LG Electronics GVMRB Generic Video Module User Manual
- June 13, 2024
- LG Electronics
Table of Contents
LG Electronics GVMRB Generic Video Module
Overview and Specifications
Overview
- The GVM (Generic Video Module) operates as a controller to two or more touch-enabled displays in the rear seat, and/or in the front passenger seat for infotainment purposes.
- Utilizing internal Android Operating system it allows users to stream media content from embedded apps, view vehicle information, and interact with HDMI ports in the front/rear consumer port inputs.
- The GVM will drive touch display for entertainment, and supports audio streaming function for BT devices.
(device : BT headphone, BT earphone, BT speaker)
Specifications
*Product
Item | Categories | Specifications |
---|---|---|
Specification | Product Name | GVM (Generic Video Module) |
Model | GVMRB | |
Dimensions | Refer to image | |
Weight | 1.0kg | |
Power Source | DC 12V | |
Operational Temperature range | -40 ℃ ~ 85 ℃ |
Dimensions
< Basic Design Concept >
Dimensions : 230.82mm x 122mm x 40.8mm
*RF specifications
[ Bluetooth ]
Item | Specifications | Unit |
---|---|---|
Frequency | 2400 ~ 2483.5 | MHz |
Modulation Type | GFSK, π/4 DQPSK, 8 DPSK | |
BT Power | -2 (MIN.) / 1 (TYP.) / 4 (MAX.) | dBm |
Data rate | 1 ~ 3 | Mbps |
Channel spacing | 1 | MHz |
BT version | BT5.0 | MHz |
Max output power: 4dBm (Maximum average power including tolerance)
Tolerance: +/- 3dBm
Component
Operation
Item | Descriptions |
---|---|
Display & Touch | Display for viewing information and Touch screen for user |
operation
< Home Screen > ![Home Screen](https://manuals.plus/wp-content/uploads/2023/10/LG-Electronics- GVMRB-Generic-Video-Module-User-Manual-5.png)< Touch Gesture >
Symbol | Gesture | Description |
---|---|---|
Tap (Press) | You touch a part of the screen with your finger and then take |
the finger off from the screen
| Double tap| A Double Touch gesture consists two Touches in quick succession.
| Long tap / Long press (Press & Hold)| A Long Press is performed by touching
the screen and holding that touch location for some period of time.
| Flick (Flicking)| You move from one point to the other point quickly and
then take the finger off from the screen (Factor: direction)
| Drag & Drop| You touch a part of the screen for 1 second or more while you
move and then take the finger off from the screen
| Pinch & Spread (only in the browser)| Zoom out/in. Users place the two
fingers a little distance apart on the screen and move them toward/spread each
other without lifting them from the screen.
Precautions
- Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving and always be fully aware of all driving conditions. Do not change settings or any functions. Pull over in a safe and legal manner before attempting such operations. To promote safety, certain functions are disabled unless the parking brake is on.
- To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
- To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture.
- When driving your vehicle, be sure to keep the volume of the unit low enough to allow you to hear sounds coming from the outside.
- Do not drop it and avoid heavy impacts at anytime.
- The driver should not watch the monitor while driving. If the driver watches the monitor while driving, it may lead to carelessness and cause an accident.
FCC/ISED Statements
Federal Communications Commission(FCC) Statement (FCC Part 15.21) You are
cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the
equipment.
FCC Part 15.105
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.19 Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference
that may cause undesired operation of the device.
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be colocated or operating
in conjunction with any other antenna or transmitter.
End users must follow the specific operating instructions for satisfying RF
exposure compliance.
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. End users must follow
the specific operating instructions for satisfying RF exposure compliance.
Responsible Party Information(Supplier’sDeclaration of Conformity)
LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs New Jersey, United
States, 07632 Contact Number of Information
Industry Canada Statement
[English] Industry Canada Statement
(For Canada)
This device complies with Industry Canada’s licence-exempt RSS Stadard(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
(For Canada)
This equipment complies with IC radiation exposure limits set forth for an
Uncontrolled environment.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>