NIGHT OWL SG-FWIP2-CM Indoor Camera User Guide

NIGHT OWL SG-FWIP2-CM Indoor Camera

Product Information

The product is an indoor camera designed for surveillance purposes. It comes with a mounting stand, USB cable, power adapter, and mounting hardware. The camera has a built-in microphone and speaker for audio capabilities. It can be connected to the Night Owl app or a compatible recorder for viewing and recording.

Status LED Guide:

Product Usage Instructions

Add your Camera:
To begin viewing your camera, follow one of the methods below:

1. Add it to the Night Owl app:
   • Download the Night Owl app from your app store.
   • Create an account if you are a first-time user, or log in if you already have an account.
   • Follow the in-app instructions to add your camera.
2. Add it to a compatible recorder:
   • Refer to the detailed setup steps in the user manual by scanning the QR codes provided.

Remove Protective Film:
Before using the camera, quickly remove the clear protective film from the camera lens.

Install the Camera:
Your camera can be set up in three different ways:

1. Use the stand and place the camera on a flat surface.
2. Remove the stand and place the camera cube on a flat surface.
3. Mount the camera using the camera stand and mounting hardware. You will need a screwdriver or drill (not included) for this option.

Need Help?
If you require assistance or have any questions, you can visit our support site for self-help material. On the support page, you can use the Live Chat feature or contact our Live Phone support.

1. Please visit Support.NightOwlSP.com
2. Enter “FWIP2” into the Search bar

What’s Included

• Indoor Camera with Mount
• USB Cable
• Power Adapter
• Mounting Hardware

Camera Details

Download the Night Owl App

If you are a first-time user, go ahead and download the Night Owl app. Quickly create an account and log in. Already have an account? Simply log in.

Plug It In

Use the provided USB cable and power adapter to plug your camera into an outlet.

NOTE : For initial setup/pairing, have your camera within 1 to 3 feet of your router or recorder.

Add your Camera
To begin viewing your camera, add it to the Night Owl app or a compatible recorder. For more detailed setup steps, scan the QR codes below.

• Standalone
  (Add to the App)

• Ecosystem
  (Add to a Recorder)

Status LED Guide

LED Status AND Camera Status

Remove Protective Film
Quickly remove the clear protective film from the camera lens.

Install the Camera

Your camera can be set up 3 different ways:

1. Use the stand and place the camera on a flat surface.
2. Remove the stand and place the camera cube on a flat surface.
3. Mount the camera using the camera stand and mounting hardware.

Need Help?

We are here for you
Our support site is filled with self-help material. From your support page, you can use the Live Chat feature or contact our Live Phone support.

1. Please visit Support.NightOwlSP.com
2. Enter FWIP2 into the Search bar

FCC RADIATION NORM

FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Compliance Statement
These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used by the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION!
The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment should be installed and operated with a minimum distance of 8 inches between the radiator and your body.

QSG-FWIP2-CM 2-091223

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>