DYNAMAX DYBT-011M Bluetooth Dongle User Manual
- June 13, 2024
- Dynamax
Table of Contents
User’s Manual
Product name: BLUETOOTH DONGLE
Product model: DYBT-011M
How to use it:
- Easy Plug into USB slot of device. No need other operation
Features:
- Easy Plug in to use. No need other operation
- Bluetooth version: 5.0
- ISM Band: 2.4GHz(2.402-2.480GHz)
- Operation range: Class II. Up to 20M(No obstacles)
- Compatible with Linux/Windows XP/Vista/Windows7/8.1/10
- Full-speed USB 2.0 interface
Technical Parameters
| Commodity name: | BLUETOOTH DONGLE |
|---|---|
| Product model: | DYBT-011M |
| Product chip: | Realtek 8761BUV, Taiwan |
| Bluetooth version: | Bluetooth V5.0 |
| Frequency range: | 2.4GHz(2.402-2480MHz) |
| Use distance: | 10M—20M |
| Rated voltage: | DC5V |
| Interface type: | USB |
| Transmission rate: | 3.0Mbps (Nova 5 Pro Actual measurement 220KB/s) |
| Operating system: | Win7/Win 8.1/Win 10/Linux |
| Operating temperature: | -30℃ ~ 45℃ |
Caution:
- Please keep away from dusty and moisture environment
- This is not waterproof product, do not use it in the rain
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been tested and in compliance with SAR limits, users can obtain
FCC/ISED information on RF exposure and compliance. This equipment should be
installed and operated with minimum distance 5mm between the radiator & your
body.
This device complies with Innovation, Science, and Economic Development Canad
licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.