ASOMETECH 868D 260W 5 Ports PD+QC3.0 Charger User Manual

ASOMETECH 868D 260W 5 Ports PD+QC3.0 Charger User Manual

Model: 868D,818H,UGB-260W,UGB-160W

Thank you for choosing USB-C PD+QC3.0 Charger.
Please read carefully our User Manual before using it, if you have any problem when using, please contact our customer service, we’ll solve it as soon as possible.

And any suggestion warm welcomed.

1. Product Overview

1. Introduction
   1.260W 5 port GaN Power Charger

2. USB-C1 Output: 3.3V-21V/5A or 5V/3A or 9V/3A or 12V/3A or 15V/3A or 20V/5A or 28V/5A(140W Max)

3. USB-C2 Output: 3.3V-21 V/5A or 5V/3A or 9V/3A or 12V/3A or 15V/3A or 20V/5A(100W Max)

4. USB-C3 Output: 3.3V-21V/5A or 5V/3A or 9V/3A or 12V/3A or 15V/3A or 20V/5A(100W Max)

5. USB-A1 Output: 4.5V/5A or 5V/4.5A or 5V/3A or 9V/2A or 12V/1.5A(22.5W Max)

6. USB-A2 Output: 4.5V/5A or 5V/4.5A or 5V/3A or 9V/2A or 12V/1.5A(22.5W Max)
   USB-C2+USB-C3 Output: 45W+45W
   USB-A1 +USB-A2 Output:
   Total Output: 260W Max
   Wireless Output: 15W, IOW, 7.5W, 5W

7. Full speed charging 5 devices at the same time

8. Efficient synchronous rectification scheme, Up to 87% of the conversion rate.

9. elegant, durable, heat eliminable.

10. 0ver-load, Over-voltage, over-current and short circuit protection.

11. Compact and unique appearance design by our own, without any gap.

12. Guaranteed Safety: Premium materials and built-in fail-safes keep you and your device protected against shorts.

Accessories

• 260W 5 port GaN Power Charger 1EA
• AC Cable (1M) 1EA
• Color box 1EA
• User Manual 1EA

2. Appearance Description

2-1 Technical Parameters

• Input Voltage: 100-240V~ 50/60Hz
• USB-C1 Output: 3.3V-21V/5A or 5V/3A or 9V/3A or 12V/3A or 15V/3A or 20V/5A or 28V/5A(140W Max)
• USB-C2 Output: 3.3V-21V/5A or 5V/3A or 9V/3A or 12V/3A or 15V/3A or 20V/5A(100W Max)
• USB-C3 Output: 3.3V-21V/5A or 5V/3A or 9V/3A or 12V/3A or 15V/3A or 20V/5A(100W Max)
• USB-A1 Output: 4.5V/5A or 5V/4.5A or 5V/3A or 9V/2A or 12V/1.5A(22.5W Max)
• USB-C2+USB-C3 Output: 45W+45W
• USB-A1+USB-A2 Output: 12W+12W
• Total Output: 260W Max
• Wireless Output: 15W, 10W, 7.5W, 5W

Protection

• Output Short Circuit Protect: on short circuit protection situation, our item will stop charging to protect devices
• Over Voltage Protection: protection system will be started

Material
Plastic Housing: PC+Fireproof material 2-4 Appearance and Interface

1. USB-C1 Output: 3.3V-21V/5A or 5V/3A or 9V/3A or 12V/3A or 15V/3A or 20V/5A or 28V/5A(140W Max)
2. USB-C2/C3 Output: 3.3V-21V/5A or 5V/3A or 9V/3A or 12V/3A or 15V/3A or 20V/5A(100W Max)
3. USB-A Output: 4.5V/5A or 5V/4.5A or 5V/3A or 9V/2A or 12V/1.5A(22.5W Max)
4. wireless Output: 15W, 10W, 7.5W, 5W
5. Connect to alternating current, could charge AC cable connector based on different market.

3. Operation Instruction

As above picture showed, connect to alternating current AC 100-240V , then 260W 5 ports GaN Power Charger will work.

**** Our item is suitable to use in AC 100-240V constant alternating current, if higher or lower voltage is unsuitable

FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party  responsible for compliance could void your authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The distance between user and products should be no less than 20cm

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>