Jabra Speak 710 Portable Wireless Speakerphone User Manual

: June 13, 2024
: Jabra

Table of Contents

Jabra Speak 710 Portable Wireless Speakerphone
Jabra Speak 710 Product Information
Product Usage Instructions
Jabra Speak 710 features
Overview
**Where to position
How to charge
**How to connect
How to use
**Software
**Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Jabra Speak 710 Portable Wireless Speakerphone

Jabra Speak 710 Product Information

The Jabra Speak 710 is a speakerphone designed and engineered in Denmark. It is made in China and has the model number PHS040W / END040W. The product is compliant with the Declaration of Conformity, which can be found on the website www.jabra.com/CP/US/declarations-of- conformity.

Product Usage Instructions

Where to position:
Small meeting room
Position the speakerphone in the center of the table, up to 2m/6ft from each participant. A single Jabra Speak 710 is ideal for up to 6 people.

Large meeting room
For large meetings of up to 12 people in a single room, position two Jabra Speak 710s at either end of the table to ensure all participants in the meeting can be heard clearly. To temporarily link the audio between two Jabra Speak 710’s, press the Link button on both speakerphones when they are within 2m/6ft.

Desk
When using the Jabra Speak 710 at your desk, it is recommended to put the speakerphone into an upright position using the table stand. This will better direct the audio towards you.

Stereo Media
If you are presenting or viewing stereo multimedia, two Jabra Speak 710s can be positioned on either side of a projector or display for automatic stereo sound. To temporarily link the audio between two Jabra Speak 710’s, press the Link button on both speakerphones when they are within 2m/6ft.

How to charge
USB charging
Plug the Jabra Speak 710 into a USB power source using the attached USB cable. The Jabra Speak 710 battery lasts for up to 15 hours of talk time and takes approximately 3 hours to fully charge.

Automatic power off
To preserve the battery while unplugged, the Jabra Speak 710 will automatically power off when it has not been connected to a Bluetooth device for 15 minutes. If connected to a Bluetooth device and unplugged, it will automatically power off after

© 2017 GN Audio A /S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.
Designed and engineered in Denmark Made in China
MODEL: PHS040W / END040W

Welcome
Thank you for using the Jabra Speak 710. We hope you will enjoy it!

Jabra Speak 710 features

Immersive sound for calls and music
Intuitive plug-and-play connectivity – connect to laptop, smartphone, and tablet via USB or Bluetooth®
Lightweight design, protective travel pouch, and 15 hours of battery life
Flexible and scalable for small and large meetings
Interact with your voice assistant with the one-touch Smart button
Certified for Avaya, Cisco, and Skype for Business for a plug-and-play experience

Overview

**Where to position

**

Small meeting room
Position the speakerphone in the center of the table, up to 2m/6ft from each participant. A single Jabra Speak 710 is ideal for up to 6 people.

Large meeting room
For large meetings of up to 12 people in a single room, position two Jabra Speak 710’s at either end of the table to ensure all participants in the meeting be heard clearly.

To temporarily link the audio between two Jabra Speak 710’s, press the Link button on both speakerphones when they are within 2m/6ft.

Desk
When using the Jabra Speak 710 at your desk it is recommended to put the speakerphone into an upright position using the table stand. This will better direct the audio towards you.

Stereo media
If you are presenting or viewing stereo multimedia, two Jabra Speak 710’s can be positioned on either side of a projector or display for automatic stereo sound.

To temporarily link the audio between two Jabra Speak 710’s, press the Link button on both speakerphones when they are within 2m/6ft.

How to charge

USB charging
Plug the Jabra Speak 710 into a USB power source using the attached USB cable. The Jabra Speak 710 battery lasts for up to 15 hours of talk time and takes approx. 3 hours to fully charge.

Automatic power off

To preserve battery while unplugged, the Jabra Speak 710 will automatically power off when it has not been connected to a bluetooth device for 15 minutes.
If connected to a bluetooth device and unplugged, it will automatically power off after 8 hours.

Battery status
To view the current battery status, press the Battery status button. The LEDs around the edge of the Jabra Speak 710 will light up to indicate the current battery status.

**How to connect

**

Connect to PC (Bluetooth)

Plug the Jabra Link 370 into a USB port on your PC. The Jabra Speak 710 and the Jabra Link 370 are pre-paired and ready to use out of the box. The bluetooth range is 30m.
For the Jabra Speak 710 to work correctly you may need to set the Jabra Link 370 as the playback device in your operating system’s audio settings.
To manually pair the Jabra Speak 710 with the Jabra Link 370, please use Jabra Direct.

Connect to PC (USB cable)

Plug the Jabra Speak 710 into a USB port on your PC. You may need to set the Jabra Speak 710 as the playback device in your operating system’s audio settings.

Connect to smartphone

Hold the Bluetooth button for 2 seconds and follow the voice-guided instructions to pair to your smartphone. The bluetooth range is 10m.
To disconnect or reconnect, press the Bluetooth button again.

How to use

Button visibility

The buttons are backlit and only visible when the speakerphone is powered on. After 1 minute of inactivity the buttons will fade, and can be reactivated by tapping the area where the buttons are located.
The Smart button, Link button, and Mute button will only be visible under certain conditions (e.g. the Link button is only visible when the Jabra Speak 710 is in close promixity to another Jabra Speak 710).

Typical use

Multiple call handling

Link button
To temporarily link the audio between two Jabra Speak 710’s, press the Link button on both speakerphones when they are within 2m/6ft. The Link button will only be visible when two Jabra Speak 710’s are within 2m/6ft.

To unlink the speakerphones, press the Link button on one of the speakerphones.
NOTE If two bluetooth devices are connected to the Jabra Speak 710, the last connected Bluetooth device will be replaced by the temporary link.

Smart button
By default, the Smart button will activate your smartphone’s voice assistant (Siri®, Google Now™, Cortana™). However, if you would prefer the Smart button to instead speed dial a phone number on your Smartphone or PC, this can be configured using Jabra Direct.

Voice guidance
The voice guidance can be turned on or off by holding the End call button for 8 seconds.

Shared use

If the Jabra Speak 710 is to be shared by many users, it is recommended to enable Shared use in Jabra Direct. When Shared use is enabled, the speakerphone will not automatically connect to a previously connected Smartphone or Jabra Link 370.
To connect to a smartphone or Jabra Link 370, press the Bluetooth button on the speakerphone and follow the voice-guided instructions.
NOTE When Shared mode is enabled, you will need to re-pair to your smartphone or Jabra Link 370.

Factory reset

Resetting the Jabra Speak 710 clears the list of paired Bluetooth devices and also clears all personalized settings. After a factory reset, it is necessary to re-pair the Jabra Speak 710 to your Bluetooth devices or Jabra Link 370.
To factory reset, hold the Answer call button and the End call button for 8 seconds until ‘Factory reset’ is announced by the speakerphone.

**Software

**

Jabra Direct

Jabra Direct is PC software designed to support, manage and enable optimal functionality for Jabra devices. Download the latest version from jabra.com/direct

Update firmware
Firmware updates improve performance or add new functionality to Jabra devices.