F212BRKR RKR Rails Instructions
- June 13, 2024
- RKR
Table of Contents
F212BRKR RKR Rails
Product Information
- Product Name: RKR Rails
- Part Number: F212BRKR
- Application: 21-22 Ford Bronco 2DR
Parts Included:
- Driver Side Rail (Part Number: F212RKRCC)
- Passenger Side Rail (Part Number: F212RKRCC)
- Detachable Steps (Pair) (Part Number: F212RKRCCS2)
Hardware Included:
- HARDWARE DESCRIPTION: FHLB M10x25mm HEX FLANGED BOLT (Qty: 1)
- HARDWARE DESCRIPTION: 04240X BOLT (Qty: 8)
Product Usage Instructions
- Identify the driver-side step.
- Remove any factory running boards or hardware and discard them.
- Clean/tap the three factory-threaded mounting locations.
- Carefully place the driver-side rail into place and loosely fasten using the supplied M10X25mm hardware.
- Tighten the three lower bolts first, followed by the three upper bolts.
- Repeat steps 2-5 with the passenger side rail.
- Your installation is now complete.
Detachable Step Installation:
- Attach the step to the mounts located in between the RKR rails using the supplied 1/2 x 1 flanged hex bolts and 1/2 flanged hex nuts. Note that the step will mount to the left of the bracket opposite of the weld.
- Torque the bolts to a target of 40 ft/lbs. / 54nm.
Contact Information:
Phone: 281-880-6322
Fax: 281-880-6325
PARTS INCLUDED
PARTS INCLUDED | QTY |
---|---|
PRT# F212RKRCC | |
DRIVER SIDE RAIL | 1 |
PASSENGER SIDE RAIL | 1 |
PRT# F212RKRCCS2 | |
DRIVER SIDE RAIL | 1 |
PASSENGER SIDE RAIL | 1 |
DETACHABLE STEPS (PAIR) | 1 |
HARDWARE DESCRIPTION
HARDWARE DESCRIPTION | QTY. |
---|---|
HWKT-12094X |
FHLB
04240X
| M10x25mm HEX FLANGED
BOLT
| 8
DO NOT USE IMPACT TOOLS
INSTALLATION
- STEP 1: Identify driver side step.
- STEP 2: Remove any factory running boards or hardware and discard.
- STEP 3: Clean/tap the three factory threaded mounting locations.
- STEP 4: Carefully place step into place and loosely fasten using the supplied M10X25mm hardware.
- Step 5: Next, tighten the three lower bolts first, following with the three upper bolts.
- Step 6: Repeat steps 2-5 with passenger side.
- Step7: Your install is now complete.
Detachable Step Installation
- Step 1: Attach the step to the mounts located in between the RKR rails using the supplied 1/2” x 1” flanged hex bolts and 1/2”” flanged hex nuts. NOTE: The step will mount to the left of the bracket opposite of the weld.
- Step 2: Torque bolts to a target of 40 ft/lbs. / 54nm
12302 Shiloh Church Rd. Houston TX 77066 Phone 281-880-6322 – Fax 281-880-6325
I-SHEET NUMBER : INST-00321
PART NUMBER: F212BRKR, F212BRKRS2
PRODUCT : RKR RAILS
APPLICATION: 21-22 FORD BRONCO 2DR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>