RYOBI RBCLLG2 Green Cross Line Laser Instructions

RYOBI RBCLLG2 Green Cross Line Laser

Product Information

The RBCLLG2 is a cross-line laser with grid marks. It is designed with a focus on safety, performance, and dependability.
The product is intended for adults who have read and understood the instructions and warnings in the user manual. It is used to determine and check horizontal and vertical lines.

Cross Line Laser Safety Warnings

• Laser radiation. Do not stare into the beam. Class 2 laser product.
• Risk of severe eye injury if the laser beam is directed at persons or animals. Avoid direct eye exposure.
• Do not direct the laser beam toward other people.
• Do not operate the product around children or allow children to operate the laser.
• Avoid using the product on reflective surfaces. The laser beam may be reflected at the operator or other persons.
• Store the product indoors and avoid substantial knocks, continuous vibration, or extreme temperatures.
• Always keep the product away from dust, liquids, and high humidity. They may damage internal components or affect accuracy.
• If a laser beam hits your eye, you must close your eyes and immediately turn your head away from the beam.
• Do not position the laser beam so that it unintentionally blinds you or others.
• Do not look into a laser beam using magnifying optical devices such as binoculars or a telescope. This will increase the level of eye injury.
• If you use laser goggles to enhance the visibility of the laser beam, note that they will not protect your eyes against laser radiation.

Product Usage Instructions

Before using the RBCLLG2 cross-line laser with grid marks, it is essential to read and understand the user manual. Follow these steps for proper usage:

1. Ensure that you are an adult who can be considered responsible for your actions.
2. Only use the product for determining and checking horizontal and vertical lines. Do not use it for any other purpose.
3. Avoid direct eye exposure to the laser beam. Do not stare into the beam or direct it towards other people, including children.
4. Avoid using the product on reflective surfaces, as the laser beam may be reflected and cause harm.
5. Store the product indoors in a safe place, away from dust, liquids, high humidity, and extreme temperatures.
6. If the laser beam hits your eye, immediately close your eyes and turn your head away from the beam.
7. Position the laser beam in a way that it does not unintentionally blind you or others.
8. Do not use magnifying optical devices such as binoculars or a telescope to look into the laser beam, as this can increase the risk of eye injury.
9. Note that laser goggles will not protect your eyes against laser radiation.

Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating the product.
Safety, performance, and dependability have been given top priority in the design of your cross line laser with grid marks.

INTENDED USE

• The cross line laser with grid marks is intended to be used only by adults who have read and understood the instructions and warnings in this manual, and can be considered responsible for their actions.
• The product is intended for determining and checking horizontal and vertical lines.
• Do not use the product for any other purpose. Use of the product for operations different from intended could result in a hazardous situation.

CROSS LINE LASER SAFETY WARNINGS

• Laser radiation. Do not stare into beam. Class 2 laser product.
• Risk of severe eye injury if the laser beam is directed at persons or animals. Avoid direct eye exposure.
• Do not direct the laser beam towards other people.
• Do not operate the product around children or allow children to operate the laser.
• Avoid using the product on reflective surfaces. The laser beam may be reflected at the operator or other persons.
• Store the product indoors and avoid substantial knocks, continuous vibration or extreme temperatures.
• Always keep the product away from dust, liquids and high humidity. They may damage internal components or affect accuracy.
• If laser beam hits your eye, you must close your eyes and immediately turn your head away from the beam.
• Do not position the laser beam so that it unintentionally blinds you or others.
• Do not look into a laser beam using magnifying optical devices such as binoculars or a telescope. This will increase the level of eye injury.
• If you use laser goggles to enhance the visibility of the laser beam, note that they will not protect your eyes against laser radiation.
• Do not remove or deface warning labels on the product.
• Do not disassemble the product.
• Avoid heavy impact to or dropping of the laser. The accuracy of the laser should be checked before use if it has been dropped or subjected to other mechanical stresses.
• Do not operate the product in explosive areas or in extreme environments.

KNOW YOUR PRODUCT

1. Exit window for laser beam
2. Self-levelling LED indicator
3. ON/OFF switch
4. Battery door
5. Mounting screw hole(1/4”)
6. Laser plate
7. Battery
8. Operator’s manual

SELF-LEVELLING LED INDICATOR

LED

indicator

| Explanation
---|---
Green| Self-leveling is complete.
Red| Self-leveling is not successful; laser line blinks. The product should be placed in a horizontal position of +/-3°.

MAINTENANCE

• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
• For greater safety and reliability, all repairs should be performed by an authorised service centre

SYMBOLS ON THE PRODUCT

• Do not dispose of waste batteries, waste electrical and electronic equipment as unsorted municipal waste.
• Waste batteries and waste electrical and electronic equipment must be collected separately.
• Waste batteries, waste accumulators, and light sources have to be removed from the equipment.
• Check with your local authority or retailer for recycling advice and collection point.
• According to local regulations, retailers may have an obligation to take back waste batteries and waste electrical and electronic equipment free of charge.
• Your contribution to the reuse and recycling of waste batteries and waste electrical and electronic equipment helps to reduce the demand of raw materials.
• Waste batteries, in particular containing lithium, and waste electrical and electronic equipment contain valuable and recyclable materials, which can adversely impact the environment and the human health if not disposed of in an environmentally compatible manner.
• Delete personal data from waste equipment, if any.

SYMBOLS IN THIS MANUAL

• Note
• Parts or accessories sold separately
• Do not stare into the laser beam.

PRODUCT SPECIFICATIONS

Cross line laser with grid marks

• Model RBCLLG2
• Accuracy ±0.5 mm/m
• Laser wavelength 520nm ± 10nm
• Colour Green
• Working range 15 m
• Laser class 2, <1mW
• Projection Cross line with marker
• Self-leveling time 2s ~ 5s
• Self-leveling angle ± 3°
• Operating time 5 h
• Battery technology 2 x AA LR6 Alkaline
• Supply voltage 2 x 1.5V
• Operating temperature range 0°C ~ 40°C
• Storage temperature range -20°C ~ 70°C
• Dimensions L69 x W63 x H72 mm

RYOBI WARRANTY APPLICATION CONDITIONS

In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below.

1. The warranty period is 24 months for consumers and commences on the date the product was purchased.
   This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only on new products.

2. There is a possibility to extend for a part of the range of power tools (AC/DC) the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of products for extended warranty is clearly displayed in stores and / or on packaging and is contained within the product documentation. The end user is required to register his/her newly-acquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their personal data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.

3. The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to:

   • any damage to the product that is the result of improper or lack of maintenance
   • any product that has been altered or modified
   • any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
   • any damage caused by non-observance of the instruction manual
   • any product not displaying the CE approval mark on the rating plate
   • any product that has been attempted to be repaired by a non-authorised warranty service centre or without prior authorisation by Techtronic Industries
   • any product connected to improper power supply (amps, voltage, frequency)
   • any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
   • normal wear and tear spare parts
   • inappropriate use, overloading of the tool
   • use of non-approved accessories or parts
   • Power tool accessories provided with the tool or purchased separately, including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide, etc.
   • Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.

4. For servicing, the product must be sent or presented to a RYOBI authorised service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organisation. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with sender’s address and accompanied by a short description of the fault.

5. A repair / replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffected

6. This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey, Russia, and the United Kingdom. Outside these areas, please contact your authorised RYOBI dealer to determine if another warranty applies.

AUTHORISED SERVICE CENTRE

• Any request or issue with the product can be addressed to your local authorised service centres (visit www.ryobitools.eu ) or directly to: Techtronic Industries GmbH, Max Eyth Straße 10, 71364 Winnenden, Germany.
• Please state the serial number and product type printed on the label.
• RYOBI is a trade mark of Ryobi Limited, and is used under license.
• Techtronic Industries GmbH
• Max-Eyth-Straße 10,
• 71364 Winnenden, Germany
• Techtronic Industries (UK) Ltd Parkway
• Marlow Bucks SL7 1YL UK 20220118v2

References

• Ryobi Tools
• Ryobi Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>