TRIO LIGHTING 629219331 LED Ceiling Light Instruction Manual
- June 4, 2024
- TRIO LIGHTING
Table of Contents
LIGHTING 629219331 LED Ceiling Light
Instruction Manual
629219331
629219331 LED Ceiling Light
WARNING!
Before assembling, please read carefully the safety instructions!
This product contains a light source(s) of energy efficiency class(es) E
629219331, 629210331
Description of how the light works without the remote control unit By the wall
switch you can choose the following light modes
A + C + F (2700K), B + D + E (6000K)
A + C + F + B + D + E (4000K)
A + C + F (6000K), B + D + E (2700K)
Night light
You can select it, with a short turn on and turn off of the lamp.
The most recently configured light settings are always displayed (memory
effect)
The status of the light scenario is saved after 15 seconds. In order not to
change the saved status of the luminaire, the interval between restart
processes must not be shorter than 2 seconds.
Description of how the light works with the remote control unit
The most recently configured light settings are always displayed (memory
effect)
The synchronous control of several lights is not foreseen.
Operation of the remote control
1. On
2. Off
3 & 4. Brightness regulator: The adjustment takes place in stages. By
pressing for a short period, it is possible to control the individual stages.
Pressing the button permanently results in the maximum or minimum brightness
being reached.
5 & 6. The adjustment takes place in stages. By pressing for a short period,
it is possible to control the individual stages. Pressing the button
permanently results in the wärmest or coldest color setting being reached.
7. Mode: Cyclical modes switch
A + C + F (2700K), B + D + E (6000K)
A + C + F + B + D + E (4000K)
A + C + F (6000K), B + D + E (2700K) Night light
8. Night light
Set up the remote control
Please disconnect the light from the mains for 10 seconds. Then switch the
light on using the wall switch and at the same time press the “ON” button on
the remote control. After about four seconds, the light confirms the
successful programming by flashing several times. Now the light can be
controlled with the remote control. The disengaging of the remote control
works in the same way, except that the “OFF” button must be pressed instead of
the “ON” button.
Declaration of Conformity
Hereby, Trio Leuchten GmbH. Gut Nierhof 17, D-59757 Arnsberg, declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.trio-leuchten.de
TRIO Leuchten GmbH
TRIO International GmbH
Gut Nierhof 17
D-59757 Arnsberg
www.trio-lighting.com
WEEE-Reg. Nr.: DE78273666
TRIO Lighting Ibérica s.l.: RAEE 4544
TRIO Lighting Italia s.r.l.: RAEE IT13020000007829
TRIO Lighting Scandinavia Oy: WEEE PIR2005Y354114/2114
Developed in Germany by
Made in PRC ****
References
- Leuchten für dein Zuhause
- trio-lighting.com/
- TRIO – LIGHTING FOR YOU
- trio-lighting.com
- trio-lighting.com/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>