WESEARY WG1 Wireless Gaming Headset User Manual
- June 13, 2024
- WESEARY
Table of Contents
WESEARY WG1 Wireless Gaming Headset
Package Contents
-
Wireless Headset*1
-
User Manual*1
-
Charging Cable*1
-
USB Dongle'”1
Product Features
- Immerse Yourself in Perfect Sound: Indulge in 7.1 Pro surround audio for an unparalleled experience.
- Versatile Connectivity: Seamlessly switch between Bluetooth, 2.4GHz, and wired modes.
- Ultra-Low Delay, Maximum Excitement: Delight in low latency for precise, immersive audio.
- Ultimate Comfort: Lightweight, foldable, and ergonomic design ensures extended comfort during wear.
- Gaming Without Limits: Enjoy up to 50 hours of playtime with just a 2.5 hour charge.
- Vibrant Gaming Ambience: Captivating lighting effects to enhance the gaming experience for passionate gamers.
Before Using: Charging
Note:
- 1.Before using the wireless gaming headset for the first time, please charge it for at least 2 hours.
- When the battery level falls below 10%, you will hear a “Low Battery” voioe prompt
- The red LED will indicate that the wireless headset is charging. Once fully charged, the LED will turn green.
Product Overview*
-
Turn on/off — Long press 3s; Voice prompt: “Power on”/”Power otr’ Play/Pause — Single click
Answer/Hang up call — Single click; Voice prompt: “Di Di” Reject call — Long press 2s;Voice prompt: “Di~” Call back — Double click -
Volume down — Single click
Previous track — Long press 2s -
Volume up — Single click
Next track — Long press 2s
Clear bluetooth devices —Press volume up
and down together for 6s -
Microphone on/ off — Single click; Voice prompt: “Microphone on “f ‘Micro phone off” Bluetooth mode !i 2.4G Dongle mode— Long press 2s -
Tum on/off RGB — Single click; Voice prompt: “RGB on”/ “RGB otr’
7.1 Surround on/off– Double click; Voice prompt: “7.1 Surround on”f’7.1 Surround off”
Re-pairing Bluetooth-Long press 3s; Voice prompt: “Pairing” with Flashing blue light
How to use the three modes*
- None of the three modes work on Xbox.
- To experience the 7.1 surround sound, simply double click the RGB button quickly while using the headset. You will hear a clear prompt “7.1 surround on”.
- Compatible Devices: PSS, PS4, PC, Mac, Laptop, mobile, Nintendo Switch (Invalid Microphone).
Bluetooth Mode
- DelayS48ms
- Compatible with PC/Mac/Nintendo Switch/Mobile;
- Bluetooth mode employs 5.4 Bluetooth technology to establish a wireless connection with devices, allowing you the freedom to move while enjoying audio.
- Tum on the headset and enable Bluetooth on your device (Computer, Mobile phone, Mac, Nintendo Switch). Set it to discoverable mode and search for new devices. Find ‘WG1″ in the searched device list and click to pair.
- Bluetooth mode Voice Prompt & LED Light:
“Bluetooth Mode” : Flashing Blue light
“Bluetooth Connected” : Breathing Blue light
“Bluetooth Disconnected”
4GHz Dongle Mode
- Delays24ms (Ultra Low Latency)
- Compatible with PC/PS4/PS5; If you’re using USB cable or USB dongle to connect a Mac or Nintendo Switch, you’ll need a USB-A to USB-C adapter (package not included).
- 2.4GHz wireless dongle delivers a more stable signal and reduced latency.
-
Plug the USB 2.4GHz Dongle into the device’s port (PC, PS4, PS5)
and turn on the headset. The LED light will be green and flash slowly while
waiting for pairing. -
2.4G Dongle Mode Voice Prompt & LED Light:
“Dongle Mode” : Flashing Green light
“Dongle Connected” : Breathing Green light
“Dongle Disconnected”
USB Wired Mode
- Delay=Oms
- Compatible with PC/PS4/PS5; If you’re using USB cable or USB dongle to connect a Mac or Nintendo Switch, you’ll need a USB-A to USB-C adapter (package not included).
- Plug and play. USB wired mode offers stable audio transmission.
Tips for setting up the device when the headset is connected
-
PC connection setup
·Open “Control Panel” and click “All Control Panel Items.”
·Right-click on “WG1” Gaming Headset and select “Set as Default Device.”
·Go to the “Recording” tab, then right-click on “WG1” and select “Set as Default Device.” -
Mac connection settings
·Click on “System Preferences.”
·Navigate to “Sound.”
·In the “Output” tab, right-click “WG1” and select “Set as default device.”
·In the “Input” tab, right-click “WG1” and select “Set as default device.” -
PS4/PS5 connection settings
·Click “Settings” on the screen.
· Go to the “Devices” tab.
·Click the “Audio Devices” tab.
·Set “WG1” as the default device for both “Input Device” and “Output Device” by right-clicking it.
·Adjust “Volume Control (Headset)” as needed. -
Nintendo Switch connection settings
• Tum on your Nintendo Switch then plug the Nintendo Switch into the docking station and connect the monitor.
·Connect the wireless adapter to a USB port on your Nintendo docking station.
· Press the power button on the headset for 3 seconds to power on.
Warm Tips
- The 1.5m Type-C charging cable also functions as a connection cable in wired mode. Plug and play.
- To experience the 7.1 surround sound, simply double-click the RGB button quickly while using the headset. You will hear a clear prompt saying “7 .1 surround on.”
- Pressing both the “Volume +” and ·volume -· buttons simultaneously for 6 s will clear all Bluetooth devices. After clearing all devices, the system will power off.
- To maintain normal battery life, use the product at least once every two weeks and charge the headset in lime after use.
- lf there’s no sound from the microphone or headset during use. it may be due to compatibility issues or improper use. Contact our after-sales service team for assistance,
- For your safety, refrain from using the headset while cycling or driving, and avoid listening to music at high volumes for extended periods. Handle with care to prevent any damage to the appearance or functionality. Specifications are subject to change without prior notice.
Troubleshooting Q&A
Q: How to fix headset not booting?
A: Charge the headset to resolve potential battery issues.
O: How to troubleshoot Bluetooth pairing problems?
A: To improve Bluetooth pairing:
- Ensure the device is in pairing module.
- Keep devices at a reasonable distance.
- Disconnect other Bluetooth connections if needed.
- Maintain sufficient device battery.
Q: What to do about noisy Bluetoolh earphones?
A: Troubleshoot noise by:
- Checking earphone-device connection.
- Ensuring clear distance and minimal obstacles.
- Charging the earphones adequately.
- Using areas with strong signals.
- Keeping the earphones clean.
- Contact the seller for persistent issues.
Q: How to address disconnection/short Bluetooth range?
A: To fix disconnections or limited range:
- Keep the headset and device close.
- Remove obstacles hindering communication.
- Adjust distance and dear obstructions for a solution.
Specifications
- Model: WG1
- Charging: USB C
- Bluetooth version: V 5.4
- Wireless/Bluetooth range: ~ 10m/33ft
- Drive diameter: <1>50 mm
- Frequency response range: 20Hz-15kHz
- Working voltage: 3. 7V
- Battery capacity: 1200mAh
- Battery charging voltage/curren t: 5V/0.5A
- Battery time: charging about 2.5Hr, using about 50Hr (RGB Off and the 30% volume)
- Support RGB changing lighting effect
Warranty Policy
WESEARY products have a 12-month limited warranty from the original purchase
date. If any issues arise, please contact our support team for assistance.
We’re here to help you resolve any problems. For more information, visit the
WESEARY official website.
htlps://WESEARY.com
Product Warranty
Dear customers
Hello! To apply for after-sales service, please fill out the product warranty card according to your actual situation. Then send the completed warranty card back to the merchant where you purchased the product. Thank you!
-
1, Please tick the reason for after-sales:
Quality
other:
Style look □Uncomfortable -
Please tick the after-sale options you need:
i:IReplacement i:IRepair □ Return -
Please give us your valuable comments:
Note: Please consult the merchant for the specific after-sales address
Business Name: SUCCESS COURIER SL
UK Business Address: CALLE RIO TORMES NUM.1, PLANTA 1,
DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
Phone number: +34910602659
Email address:
successservice2@hotmail.com
Business Name: GOAL REACH CONSULTING LTD
EC Business Address: OFFICE 1029 3 HARDMAN STREET 10TH FLOORS,
PINNINGFIELDS MANCHESTER, UK M3 3HF
REP Phone number: +442921680945
Email address: goalservice@hotmail.com
Manufacturer : Dongguan Huawei Technology Co., Ltd
Address: Room 101, Building 1, No. 39 Yongping Lane, Dongshan, Qishi Town,
Dongguan City, Guangdong Province
Email Address: WESEARYService@outlook.com
Made in China
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, macaques harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
