ARCHETYPE CHF 485 Rogue Automatic Watch Instruction Manual
- June 4, 2024
- ARCHETYPE
Table of Contents
CHF 485 Rogue Automatic Watch
Instruction Manual
Rogue Automatic Watch
ROGUE AUTOMATIC
DORIAN AUTOMATIC
ARCHER AUTOMATIC
PLEASE READ BEFORE USE
Prior to setting the time, Archetype mechanical movements must be given an
initial hand winding to power up the mainspring.
[Approximately 40 clockwise turns when the crown is in the normal position]
SETTING THE TIME
- Pull the crown out to the 1st position.
- Turn the center hands clockwise to set the Home Time.
- As the center hands move, the corresponding Day/Night display moves as well.
- Push the crown back in to the normal position after setting the time.
SETTING THE DUAL TIME
- Pull the crown out to the 1st position.
- Turn the center hands counterclockwise to set the preferred Dual Time. (the Dual Time hand at 9 o’clock will simultaneously move clockwise)
- Now turn the center hands clockwise to set the Home Time.
- Push the crown back in to the normal position after setting the time.
PLEASE NOTE:
Your Archetype watch MUST be worn for at least eight (8) hours each day to
ensure it is fully wound. An automatic watch will only wind when the watch is
on your wrist and your arm moves. Winding the watch by the crown will power up
the mainspring but not enough to allow the watch to fully function. If your
watch stops overnight, runs fast, or runs slow this means the movement is not
being fully wound. We recommend hand-winding your movement before you put it
on your wrist and then wearing the watch for at least 8 hours a day.
WATCH WINDER SETTINGS
Both directions. 950 turns per day
NEMESIS AUTOMATIC
PLEASE NOTE:
Your Archetype watch MUST be worn for at least eight (8) hours each day to
ensure it is fully wound. An automatic watch will only wind when the watch is
on your wrist and your arm moves. Winding the watch by the crown will power up
the mainspring but not enough to allow the watch to fully function. If your
watch stops overnight, runs fast, or runs slow this means the movement is not
being fully wound. We recommend hand winding your movement before you put it
on your wrist and then wearing the watch for at least 8 hours a day.
WATCH WINDER SETTINGS
Clockwise. 950 turns per day
PLEASE READ BEFORE USE
Prior to setting the time, Archetype mechanical movements must be given an
initial hand winding to power up the mainspring. [Approximately 40 clockwise
turns when the crown is in the normal position]
SETTING THE TIME
- Pull the crown out to the 1st position.
- Turn the crown clockwise to set the time.
- Push the crown back in to the normal position after setting the time.
CASPIAN AUTOMATIC
PLEASE READ BEFORE USE
Prior to setting the time, Archetype mechanical movements must be given an
initial hand winding to power up the mainspring.
[Approximately 40 clockwise turns when the crown is in the normal position]
SETTING THE TIME
PLEASE NOTE:
Your Archetype watch MUST be worn for at least eight (8) hours each day to
ensure it is fully wound. An automatic watch will only wind when the watch is
on your wrist and your arm moves. Winding the watch by the crown will power up
the mainspring but not enough to allow the watch to fully function. If your
watch stops overnight, runs fast, or runs slow this means the movement is not
being fully wound. We recommend hand-winding your movement before you put it
on your wrist and then wearing the watch for at least 8 hours a day.
WATCH WINDER SETTINGS
Both directions (Clockwise or Counter-clockwise). 950 turns per day
- Pull the crown out to the 1st position.
- Turn the crown clockwise to set the time.
- Push the crown back in to the normal position after setting the time.
LOYALIST AUTOMATIC
PLEASE READ BEFORE USE
Prior to setting the time, Archetype mechanical movements must be given an
initial hand winding to power up the mainspring.
[Approximately 40 clockwise turns when the crown is in the normal position]
SETTING THE TIME
- Pull the crown out to the 1st position.
- Turn the crown clockwise to set the time.
- Push the crown back into the normal position after setting the time.
SETTING THE CALENDAR
- To set the date, press the Pusher A (date setting button).
- To set the month, press the Pusher B (month setting button).
- To set the day of the week, use a small pointed object to press the recessed Pusher C (day setting button).
PLEASE NOTE:
Your Archetype watch MUST be worn for at least eight (8) hours each day to
ensure it is fully wound. An automatic watch will only wind when the watch is
on your wrist and your arm moves. Winding the watch by the crown will power up
the mainspring but not enough to allow the watch to fully function. If your
watch stops overnight, runs fast, or runs slow this means the movement is not
being fully wound. We recommend hand winding your movement before you put it
on your wrist and then wearing the watch for at least 8 hours a day.
WARRANTY
Archetype gladly offers a limited warranty covering defects in materials and
manufacturing for a period of one (1) year after the original purchase date
from an authorized Archetype retailer. This warranty does not cover case,
crystal, crown, pushers, straps, or any changes that occur during use and not
from manufacturing or assembly. This warranty is considered void if you open
your case back, push the buttons underwater, or expose your watch to moisture
beyond the recommendation of the watch’s water resistance rating. Proof of
purchase is required for all warranty claims, so please save a copy of your
receipt. Archetype reserves the right to not accept a warranty claim if a
watch has evidence of excessive wear or misuse. Archetype reserves the right
to repair or replace any watch returned for service at our option.
WATCH WINDER SETTINGS
Both directions (Clockwise or Counter-clockwise). 950 turns per day
WATER RESISTANCE CHART
3 ATM| Splash Resistant.
Not intended for any prolonged exposure to water.
---|---
5 ATM| Normal Daily Wear.
Suitable for washing hands or light rain. No showers.
10 ATM| Water Sports.
Suitable for swimming, surfing, etc.
30 ATM| Scuba Diving.
Suitable for extreme ocean depths.
Do not expose your watch to high-temperature water (i.e. hot tubs/showers) as
this will void the warranty.
