Goal Zero Boulder 100i Solar Panel User Guide

Goal Zero Boulder 100i Solar Panel

Product Information

The Boulder 100i Solar Panel is a high-quality solar panel manufactured by Goal Zero. It is designed to collect and use solar power to charge various devices. The panel comes with Z-Brackets for easy installation and has a rated power output of 100 watts. It is durable, weather-resistant, and suitable for both outdoor and indoor use.

Technical Specifications:

• Solar Panel Rated Power: 100 watts
• Cell Efficiency: High-efficiency cells for maximum power output
• Operating Voltage (peak power): Varies based on sunlight intensity
• Operating Current (peak power): Varies based on sunlight intensity
• Open Circuit Voltage (VOC): Varies based on sunlight intensity
• Short Circuit Current (ISC): Varies based on sunlight intensity
• Series Fuse Rating: Check the product documentation or Goal Zero website for recommended fuse rating
• Temperature Coefficient (power): Varies based on temperature
• Temperature Coefficient (Voltage): Varies based on temperature
• Temperature Coefficient (current): Varies based on temperature
• Operating Temperature: -20°C to 85°C (-4°F to 185°F)
• Connection Connector: 4mm Solar Connectors
• Cable Length: Check the product documentation or Goal Zero website for cable length
• Cable AWG: Check the product documentation or Goal Zero website for cable AWG
• General Weight: Check the product documentation or Goal Zero website for weight
• Dimensions: Check the product documentation or Goal Zero website for dimensions

Product Usage Instructions

Get to Know Your Gear:
The Boulder 100i Solar Panel comes with Z-Brackets, M6 Hex Bolts, Hexagon Nuts, Split Lock Washers, and Flat Washers.

How It Works:
Plug the 4mm Solar Connectors on the back of your Boulder 100i into a 4mm Solar Connector, combiner, or adapter to plug into your desired device to collect and use solar power.
To plug the Boulder 100i into a Yeti, you will need a 4mm Solar Connector to HPP adapter.

How to Install Your Panel:

1. Secure the Z Brackets to the Solar Panel:
2. Attach the Z-Bracket along the long side of the solar panel frame near the corner. Be sure the mounting foot of the bracket is facing away from the solar panel frame.
3. Line up the mounting hole on the Z-Bracket with the hole on the solar panel frame.
4. Attach the Z-Bracket to the solar panel frame with the M6 hex bolt, split lock washer, flat washer, and hexagon nuts.
5. Repeat for the other 3 brackets, placing one near each corner of the solar panel.
6. Mount the Panel:
7. Choose a location to install your solar panel. We recommend picking a spot that is clear and will receive maximum sun exposure.
8. Mount the panel as far away from rooftop obstructions as possible.

Connecting Multiple Panels:

When connecting multiple panels, be mindful of the voltage input limitations of the device you are charging. The amount of input is impacted by whether you are connecting panels in a series or parallel configuration. Visit the Goal Zero website for more information about optimum solar panel setup.
For further assistance with your device, contact Goal Zero customer support at 1-888-794-6250 or visit their website at www.goalzero.com/contact.

DISCLAIMER

Please read all warnings, instructions and cautions carefully before use to avoid personal injury, property damage or damage to your Goal Zero product. Goal Zero reserves the right to update this document without prior notice. Please visit www.goalzero.com to find the latest product information and the most recent version of the User Guide.
For assistance with your device in the United States, visit our contact page at www.goalzero.com/contact or call 1-888-794-6250. For assistance with your device outside of the United States, contact the local distributor. If you do not have contact information for the local distributor, contact us in the United States and we will help connect you to the local representative

Get to Know Your Gear

*MC4® is a registered trademark of Staubli Electrical Connectors

In the Box

• Boulder 100i solar panel
• (4) Z-bracket
• (4) M6 Hex Bolt
• (4) M6 Hexagon Nut
• (4) M6 Split Lock Washer
• (4) M6 Flat Washer

How It Works

Plug the 4mm Solar Connectors on the back of your Boulder 100i into a 4mm Solar Connector, combiner, or adapter to plug into your desired device to collect and use solar power.
To plug the Boulder 100i into a Yeti, you will need an 4mm Solar Connector to HPP adapter.

How to Install Your Panel

1. Secure the Z Brackets to the Solar Panel
2. Attach the Z-Bracket along the long side of the solar panel frame near the corner. Be sure the mounting foot of the bracket is facing away from the solar panel frame.
3. Line up the mounting hole on the Z-Bracket with the hole on the solar panel frame.
4. Attach the Z-Bracket to the solar panel frame with the M6 hex bolt, split lock washer, flat washer, and hexagon nuts.
5. Repeat for the other 3 brackets, placing one near each corner of the solar panel.
6. Mount the Panel
7. Choose a location to install your solar panel. We recommend picking a spot that is clear and will receive maximum sun exposure.
8. Mount the panel as far away from rooftop obstructions as possible

Connecting Multiple Panels

When connecting multiple panels, it is important to be mindful of the voltage input limitations of the device you are charging. The amount of input is impacted by whether you are connecting panels in a series or parallel configuration. Visit the Goal Zero website for more information about optimum solar panel setup

Technical Specifications

Solar Panel

• Rated Power 100W
• Cell Efficiency 22%
• Operating Voltage (peak power) 17.1V
• Operating Current (peak power) 5.84A
• Open Circuit Voltage VOC 20.52V
• Short Circuit Current ISC 6.14A
• Series Fuse Rating 9A
• Temperature Coefficient (power) -.39%/°C
• Temperature Coefficient(Voltage) -.3%/°C
• Temperature Coefficient(current) .06%/°C
• Operating Temperature -40° to 185°F
• Connection
• Connector MC4®*
• Cable Length 36in
• Cable AWG 12 AWG

General

• Weight 13.2lbs/6kg
• Dimensions 23.07 x 38.58 x 1.18in 58.6 x 98 x 3cm
• Certs
• Warranty 2 years
• Ingress Protection IP67

*For warranty terms, conditions, and registration, go to www.goalzero.com/warranty
Based on Standard Test Conditions with Solar irradiance at 1000W/m^2, cell temperature of 25C and air Mass AM = 1.5

Frequently Asked Questions

• Q: Can I plug the Boulder 100i directly into a Goal Zero Yeti?
  A: No. You need an MC4®* to HPP adapter to connect the Boulder 100i to a Yeti. These panels are intended for RV installations with the Goal Zero Escape Ecosystem.

• Q: How many solar panels can I connect together?
  A: It varies depending on the device you’re pairing your panels with. For example, the Goal Zero Yeti PRO 4000 will accept a maximum of 5 Boulder 100i panels in series, while the Yeti 1500X and all other ‘X’ line products can only accommodate 2 panels in series.

• Q: Can I chain my Boulder 100i with third-party solar panels?
  A: No. The Boulder 100i is not guaranteed to work with any other manufacturers’ products. Many solar panels are manufactured differently. Pairing your Boulder 100i with third-party panels may result in product damage, fires, or other serious issues.

GOAL ZERO HEADQUARTERS
Draper, UT 84020
1-888-794-6250
Designed in the U.S.A.
Made in Vietnam
Goal Zero Yeti is a trademark of Goal Zero
GOALZERO.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>