
  • Do not use while riding a bike or driving a car or motorbike to avoid danger.
  • Clean the camera carefully with a soft and dry cloth.
  • It is recommended to turn off the camera when it is not in use for a prolonged time

How to charge

When the battery icon displays the camera must be recharged

  • Do not use the camera while it is charging
  • Connect the charger to the charging cable supplied
  • Recommended specs for the adaptor (not included): Dc5v— 1.0A
  • Your camera will be fully recharged after about 4-6 hours.

Technical specs

  • Display: 3.5” colour screen
  • Memory card supported: up to 32 GB

Installation and replacement of the roll of printing paper:

  1. Push the side levers to lift the cover of the paper container.
  2. Remove the old roll and replace it with the new one (as shown above).LISCIANI-97050-Barbie-Print-Cam-Hi-Tech-fig- \(2\)
  3. Close the cover.

Instructions for use

LISCIANI-97050-Barbie-Print-Cam-Hi-Tech-fig- \(4\) LISCIANI-97050-Barbie-Print-Cam-Hi-Tech-fig- \(5\)LISCIANI-97050-Barbie-Print-Cam-Hi-Tech-fig-
\(6\)

From the home screen, use the scroll keys to select icons and press the photo / confirm key to select the function.

  1. Photo function: Press the up and down scroll keys to scroll through Barbie’s photo frames and press the Print key to print the photo. To take a selfie, just press the front / rear camera switch key to activate the front camera. To keep a photo on the device without printing it, in photo mode, press the photo / confirm key.
    Warning: this last function is only possible if a micro SD card has been inserted in the camera, otherwise it is not possible to keep photos and videos in the camera.

  2. Video function: After entering video mode, press the photo / confirm key to record and then press the key again to stop recording.
    Warning : this last function is only possible if it has been inserted in the camera a micro SD card, otherwise it is not possible to record videos.

  3. Gallery function: After selecting the gallery icon, you can scroll through the photos and videos, using the scroll keys. any time, by pressing the print key, you can print the photo. To delete a photo or video, just press the Duplex Camera Switch key then press the Photo /Confirm key to delete a file or delete all files. Immediately after, press the “Photo / Confirm” key again to complete cancellation.

  4. Self-timer function: after pressing the Photo / Confirm key the camera will start a 5 second countdown, at the end of which it will take a photo and save it in the gallery.

  5. Information function : in this mode it is possible to consult the software version of the camera.

  6. Settings : after entering the setting mode, you can choose a setting by pressing the photo / confirmation key

  7. Resolution: set the resolution of the video recording

  8. Image quality: set the size of the image quality

  9. Print density: set the density of the printing ink

  10. Loop recording: set the duration of the recording time

  11. Photo time: set the duration of the photo by time

  12. Date display: to display or not the date and time on the photo

  13. Continuous shooting: to have continuous shots in sequence or less

  14. Date / time: to set the date and time

  15. Auto power off: to set the automatic shut-off time

  16. Screen saver: to set the automatic screen standby time

  17. Key sound: to activate or deactivate the sound of the keys

  18. Language selection: change the language

  19. Formatting: to delete all files

  20. Default setting: restore factory settings

Transferring data to a PC

To transfer photos and videos to a PC, first insert a micro SD card into the camera and then connect the camera to a PC using the cable supplied. Now you can copy the files to your PC.

©Liscianigiochi S.p.A.
Via Ruscitti 16, Zona Industriale S. Atto, 64100 Teramo, ITALY +39 0861.2311 www.liscianigiochi.com

BARBIE™ and associated trademarks and trade dress are owned by, and used under license from, Mattel. ©2022 Mattel.

REF.97050c

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals