HONOR REA-NX9 Hand Smart Phone User Guide

June 13, 2024
Honor

HONOR REA-NX9 Hand SmartPhone

Product Information

The REA-NX9 is a mobile device that features a USB Type-C port, a headset jack, an in-screen fingerprint sensor, and a card slot. It supports dual SIM cards and has a power button and volume button for easy operation. The device has a SAR value of 1.01 W/kg when carried correctly and 0.57 W/kg when the minimum distance of 15 cm is maintained.

Product Usage Instructions

  1. Initial Setup:
    • For a single SIM card : Follow the instructions in the manual to insert and align the SIM card correctly.
    • For dual SIM cards: Use the eject pin provided to insert and align both SIM cards correctly.
    • Refer to the pre-installed Tips app for further details on SIM card management.
  2. Safety Information:
    • Read the safety information carefully before using the device to ensure safe and proper operation.
    • Avoid listening at high volume levels for extended periods to prevent possible hearing damage.
    • Avoid exposing the device to extreme heat, direct sunlight, or heating devices such as microwaves, stoves, or radiators.
    • Maintain a minimum distance of 15 cm between the device and a pacemaker to prevent potential interference.
    • Do not use the device while driving to reduce the risk of accidents.
  3. Disposal and Recycling:
    • Dispose of the device, battery, literature, or packaging at separate waste collection points designated by local authorities at the end of their lifespan.
    • This ensures proper recycling and treatment of electronic waste while conserving valuable materials and protecting human health and the environment.
    • Contact your local authorities, retailer, or household waste disposal service for more information.

Know Your Device

Before using the device, familiarize yourself with its basic operations.

  • To power on your device, press and hold the power button until the screen turns on.

  • To power off your device, press and hold the power button, and then touch it .

  • To restart your device, press and hold the power button, and then touch it .

  • Press and hold the Power and Volume down buttons for more than 10 seconds to force restart your device.

  • Please keep the NFC area close to other devices or objects while using the NFC function.

  • Check out the pre-installed Tips app and master all the great features on your device.

Getting Started

  • Be careful not to scratch your device or hurt yourself when using the eject pin.
  • Store the eject pin out of the reach of children to prevent accidental swallowing or injury.
  • Do not use cut or modified SIM cards with your device as these may not be recognized and could damage the card tray (slot).
  • If your SIM card does not match your device, please contact your carrier.

Follow the instructions in the following figures to set up your device. Please use the eject pin included.
Ensure that the card is correctly aligned and its notch is first inserted into the card tray.

Single-SIM card

Dual-SIM card

SIM Card Management
Select the default mobile data card and calling card as needed. For details, check out the pre-installed Tips app.

  • 5G and 4G service depends on the support of your network carrier and its deployment of relevant services. Please contact your carrier to activate 5G or 4G service.
  • If this guide is inconsistent with the description on the official website, the latter prevails.

For More Information

If you encounter any problems while using your device, you can obtain help from the following resources:

  • Visit https://www.hihonor.com to view device information and other information.

  • Visit https://www.hihonor.com/global/support/ for the most up-to-date contact information for your country or region.

  • Go to Settings and enter the following keywords in the search box to view the corresponding information. E.g. Legal information, Safety information, Authentication info, Regulatory
    information.

  • Depending on the region or model, some devices are required to receive approval from the Innovation, Science and Economic Development Canada (ISED). If your device is approved by the ISED, you can go to Settings and touch System & updates > Regulatory information to view IC ID. If your device does not have an IC ID, the device has not been authorized for sale in Canada or its territories and may only be brought to Canada for the owner’s personal use.

Safety Information

Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly.

Operation and safety

  • To prevent possible hearing damage, do not listen at high volume levels for long periods.
  • Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.
  • Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C.
  • Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
  • Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.
  • Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.
  • While flying in an aircraft or immediately before boarding, only use your device according to the instructions provided. The use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal.
  • In order to avoid damaging the internal circuit of the device or charger, do not use the device in a dusty, damp, or dirty place, or near a magnetic field.
  • When charging the device, make sure the power adapter is plugged into a socket near the device and is easily accessible.
  • Unplug the charger from electrical outlets and the device when not in use.
  • Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
  • Keep the battery away from fire, and do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the battery to leak, overheat, catch fire, or even explode.
  • Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.
  • This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact an authorized service center for a replacement.

Disposal and Recycling Information

The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment.
For more information, please contact your local authorities, retailer, or household waste disposal service or visit the website https://www.hihonor.com/.

RF Exposure Information

  • The World Health Organization has stated that exposure can be reduced by limiting your usage or simply using a hands-free kit to keep the device away from the head and body.
  • Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

For the countries that adopted the SAR limit 1.6 W/kg over 1 gram of tissue.
The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. The highest SAR value reported to the ISED for this device type when using it at the ear is

  • REA-NX9: 1.01 W/kg
    When properly worn on the body is

  • REA-NX9: 0.57 W/kg

Innovation, Science and Economic Development Canada compliance

Body-worn operation
The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

FCC STATEMENTS

ISED Statement

  • This device complies with CAN ICES-003 (B)/ NMB-003(B).
  • This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and
  • Economic Development Canada’s license-exempt

RSS(s). Operation is subject to the following two conditions

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Restrictions in the 5 GHz band:
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Mexico Compliance:( This section is only applicable for Mexico.)
The operation of this device is subjected to the following two conditions:

  1. This device may not cause harmful interferences;
  2. This device must accept any interferences, including those that may cause an undesired operation.

The device IMEI can be obtained by dialing *#06#.This equipment does not support the FM radio function.
The device has the Cellular Broadcasting Service enabled and activated, you can configure the alert messages through the following menu:

Settings > Sounds & vibration > More settings >
Wireless Emergency Alerts.
For information about the IFT certification, visit https://www.hihonor.com/global/legal/certification/

Legal Notice: Trademarks and Permissions

  • Android is a trademark of Google LLC.
  • LTE is a trademark of ETSI.

The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honor Device Co., Ltd. is under license.
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.

Copyright © Honor Device Co., Ltd. 2023. All rights reserved. ALL PICTURES AND ILLUSTRATIONS IN THIS GUIDE, INCLUDING BUT NOT LIMITED TO THE DEVICE COLOR, SIZE, AND DISPLAY CONTENT, ARE FOR YOUR REFERENCE ONLY. THE ACTUAL DEVICE MAY VARY.

NOTHING IN THIS GUIDE CONSTITUTES A WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.

Privacy Policy
To better understand how we protect your personal information, please see the privacy policy at https://www.hihonor.com/privacy-policy/worldwide/

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Honor User Manuals

Related Manuals