NearStream AWM10T Wireless Multicam Livestreaming User Manual
- June 13, 2024
- NearStream
Table of Contents
USER MANUAL
AWM10T Wireless Multicar Livestreaming
| ① Built-in microphone | ⑤ Power button |
|---|---|
| ② Status indicator light | ⑥ Status indicator light |
| ③ Type-C charging interface | ⑦ Type-C interface |
| ④ Back clip | ⑧ Type-C charging interface |
Product Specifications
| Product Specifications | 2400~2483.5MHZ |
|---|---|
| Polar pattern | Omnidirectional |
| Wireless transmission | 20Hz-20KHz |
| Frequency range | 32kHz |
| Sampling rate | ≥64db |
| SNR | ≥ 10m(Barrier-free distance) |
| Transmission range | 6h |
| Battery life | 1.5h |
| Charging time | 80mAh |
| Battery voltage and capacity | 5V 1A |
| Input rating | TX: L54 W18 T20mm (with back clip ) |
RX: L45 W25 T8mm (with USB )
Note: The working frequency band and wireless transmission power of the
device may vary according to different countries and regions.
Warnings:
Please read the following safety instructions before using the product.
- Please store the product in a cool and dry place. Do not use it in a humid environment.
- Do not expose batteries or battery-equipped devices to extremely high temperatures, such as sunlight and open flames.
- If the battery is not replaced properly, it will explode. It should only be replaced with the same type of battery.
- Do not replace the lithium battery by yourself. If the battery is damaged, contact professional personnel.
- Do not disassemble the product for maintenance or replacement of accessories without authorization. For the repair service, please consult the official sales support.
- Please purchase the attachments/accessories specified by the manufacturer.
- Please clean the product with dry cloth.
- Properly dispose of packaging materials, equipment, battery, and other electronic components to avoid damage to the environment.
- Do not use the product at a high volume for a prolonged period of time to avoid hearing damage.
- Do not use the product while walking, driving or riding to avoid traffic accidents.
EU Conformity Statement
This product complies with the applicable CE marking directives and standards:
Electromagnetic Compatibility (EMC) Directive 2014/30/EU. Low Voltage (LVD)
Directive 2014/35/EU. Restrictions of Hazardous Substances (RoHS) Directive
2011/65/EU and its amending Directive (EU) 2015/863.
Hereby, we declare that the product is compliance with Radio Equipment
Directive (RED)
2014/53/EU. The full text of the EU declaration of conformity is available at
the internet address as shown on the packing box.
This product can be used across EU member states.
The frequency, mode and the maximum transmitted power in EU are listed below:
– 2400-2483.5MHz: < 20 dBm (EIRP) ( for 2.4G product only)
2012/19/EU (WEEE directive)
** Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collection points.
For more information see: www.recyclethis.info
Battery Directive-2013/56/EC
** Battery in the product complies with the European Battery Directive
2013/56/EC. For proper recycling, return the battery to your supplier or to a
designated collection point.
WARNING
There is a danger of explosion if the battery is incorrectly replaced. Replace
it only with the same or equivalent type. Do not expose it to excessive heat
such as sunshine, fire, etc. The battery cannot be replaced by the user. If
the battery is damaged and needs to be replaced, please contact qualified
service personnel.
WARNING
High sound Pressure
To avoid hearing damage, do not listen for long periods at high volume. Do not
turn the volume so high that you’re unable to hear your surroundings. Do not
use the unit while walking, driving or cycling. Doing so may cause traffic
accidents. Do not use at a dangerous place unless the surrounding sound can be
heard.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.