Clint H4 DAB FM Radio Adapter User Manual

June 13, 2024
Clint

H4

Clint H4 DAB FM Radio Adapter -

User Manual

CAUTION
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user of the presence of insulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts are inside. Refer servicing to qualified personnel.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important safety information

  1. Read the instruction manual.
  2. Keep the instruction manual.
  3. Read all warnings.
  4. Follow the instruction manual.
  5. Do not use this device near water.
  6. Clean only with a dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices
  9. (including amplifiers) that produce heat.
  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the device.
  11. Only use attachments / accessories specified by the manufacturer.
  12. Unplug this device during lightning storms or when unused for long periods of time.
  13. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
  14. This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus.
  15. Do not overload wall outlet. Use only power source as indicated.
  16. Use replacement parts as specified by the manufacturer.

Content of the package

Congratulations with your new Clint H4.
The following is included in the package

Clint H4 DAB FM Radio Adapter - fig1

How to setup Clint H4

Clint H4 DAB FM Radio Adapter - fig2

Simply connect the included RCA cable to your existing Hi-Fi system as illustrated above.

Main Specification

Display 128 x 64 FSTN graphics color display
I/O Connectors 1.Line Out (RCA type)

2.Power connector DC-In (5V-DC)

OSD Language| English,Dansk,Nederlands,Suomi,Francais,Deutsch, Italiano,Norsk,Polski,Portugues,Espahol,Syenska,TOrkce,
AC/DC power adaptor| Input: AC 110-240V (50-60Hz)-> Output: DC 5V/500mA
Dimensions| 190mm x 73mm x 45mm (LxWxH)

Specifications are subject to change without notice

Front panel

Clint H4 DAB FM Radio Adapter - fig3

There are no buttons on the unit itself. Everything is controlled from the included remote control.

Rear side

Clint H4 DAB FM Radio Adapter - fig4

On the H4 the following I/O connectors are available: (1.Line-Out, RCA Type) (2. DC-input, for power).Furthermore, you will find a telescopic antenna for radio signal reception.(Please adjust antenna for best and optimal reception)

Remote control

Clint H4 DAB FM Radio Adapter - fig5

| ON/OFF button| Turn ON / OFF Clint H4. (Or disable alarm)
---|---|---
| Menu button| Press to enter the Main Menu of H4.

| Volume- button| Press to turn down the volume level.
| Mute button| Press to Mute the sound.

| Volume+ button| Press to turn up the volume level.
| Sleep button| Press one or several times for setting the time for automatic shut down of Clint H4.
| Alarm button| Enable or Disable the Alarm function.
| Light button| Press to modify the brightness of the LCD display.

MODE

| Mode button| Switch between DAB or FM mode.

OK

| Enter button| Press to confirm your choice.
| Arrow UP button| Press to navigate UP in Menus etc.
---|---|---
| Arrow DOWN button| Press to navigate DOWN in Menus etc.
| Arrow LEFT button| Press to navigate LEFT in Menus etc.
| Arrow RIGHT button| Press to navigate RIGHT in Menus etc.
| Number buttons 0-9| Press to directly choose a Stored Station (from Preset)
| Favorite Button (Preset)| Press long time to Store a station in memory. Short press to recall the station list (Presets).

DAB/DAB+ Radio Mode.

Choose DAB radio mode if you want to listen to DAB/DAB+ Radio stations from your area.
Switch to DAB mode by pressing Mode button and choose DAB.
Notice to place H4 in an area with good signal reception and adjust the telescopic antenna for optimal reception.
9.1 Search for available DAB stations.
Clint H4 will automatically start station search when it is brand new or after a Factory Reset.

When search is finished then H4 will automatically show a list of the stations found.
Use arrow buttons and enter button to choose a station.
If you later want to do a new station search then you can enter the Menu and choose SCAN -> ENTER.
Notice that any existing station list will be overwritten when doing a new station search.
9.2 How to choose a DAB station
After station search, when station are stored in memory, you browse and choose a station by doing the following. Use or to browse the station memory. Pick your preferred station by pressing the OK button. Available information about the station being played, will now be shown in the LCD display.
9.3 Save a station in Favorite list (Presets)
Clint H4 can save up to 20 stations in a favorite list (Presets). If you want to save the station currently being played then Press the button for 2 seconds. Then choose the preferred position by using the button and Press OK.
9.4 Choose a station from Favorite list (From Presets)
If you want to play a station from the favorite list, then use the number buttons directly (0-9), or press the button once for browsing the favorite list.
9.5 Manual Tuning
You can manually Search (Tune) for available stations. Press the Menu button and choose Manual Scan.Then you can manually choose a frequency (channel) that you want to Scan, by using the buttons. Then H4 will Scan (Search) the given frequency only.
9.6 DAB Display Information
When listening to a DAB station the LCD display will show mixed information, depending on available content from the actual Radio broadcaster. Clint H4 can also show possible available slideshow pictures depending on the actual information being broadcasted. Notice: Not all countries/broadcasters transmit this kind of information.
9.7 Dynamic Range Control (DRC)
If you listen to radio in a noisy environment, it can be an advantage to adjust these settings.By doing so you can raise low sound levels and lower the high sound levels.
3 options available:
DRC Off = No change (default setting)
DRC low = Medium setting
DRC high = Highest setting
9.8 Station order
Radio stations on the list can be sorted after Alphanumeric, Ensemble, Valid. Press Menu button and find Station Order by using buttons. Press OK to confirm.Then change this setting to what you prefer.

 FM Radio Mode

Press Mode button on remote control and choose FM.
The LCD display will also show available RDS information.
10.1 Find an FM station (Search, Scan)
When FM is chosen for the first time, it will begin on the lowest FM frequency in the FM band.

Press long time on   buttons to begin searching (Scan) for a FM station. Clint H4 will search after available stations and automatically stop when it finds a station.
Short pressing buttons and H4 will fine tune in steps of 0.05MHz. If you want to search, and store stations in memory automatically, then start station search from the Menu by choosing Scan and press OK. Now the first 20 stations found will be stored in Memory.
Notice that by doing so, all existing FM stations in memory will be deleted (overwritten).
10.2 Store (save) a station (Presets)
Clint H4 can store up to 20 stations (Favorite stations) in a favorite list (Presets).
If you want to store the station currently being played, then press and hold button for 2 seconds.
Then choose a position by using buttons and press OK.

10.3 Choose a station (from Presets)
Press on the number buttons 0-9 to directly choose a station from the Favorite list. Alternatively, press once on button to show the Favorite list. Navigate and choose your preferred station.

10.4 FM Display Information
When you listen to a FM station the LCD display will show available information about the station and the content being broadcasted (depending on what’s actually being broadcasted from the station provider)Information can be:

  • Program Type (PTY) – Rock, Pop, Talk, News etc.
  • Station Name or frequency – such as BBC Radio 5 or 93.3MHz
  • Audio mode – Mono or Stereo
  • Time and Date – which is transmitted by the station broadcaster.

10.5 FM Audio settings
Clint H4 will automatically playback the Stereo or Mono signal depending on the station being played.You can also force H4 into playing either Mono or Stereo (if available) by changing this setting.

System Settings

To change the system settings of H4 press the Menu button, choose System Settings and press OK.In System Settings, you can choose Equalizer, Backlight, Time/Date, Alarm, Sleep, Factory reset, Info and Language.
11.1 Equalizer
Change between the different equalizer modes depending on the music you mostly listen to:Normal, Classic, Pop, Jazz or Rock Default setting is Normal.
11.2 Backlight
Here you can choose your preferred backlight brightness. You can also setup a timeout period for how long you want to keep the LCD display in the high brightness state (for standby mode or when H4 is not being operated).
Brightness level can be set to either HIGH, MEDIUM or LOW. This can also be adjusted directly from the remote control, by using the light button. Timeout period can be set to 10, 20, 30, 45, 60, 90, 120 or 180 seconds.
11.3 Time and Date settings
Setup Time and Date. Press button to choose and press on button adjust the values. Press OK button to confirm your changes.
button Setup Time format. Choose between 12H or 24H time format. 24H setting is default. Press OK button to confirm your change.
Setup Auto Update. Time and Date can be updated automatically. You can choose between update from DAB or update from FM or no update. Press OK button to confirm your choice.
11.4 Alarm
Clint H4 can be setup for two different Alarms. Alarm 1 and Alarm 2.
Choose either Alarm 1 or Alarm 2 and press the OK button. Now you use buttons and choose to modify Alarm-Mode, Alarm-Time, Alarm-Sound and Alarm Volume. Use buttons to navigate and use buttons to change the value.
When an Alarm is enabled you will see a Clock icon at the top of the LCD display together with the Alarm Time. When an Alarm is activated, then the Alarm sound can be muted (Snooze) by pressing a random button on the remote control. After 5 mins the Alarm will start again. Press the Power button on the remote control to completely stop/deactivate the alarm. Alarm settings can also be chosen directly from the remote control by pressing the Alarm button (watch icon).

Clint H4 DAB FM Radio Adapter - fig11

11.5 Sleep
Sleep setting will automatically shut down H4 after the set time has been reached. You can choose among 15, 30, 45, 60, 75, 90, 105, 120 minutes. When this feature is activated you will notice a bed icon on the LCD display. H4 will enter standby mode once the chosen timeout period occurs. Sleep setting can also be chosen directly from the remote control by pressing on the button.
11.6 Factory reset
H4 can be reset to it’s factory settings by choosing this Menu item.
Notice that all settings will be deleted and restored to defaults.
11.7 Info
Here you can see the actual software information currently installed on in your H4.
11.8 Language
Choose which language you want to see on the LCD Display (OSD language / Menu language)Factory default is English.

Service and support

Should you need any technical support or have questions in general,please always firstly consult your local dealer ,Alternatively ,contact our technical support at help@clintdigital.com. We can help in English or Danish language only .

www.clintdigital.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals