HAVIT H2590BT Multifunction Wireless Headphone User Manual

HAVIT H2590BT Multifunction Wireless Headphone User Manual

Packing list

Production structure

1. Micro SD card slot
2. Volume-/PREVIOUS
3. Play/Pause
4. Volume+/NEXT
5. LED indicator
6. Micro USB charging port
7. AUX in
8. Microphone
9. Multi-function button MFB

Power on Long
press the MFB for 3 seconds.

Bluetooth connection

Follow the steps Please confirm that your phone is built-in Bluetooth function

1. Long press the MFB to turn on the headphone, then the headphone will automatically enter pairing with LED flashing alternately red and blue.
2. Activate the Bluetooth function and search for “HAVIT H2590BT” referring to your phone instructions.
3. Manually click “HAVIT H2590BT” to connect. If the indicator turns blue and the connection is successful.
4. Pairing mode can last 10 minutes. If you miss the pairing time, you need to restart the device and operate follow the procedural steps mentioned above.
5. When turning on, the headphone can automatically connect the last device that you had paired. (Make sure the Bluetooth function of the last paired device has been on when the headphone is entering the pairing status.)
6. Charge if the LED indicator lights up red and LED indicator goes off upon charging finished.

Power off
Long press the MFB for 3 seconds

Answer incoming calls
Short press the MFB to answer incoming calls.
Tip: Since some mobile phones default to answer calls via their own receiver, please refer to the instructions of your phone and set on your phone.

End the call
Press the MFB once to end the current call.

Refuse incoming calls
Press the MFB for 2 seconds when there comes a call.

Last number redials
Dual press the MFB to redial the last calling number.

Music playing:

1. Play/Pause: Short press the Play/Pause button;
2. NEXT: Long press to select the next song;
3. PREV: Long press to select the previous song;
4. VOL: Short press to increase volume;
5. VOL: Short press to decrease volume.

Mode switching Long press play/pause button to select mode between Bluetooth//FM/Micro SD cards /AUX in.

FM mode

1. Long press the Play/Pause button for 2 seconds to select FM mode, then press the Play/Pause button to scan and memorize the FM radio stations.
2. Long press and to select the desired channels. Short press the or button to adjust the volume.

Micro SD mode
Insert a micro SD card, the headphone will automatically recognize (with a voice prompt) and automatically broadcasts MP3 format music in it.

Wired music mode

1. Plug and play: Connecting the headphone to a music player with the provided dual 3.5mm audio cable, the headphone can be used as wired headphone without starting.
2. Actually, buttons are invalid in this mode.

Information of charging and battery:

Charging:

1. As product is built-in non-removable and rechargeable battery, PLS use the provided micro USB cable to charge.
2. Charging voltage and current is 5V/200mA. Please charge the product with the input power below 5V/1A.
3. Fully charge the product before the first use. It takes about 3 hours to charge for the subsequent use.
4. Please choose the charger which is certified by the regular manufacturer.
5. Repeated charging and discharging of the headphone will lead to a decline in battery performance over time, which is normal for all rechargeable batteries.
6. Charge if the LED indicator lights up red and LED indicator goes off upon charging finished.

Specification:

Bluetooth Version: V5.0
Product size: 15019568mm
Net weight: 150g
Wireless working range: 10M (without obstacles)
Speaker: Φ40mm
Speaker sensitivity: 110±3dB at 1KHz;1mW
Profiles supported: HFP/HSP/A2DP/AVRCP
Impedance: 32Ω±15%
Speaker frequency: 20Hz-20KHz
Input voltage / current: DC 5V /200mA
Battery: 200mAh
Play time: 3-4H
Talk time: 3-4H
Voice chat: Supported
Material: ABS

Warnings:

1. Please follow the instruction to operate
2. Please charge the headphone with input power below 5V/1A, in order to protect the battery;
3. Please store or use the headphone in a normal temperature environment.
4. Please keep the headphone from heat source, such as radiators, hot air regulators, stoves, or other heat generating instruments. As it is not anti-high temperature.
5. Don’t jam the ports of the headphone, such as charger port, LED port and microphone etc.
6. In order to protect your hearing and extend the speaker service life, it is not recommended to adjust the volume to the maximum level for a long time.
7. Whatever reasons damage the headphone, please feel free to contact our after-sales staff in time rather than repair by yourself. Otherwise, you will accept without after-sales service.

https://www.havit.hk/?utm_source=social&utm_campaign=EWM

www.havit.hk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>