ATETOOL AE970D Soldering Station User Manual

ATETOOL AE970D Soldering Station

Product Information

Product Name: AE988/AE988D/AE970/AE970D Soldering Station
Model Numbers: – AE988 – AE970 – AE988D – AE970D

Packing List:

• Main unit: 1pc
• Handle: 1pc
• Iron stand: 1pc
• User manual: 1pc
• Brass wool: 1pc

Specifications: Main Unit (AE988/AE970):

• Total Power: 70W
• Output Voltage: 25VAC
• Temperature Range: 200°C – 480°C (392°F – 896°F)
• Temperature Stability: ±5°C (±9°F)
• Dimension: 148x120x85mm
• Weight (power cable excluded): 1.32kg Main Unit (AE988D/AE970D):
• Total Power: 80W
• Output Voltage: 25VAC
• Temperature Range: 50°C – 500°C (122°F – 932°F)
• Temperature Stability: ±5°C (±9°F)
• Dimension: 150x550mm (302°F – 1022°F)
• Weight (power cable excluded): 1.33kg Handle:
• Power Consumption: 65W (AE988/AE988D), 75W (AE970/AE970D)
• Tip to Ground Impedance: N/A
• Tip to Ground Voltage: N/A

Product Usage Instructions

1. Unpacking:
   • Open the packaging box and take out all the components.
   • Make sure you have the following items: main unit, handle, iron stand, user manual, and brass wool.
2. Assembly:
   • Attach the handle to the main unit by aligning the connectors and firmly pushing them together.
   • Place the iron stand on a stable surface near your working area.
3. Power Connection: – Plug the power cable into the power outlet.
   • Connect the other end of the power cable to the main unit.
4. Temperature Adjustment: – Turn on the soldering station by pressing the power button located on the main unit.
   • Use the temperature adjustment buttons to set the desired temperature for your soldering task.
   • Wait for the station to reach the set temperature before starting your work.
5. Soldering:
   • Hold the handle and grasp the soldering tip with a pair of pliers or tweezers.
   • Touch the tip to the solder joint and apply solder to create a secure connection.
   • Move the soldering iron smoothly along the joint to ensure even heat distribution.
   • After completing the soldering task, place the soldering iron on the iron stand.
6. Cleaning and Maintenance:
   • Use the brass wool provided to clean the soldering tip after each use.
   • Regularly inspect the soldering station for any signs of damage or wear.
   • Follow the maintenance instructions provided in the user manual for proper care of the product.

Note: Always follow safety precautions and guidelines mentioned in the user manual to ensure safe and effective use of the soldering station.

Packing List

• Main unit: 1pc
• Handle: 1pc
• Iron stand: 1pc
• User manual: 1pc
• Brass wool: 1pc

Product Specification

Main Unit
Output voltage| 25VAC| | | |
Temperature range| 200－480℃(392-896℉)| 50 500 (122-932℉)| 150 550 (302-1022℉)
Temperature stability| ±1℃（±1.8℉）{〉200℃(400℉)}
Dimension| 148x120x85mm
weight（power cable excluded）| 1.32kg| 1.32kg| 1.33kg| 1.334kg
Handle
Power consumption| 65W| 75W| 65W| 75W
Tip to ground

impedance

| <2Ω
Tip to ground voltage| PTC ceramic| <2mV| PTC ceramic| |
Heating element| heater| Integrated tip

1.2m

| heater| Integrated tip
Cable length|
Weight| 79g| 68g| 79g| 68g
Note: specifications and appearance are subject to change for product improvement without prior notice

Safety and Precautions

The precautions in this manual are divided into the following [warning] and [attention].
Please fully understand the content.

Warning: misuse may cause death or serious injury to the user

Note: misuse may cause injury to users or substantial damage to objects involved

For your own safety, please strictly abide by the following precautions

Warning

When power is on, the temperature of the soldering iron tip might reach to 50 ~ 550 ℃ (120 ~ 1022℉).
Misuse may cause burns and fire, please strictly observe the following precautions:

• Do not touch the soldering iron tip or the metal part around it while using
• Do not use it around combustibles
• Inform the people around of the potential risk caused by high temperature
• Turn the power off when not in use
• Before replacing parts or tip, turn off the power and wait till the iron tip cools down
• Do not use this product if you are inexperienced or have no sufficient necessary knowledge without the guidance of related qualified personnel
• Please keep it out of reach of children
• If the power cord is damaged, please ask the manufacturer or its service agent or similar qualified personnel to repair it, so as to avoid personal injury or damage to product

Please strictly observe the following precautions, otherwise it may cause injuries or death

• Do not use this product for works other than soldering
• Do not hit the handle hard for removing the tin on the iron tip
• Do not modify this product
• When replace parts, must use original ATETOOL parts
• Do not soak the product in water or use it with wet hands
• Unplug it properly after using
• Smoke will be emitted during soldering, please use it in open space
• Do not engage in other dangerous acts with this product

Using Method(AE988D/AE970D)

Operation and display instructions

Panel display:

• LED segment: digital display
• Indicator: indicates the statement of heater (light on/off means power on/off)
• Function key: function operation
• Knob: to adjust temperature
• Calibration hole: for calibrate the temperature

Turn on the power switch

After switching on, indicator lights up and LED segment displays for 1 second, now power is on.
And then it displays the temperature unit or for 1 second, so you know which unit is used right now. If the standby function is enabled in this soldering station, will be displayed for 1 second to show standby function is available. Then displays the set temperature for 1.5 seconds, and finally displays the real time temperature. When the temperature is stable, indicator will flash.

Note: when not in use, please put the soldering iron on the holder. If it won’t be used for a while, please cut off the power supply.

After use

After use, please clean the soldering iron tip and apply new solder on it.

Temperature unit conversion
First press function key, in the meanwhile switch on the power, till LED segment displays , release the function key, now the temperature unit changes. If it was Fahrenheit, now switch to Celsius, and vice versa.

Temperature adjustment

Temperature range
AE988D：50-500℃（122-932℉）
AE970D：150-550℃（302-1022℉, note: as LED segment shows only 3 digits, 1022 will be displayed as A22,“A” represents digit “10”）

Temperature adjusted by knob.

Screen brightness setting

1. Press and hold the function key till the the screen displays , to enter the brightness setting.
2. Show the current digital display brightness level – .
3. Adjust the brightness level through the knob: gear 1-6.
4. Press the function key or wait for 10s to automatically save to complete the setting.

Standby and sleep functions

Standby function on and off:

1. Press and hold the function key til l display on LED segment to enter the standby function on/off setting:
2. Display the current setting or
3. Adjust by knob: or to turn on/off the standby and sleep function.
4. Press the function key or wait for 10s to automatically save to complete the setting.

Standby function

1. When standby function is turned on, the soldering station will enter standby mode after not in use for 10 minutes.
2. In standby mode, LED segment displays and temperature drops to 250 ℃ (482 ℉).
3. When any operation is detected, such as using the soldering iron, adjusting knob or pressing the function key,it will return to the work mode.
4. When in standby mode, if no further operation is detected for 10 minutes, it will enter sleep mode.

Sleep function:

1. That short press the function key or long time in standby mode can make it enter sleep mode:
2. When entering sleep mode, screen displays and heating is turn off.
3. Press the function key to return to normal heating work mode.

Temperature locking function:

Temperature locking function on and off:

1. Turning the knob to adjust the temperature to be set.
2. Long press the function key till is displayed.
3. Now LEd segment displays or
4. Turn the knob to set the locking function to be or
5. Press the function key or wait for 10s to automatically save to complete the setting.
6. When the temperature is locked, adjusting the knob does not change the setting temperature, it will display for 1 second to show that the current temperature is locked.

Temperature calibration

1. Adjust the set temperature to 350 ℃ (662 ℉) by knob and wait for 2 minutes to stabilize the temperature.
2. Use a thermometer to measure the temperature of the soldering iron tip.
3. Use a cross screwdriver to adjust the calibration hole to make the displayed temperature value equal to the measured value. For example, if the measured value is 345 ℃, adjust calibration hole to reduce display temperature 350 to 345, make the display temperature match the measured value.
4. Press the function key to complete calibration.

Using Method（AE988/AE970）

Operation and display instructions

• Indicator: indicate the power state(light on/off means power on/off)
• Knob: adjust the temperature
• Calibration hole: for calibrate the temperature

Switch on the power

After the power is on, indicator lights up, and the soldering station starts heating up according to the set temperature. After the temperature is stable, indicator flashes.

Note: when not in use, please put the soldering iron on the holder. If it won’t used for a while, please cut off the power supply.

Temperature adjustment

• Temperature range: AE988/AE970：200-480℃（392-896℉）.
• Temperature adjusted by knob.

Temperature calibration

1. Adjust the set temperature to 350 ℃ (662 ℉) by knob and wait for 2 minutes to stabilize the temperature.

2. Use a thermometer to measure the temperature of the soldering iron tip.

3. Use a cross screwdriver to adjust calibration hole to make the measured value equal to set temperaure.
   For example, if measured value is 345℃, adjust calibration hole to increase it to 350, make the measured value match set temperature.

4. Temperature calibration completed.

Maintenance

In order to make this product durable, please maintain it regularly. The lifespan of this product depends on the used temperature, quality of solder wire and soldering paste, frequency of use etc. Please repair and maintain it according to specific use conditions

Warning
Please pay close attention when the soldering station is in use at high temperature, cut off the power and unplug the power cord after use.

Soldering iron tip maintenance

1. Set the temperature to 250 ℃ (480 ℉).
2. After the temperature is stable, clean the soldering iron tip with a brass wool and check its condition.
3. If black oxide is attached to it, please apply new solder (including flux) and wipe it repeatedly with a brass wool until it’s clean, then apply some new solder.
4. If the soldering iron tip has been deformed, perforated or worn out, please replace it with a new one.

Troubleshooting Guide

Warning

• When checking or replacing parts, be sure to pull out the power plug to prevent electric shock
• If the power cable is damage, it must be sent to the manufacturer, agency store or maintenance personnel with the same qualification for repair to avoid accidents

Not working after

power is on

| Check whether the power cord is good, or plug falls off|

Connect the power supply well

Is the fuse OK

| Figure out the cause of fuse damage:

1. Short circuit inside the station.

2. Inside the handle, the spring might meets the

heating element.

3. Check whether the pin of heating element is

twisted or short circuited.

Even if the cause is unknown, please replace the fuse. If the fuse get burnt out again, please return the handle with the main unit for maintenance.

The display shows “S-E”

| Whether the handle cable is well

connected with main unit

| Reconnected
Whether the wire connecting to

handle is broken

| If so please replace it with a new handle

Whether the heater is damaged (the resistance of the blue lead wire shall be less than 100 Ω at room temperature).

|

If damaged, replace the heater

The display shows “H-E”

| Whether the wire connecting to

handle is broken

| If so please replace it with a new handle
Whether the heater is damaged (the resistance of the red lead wire shall be less than 100 Ω at room temperature)|

If damaged, replace the heater

Iron tip heating is on and off

|

Whether the wire connecting to

handle is broken

|

If so please replace it with a new handle

The solder won’t get on

the iron tip

| Check whether the temperature of

the iron tip is too high

| Adjust to the proper temperature
Check whether there is oxide on

the tip

|

Clean the oxide with a brass wool

Iron tip temperature is too low

|

Check whether there is oxide on

the tip

|

Clean the oxide with a brass wool

Whether the temperature is proper

|

Adjust to the proper temperature

The iron tip won’t fit

|

Whether there is oxide inside tip, or

soldering iron tip expands

|

Change the tip and heater

Not original tip or not same type tip

|

use original factory tip or same type tips

The actual temperature

can’t reach

|

Is the temperature adjusted correctly

|

Adjust the set temperature again

Haven’t done temperature calibration

for a long time

| Re-calibrate temperature accordingly

T900M series soldering tips（AE988/AE988D)

(More soldering tips information please contact us)

T80 series soldering tips（AE970/AE970D)

(More soldering tips information please contact us)

Shenzhen ATETOOL Co.,Ltd.
Address：5F, 1-2# Building, Tongfuyu Industrial Zone, Aiqun Rd, Shiyan Subdistrict, Bao’an,Shenzhen, 518108, China
Tel：(0086) 755 2340 8754 ext. 807
URL：www.atetool.com

References

• soldering iron station china supplier - ATETOOL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>