BX600 Cyclone Range Hood Instruction Manual
- June 13, 2024
- Cyclone
Table of Contents
BX600 Cyclone Range Hood
Product Information
- Product Name: BX600
- Manufacturer: Cyclone Range Hoods Inc.
- Model: BX600
- Fan Speeds: Three speed settings
- Grease Disposal: Nonstick-coated fan blades separate grease from the air and deposit it into a grease cup for easy disposal
- Light Control: Adjustable light control
- Fan Control: Adjustable fan control
- Maintenance: Baffle filters can be removed for cleaning, exterior maintenance required
- Replaceable Parts: Grease cup, baffle filters, LED light bulb
OPERATION INSTRUCTIONS
Fan Operation
Fan Speeds: Three speed settings give the customer total control of their fan
at the push of a button.
Grease Disposal
WARNING! Do not remove filters immediately after cooking or if grease is
still hot.
Nonstick fan blades will separate grease from the air and the grease will then
be deposited into the baffle filters, convenient disposal.
Tip: Soak all parts in soapy water if there is heavy grease.
Changing Light bulbs
WARNING! Ensure that lights have fully cooled before changing bulbs.
Ensure that the light switch is not on while changing lights, the unit does
not need to be unplugged/ shut off. If you have halogen lights, ensure that
the lights have fully cooled before changing the bulbs.
- Remove the grease filters and push the light case downward from the machine.
- Disconnect the connecting wires of the light socket from the wires that travel to the motherboard of the unit and the light will be free.
LED Lights:
Discard the disconnected light assembly and install the new one.
*The style of the light may have changed; all wall mounted range hoods use the same shape light.
MAINTENANCE
Baffle Filters With Latches:
Removal: In order to remove the baffle filters, pull the latch down with one
hand on the filter to support it and pull the filter downwards and away from
the machine.
The filters should not be taken apart. For stubborn grease, simply soak the
filters in warm water prior to putting them in the dishwasher.
MAINTENANCE
Exterior
Stainless Steel:
The exterior of the machine can be maintained by wiping the surface area with
a gentle cloth and a mild soap (dawn soap works great). Follow this step with
a stainless-steel cleanser and a gentle cloth adequate for stainless steel
finishes. For stubborn grease/oil build up a chemical solvent such as paint
thinner, varsol or acetone can be applied on a rag and used to wipe stainless
steel surfaces ONLY. DO NOT USE ON PAINTED SURFACES DO NOT LET THE CHEMICAL
SOLVENT
COME IN CONTACT WITH ANY PLASTIC COMPONENTS
REPLACEABLE PARTS
NAME | DESCRIPTION | IMAGE |
---|
WM01
|
Grease Cup
|
BFX15
|
Baffle Filters for 28”
|
BFX16
|
Baffle Filters for 34”
|
UM33
|
LED Light bulb
|
FREQUENTLY ASKED QUESTIONS
When do I need a Cyclone Range Hood?
Peoples’ cooking habits vary, but getting rid of airborne contaminants and
odours which linger in your cooking area is important for everyone. Whether it
is steam from cooking soups, steaming vegetables or grease and oil from frying
food, it is important for everyone to have efficient ventilation in their
kitchen.
Can I install a Cyclone Range Hood myself?
Installing a Cyclone Range Hood is fairly straightforward, and we provide
detailed installation instructions. We do not recommend range hood
installation for novices to electrical or handy work.
What is the minimum mounting height between the range top to hood bottom?
The minimum mounting height between the cooking surface to the bottom of the
range hood should be no less than 30” above a gas range and 28” above an
electric range or ceramic cooktop. The maximum height should be no more than
36” above a gas range and 34” above an electric or ceramic cooktop. The hood
must be installed at the correct mounting height. Hoods mounted too low can
result in heat damage and hoods mounted too high will have impaired
performance.
How often do I clean my Cyclone Range Hood?
Cyclone recommends that our range hoods are cleaned at least once every month.
However, cooking habits differ and cleaning should reflect the frequency and
intensity of cooking.
What is the difference between a mesh and a baffle filter?
Most Cyclone Range Hood wall mount models have mesh filters as the standard
which can be exchanged for Baffle Filters. Baffle filters are a durable and
stainless-steel alternative to aluminum mesh filters, capture more grease and
provide a pleasant aesthetic.
Can I get a longer chimney flue to reach my high ceilings?
Cyclone Canopy range hoods can accommodate almost any ceiling height. Extended
chimney pieces can be purchased with certain retailers, consult with the
retailer that you are shopping with to confirm if they can accommodate your
requirements. Otherwise, the correct chimney portions can be purchased
separately directly from Cyclone Range Hoods. Cyclone does not exchange the
chimney size once the order has been received. For more information about this
please feel free to contact Cyclone Range Hood Inc. customer service team
before you buy your new range hood.
Cyclone Range Hoods Inc.
1361 Huntingwood Drive, Unit 16, Scarborough, ON M1S 3J1 T
el: 1-866-293-5662 or
416-293-0933
Fax 416-293-4793
Email: Info@CycloneRangeHoods.com
Website: www.CycloneRangeHoods.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>