CMA DISH MACHINES UC65e M3 High Temperature Undercounter User Manual
- June 13, 2024
- CMA DISH MACHINES
Table of Contents
- Pump and Motor
- Booster
- Control Panel
- Power Wiring Box
- Fill Solenoid Valve – Effective October 2022
- Fill Valve
- Wash and Rinse Spray Assemblies
- Hoses and Drain Pump
- Panels and Door
- Upper Tank
- Tank Rear
- Chemical Pumps
- Detergent Pump
- Rinse Pump
- Dish Racks, PRV
- Optional Chemical Alarm
- Customer Service
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CMA DISH MACHINES UC65e M3 High Temperature Undercounter
Pump and Motor
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 9 | [02103.01](http://www.partstown.com/cma-dish-machines/CMA02103.01?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, M4, Phil, Pan Head | ||
2 | 1 | 02103.02 | Impeller Housing Cover |
3 | 1 | 02107.01 | Nut, M6 (Left-hand thread) |
4 | 1 | 02103.04 | 1/4″ Lock Washer |
5 | 1 | 02103.05 | 17/64″ Plain Washer |
6 | 1 | 02107.02 | Impeller |
7 | 1 | [02103.07](http://www.partstown.com/cma-dish-machines/CMA02103.07?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Pump Seal | ||
8 | 1 | [02103.30](http://www.partstown.com/cma-dish-machines/CMA02103.30?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Pump Gasket | ||
9 | 1 | 02107.03 | Pump Backing Plate |
10 | 9 | [02103.08](http://www.partstown.com/cma-dish-machines/CMA02103.08?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Nut, M4 | ||
11 | 1 | [02103.10](http://www.partstown.com/cma-dish-machines/CMA02103.10?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Pump Motor Assm, 220V | ||
12 | 1 | [02103.37](http://www.partstown.com/cma-dish-machines/CMA02103.37?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Motor Fan Cover | ||
13 | 1 | [02103.11](http://www.partstown.com/cma-dish-machines/CMA02103.11?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Capacitor, 16 μF | ||
14 | 1 | 02107.04 | Wash Pump Bracket |
15 | 2 | 02107.05 | Bolt, Hex Flange 1/4-20 X 3/8″ SST |
*** | [02103.10](http://www.partstown.com/cma-dish-machines/CMA02103.10?pt- | ||
manual=CMA-UC65E-M3_pm.pdf) | Motor unavailable as separate part |
Booster
Control Panel
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | 02107.15 | Switch, Rocker DPST 250V Neon |
2 | 1 | 02106.51 | Label, Facia UC65e M3 |
3 | 2 | 02103.58 | Gasket, Steam |
4 | 2 | 02107.17 | Standoff, LED Display Board |
5 | 4 | 02104.91 | Screw, 6-18×1/4″ Panhead Phil SS |
6 | 1 | 02106.52 | Panel, Facia UC65e M3 |
7 | 2 | 02104.68 | Nut, 10-32 |
8 | 2 | 02107.20 | Screw, #8 x 3/8″ |
9 | 1 | 02107.21 | Kit, Control Board |
10 | 1 | [00911.10](http://www.partstown.com/cma-dish-machines/CMA00911.10?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, 8-32×3/8 Truss HD | ||
11 | 1 | [02103.57](http://www.partstown.com/cma-dish-machines/CMA02103.57?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Prime Switch | ||
12 | 1 | [02103.51](http://www.partstown.com/cma-dish-machines/CMA02103.51?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Contact, Switch Momentary (N.O.) | ||
13 | 1 | [02103.52](http://www.partstown.com/cma-dish-machines/CMA02103.52?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Housing, Push Button Switch | ||
14 | 1 | [02103.53](http://www.partstown.com/cma-dish-machines/CMA02103.53?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Push Button, Green | ||
15 | 1 | [03485.00](http://www.partstown.com/cma-dish-machines/CMA03485.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Switch Guard | ||
16 | 4 | 04086.00 | #10 Washer |
17 | 2 | [03801.00](http://www.partstown.com/cma-dish-machines/CMA03801.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | 10-32 Lock Nut | ||
— | 1 | 02107.22 | Harness, Switch – NOT SHOWN |
— | 1 | 02107.23 | Harness, Sensor – NOT SHOWN |
— | 1 | 02107.24 | Harness, Main – NOT SHOWN |
Power Wiring Box
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | [02106.02](http://www.partstown.com/cma-dish-machines/CMA02106.02?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Label, Connection Box | ||
2 | 1 | 02106.03 | Cover, Box Wiring |
3 | 1 | 02106.04 | Box, Wiring |
4 | 2 | [00421.51](http://www.partstown.com/cma-dish-machines/CMA00421.51?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, 6-32 X 1/4″ | ||
5 | 1 | [13426.50](http://www.partstown.com/cma-dish-machines/CMA13426.50?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Lug, Ground | ||
6 | 1 | 00905.82 | Screw, 1/4-20 X 3/8″ |
7 | 1 | 02106.05 | Block, Terminal 4-Pole |
8 | 2 | [00940.50](http://www.partstown.com/cma-dish-machines/CMA00940.50?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, 10-32 X 3/8″ Truss Head | ||
9 | 1 | 02106.15 | Bushing, Strain Relief, Small |
10 | 1 | [02103.48](http://www.partstown.com/cma-dish-machines/CMA02103.48?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Contactor, 3-Pole, 25/40A, 120VAC Coil | ||
11 | 2 | 00940.00 | Screw, 10-32 X 1/4″ |
12 | 1 | [02106.06](http://www.partstown.com/cma-dish-machines/CMA02106.06?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Relay, DPDT, 30A, 120VAC Coil | ||
13 | 1 | 06202.46 | Label, Ground |
Fill Solenoid Valve – Effective October 2022
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | [03603.10](http://www.partstown.com/cma-dish-machines/CMA03603.10?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Water Valve 1/2″ 115V JE Complete | ||
2 | 1 | [00738.10](http://www.partstown.com/cma-dish-machines/CMA00738.10?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Solenoid Coil, 115VAC | ||
3 | 1 | [03603.20](http://www.partstown.com/cma-dish-machines/CMA03603.20?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | 1/2″ Water Solenoid Bonnet | ||
4 | 1 | [00786.00](http://www.partstown.com/cma-dish-machines/CMA00786.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | JE Water Valve Plunger & Spring | ||
5 | 1 | [00707.00](http://www.partstown.com/cma-dish-machines/CMA00707.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | 1/2″ Water Solenoid Valve Repair Kit | ||
6 | 1 | [40013.00](http://www.partstown.com/cma-dish-machines/CMA40013.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Fitting, Barb Hose | ||
7 | 1 | 02106.11 | Bracket, Valve, UC65e |
8 | 2 | 02103.16 | Bolt, Hex Flange 1/4-20×3/8″ |
9 | 1 | [03604.50](http://www.partstown.com/cma-dish-machines/CMA03604.50?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Fitting, Flow Disc | ||
10 | 1 | [03604.10](http://www.partstown.com/cma-dish-machines/CMA03604.10?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Washer, Flow Disc |
Fill Valve
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | 02106.53 | Water Valve 115V, Incl Items 2 & 3 |
2 | 1 | 02106.54 | Coil, 115VAC/60/1, 7W |
3 | 1 | 02106.55 | Solenoid Repair Kit |
4 | 2 | [00906.52](http://www.partstown.com/cma-dish-machines/CMA00906.52?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Bolt, Hex Flange, 1/4-20X3/8″ SS | ||
5 | 1 | 02106.56 | Bracket, Fill Valve |
Wash and Rinse Spray Assemblies
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 4 | [00426.00](http://www.partstown.com/cma-dish-machines/CMA00426.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Washer, 5/16″ SS | ||
2 | 4 | [00912.00](http://www.partstown.com/cma-dish-machines/CMA00912.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Nut, 1/4-20 Nylon Lock | ||
3 | 1 | [02103.77](http://www.partstown.com/cma-dish-machines/CMA02103.77?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hub, Upper Wash Arm | ||
4 | 1 | [02103.78](http://www.partstown.com/cma-dish-machines/CMA02103.78?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Washer, Packing | ||
5 | 1 | [02103.79](http://www.partstown.com/cma-dish-machines/CMA02103.79?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, Retaining | ||
6 | 1 | [02103.83](http://www.partstown.com/cma-dish-machines/CMA02103.83?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | O-Ring, 2-1/8″ OD X 1-3/4″ ID X 3/16″ | ||
7 | 2 | [02103.82](http://www.partstown.com/cma-dish-machines/CMA02103.82?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Bearing Assembly | ||
8 | 2 | [02103.98](http://www.partstown.com/cma-dish-machines/CMA02103.98?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Spacer, Nut | ||
9 | 1 | [02103.83](http://www.partstown.com/cma-dish-machines/CMA02103.83?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | O-Ring, 2-1/8″ OD X 1-3/4″ ID X 3/16″ | ||
10 | 1 | [02103.84](http://www.partstown.com/cma-dish-machines/CMA02103.84?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hub, Lower Wash Arm | ||
11 | 1 | [02103.85](http://www.partstown.com/cma-dish-machines/CMA02103.85?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Manifold, Lower FWR | ||
12 | 2 | [02103.86](http://www.partstown.com/cma-dish-machines/CMA02103.86?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Wash Arm Assm, (Incl Item #7) | ||
14 | 4 | 02103.88 | Washer, Nylite |
15 | 4 | 02103.89 | Bolt, 1/4-20 X 1″ |
16 | 1 | [02103.90](http://www.partstown.com/cma-dish-machines/CMA02103.90?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Shaft, Lower | ||
17 | 1 | [02103.91](http://www.partstown.com/cma-dish-machines/CMA02103.91?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | O-Ring | ||
18 | 2 | [02103.92](http://www.partstown.com/cma-dish-machines/CMA02103.92?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hub, Rinse Arm Molded | ||
19 | 4 | [02103.93](http://www.partstown.com/cma-dish-machines/CMA02103.93?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, Truss Head 8-32 X 1/4″ | ||
20 | 2 | [02103.94](http://www.partstown.com/cma-dish-machines/CMA02103.94?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Arm, Right-Hand Rinse (7 Jets) | ||
21 | 2 | [02103.95](http://www.partstown.com/cma-dish-machines/CMA02103.95?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Arm, Left-Handed Rinse (8 Jets) | ||
22 | 4 | [02103.96](http://www.partstown.com/cma-dish-machines/CMA02103.96?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Cap, Rinse Arm, 5/16-24 | ||
23 | 4 | [02103.97](http://www.partstown.com/cma-dish-machines/CMA02103.97?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Spindle, Rinse Arm | ||
— | – | [02103.99](http://www.partstown.com/cma-dish-machines/CMA02103.99?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Rinse Arm Assm (Incl Items 8, 18-23) |
Hoses and Drain Pump
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 2 | 50109.00 | Clamp, Hose |
2 | 1 | [02103.81](http://www.partstown.com/cma-dish-machines/CMA02103.81?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hose, Upper Wash Arm | ||
3 | 8 | [02103.21](http://www.partstown.com/cma-dish-machines/CMA02103.21?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Clamp, Hose Gear-type SS | ||
4 | A/R | [03107.50](http://www.partstown.com/cma-dish-machines/CMA03107.50?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hose, Rubber 1/2″ ID X 0.84″ OD | ||
5 | 1 | 02106.57 | Fitting, Molded Rinse |
6 | 1 | [02103.71](http://www.partstown.com/cma-dish-machines/CMA02103.71?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | 1/2″ Vacuum Breaker | ||
— | — | [02103.72](http://www.partstown.com/cma-dish-machines/CMA02103.72?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Vacuum Breaker Repair Kit | ||
7 | 1 | [00721.00](http://www.partstown.com/cma-dish-machines/CMA00721.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Lock Nut, 1/2″ | ||
8 | 1 | 02103.69 | Bracket, Vacuum Breaker |
9 | 2 | 02103.04 | Washer, Split 1/4″ SS |
10 | 2 | [00923.50](http://www.partstown.com/cma-dish-machines/CMA00923.50?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Nut, Hex 1/4-20 SS | ||
11 | 1 | N/A | Hose, Fill |
13 | 2 | 02106.58 | Barb, Hose 1/2″ X 3/8″ MPT |
14 | 2 | 50109.00 | Clamp, Hose |
15 | 1 | [02104.13](http://www.partstown.com/cma-dish-machines/CMA02104.13?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hose, Discharge | ||
16 | A/R | 02107.71 | Hose, 5/8″ ID X 1″ OD |
17 | 2 | [03101.00](http://www.partstown.com/cma-dish-machines/CMA03101.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Clamp, Hose | ||
18 | 1 | [02103.18](http://www.partstown.com/cma-dish-machines/CMA02103.18?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hose, Booster Fill | ||
19 | 1 | 02106.59 | Tee, 3/4″ Poly |
20 | 1 | 02106.60 | Elbow, 1/2MPTx3/8MPT Reduce 90DE |
21 | 1 | 02106.61 | Valve, Check 3/8 |
22 | 1 | 02106.62 | Hose Barb, 1/2 x 3/8 MPT |
23 | 1 | 02106.63 | Coupler, 3/4″MPT x 3/4″ Hose Barb |
24 | 1 | [02104.11](http://www.partstown.com/cma-dish-machines/CMA02104.11?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hose, Suction Wash Pump | ||
25 | 1 | [02104.05](http://www.partstown.com/cma-dish-machines/CMA02104.05?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hose, Drain Pump Suction | ||
26 | 2 | 02104.10 | Clamp, Hose |
27 | 1 | [02104.34](http://www.partstown.com/cma-dish-machines/CMA02104.34?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Elbow, Pump Suction | ||
28 | 2 | [03101.00](http://www.partstown.com/cma-dish-machines/CMA03101.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Clamp, Hose Gear-Type | ||
29 | 1 | [02104.35](http://www.partstown.com/cma-dish-machines/CMA02104.35?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Gasket, Pump Suction | ||
30 | 1 | [02104.36](http://www.partstown.com/cma-dish-machines/CMA02104.36?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Flange, Pump Suction | ||
31 | 1 | [02104.07](http://www.partstown.com/cma-dish-machines/CMA02104.07?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Pump, Drain | ||
32 | 2 | 02107.74 | Screw, #8 x 1/2″ Self-Taping |
33 | 2 | 02103.16 | Bolt, Hex Flange 1/4-20 x 3/8″ SS |
34 | 1 | 02104.06 | Bracket, Drain Pump |
35 | 1 | [03101.00](http://www.partstown.com/cma-dish-machines/CMA03101.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Clamp, Hose | ||
36 | 1 | 02106.19 | Hose, Drain Molded |
37 | 1 | [02106.50](http://www.partstown.com/cma-dish-machines/CMA02106.50?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Anti-Siphon Assembly Complete |
Panels and Door
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | [02104.69](http://www.partstown.com/cma-dish-machines/CMA02104.69?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Wrapper, Outer Panel | ||
2 | 1 | [02104.17](http://www.partstown.com/cma-dish-machines/CMA02104.17?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Gasket, Door 1/8″ x 7/8″ x 22-5/8″ | ||
3 | 1 | 02106.64 | Panel, Front |
4 | 1 | [02104.73](http://www.partstown.com/cma-dish-machines/CMA02104.73?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Door Welded Assm | ||
5 | 1 | [02104.88](http://www.partstown.com/cma-dish-machines/CMA02104.88?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Seal, Door Hinge RH | ||
6 | 2 | [02104.77](http://www.partstown.com/cma-dish-machines/CMA02104.77?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Spring, Door | ||
7 | 2 | [02104.76](http://www.partstown.com/cma-dish-machines/CMA02104.76?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Arm, Door Spring | ||
8 | 1 | 02106.65 | Screw, 8-32 x 3/16″ Phil SS |
9 | 1 | [02104.78](http://www.partstown.com/cma-dish-machines/CMA02104.78?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Activator, Door Switch | ||
10 | 1 | [02104.87](http://www.partstown.com/cma-dish-machines/CMA02104.87?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Seal, Door Hinge LH | ||
11 | 1 | [02104.63](http://www.partstown.com/cma-dish-machines/CMA02104.63?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Gauge, Pressure 0-60PSI | ||
12 | 1 | [00940.50](http://www.partstown.com/cma-dish-machines/CMA00940.50?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, 10-32×3/8″ Truss Head Phil SS | ||
13 | 1 | [00425.54](http://www.partstown.com/cma-dish-machines/CMA00425.54?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Tubing, 1/4″ Natural | ||
14 | 1 | 02106.66 | Adaptor, 1/4″x1/8″NPT Female Plastic |
15 | 1 | [02104.67](http://www.partstown.com/cma-dish-machines/CMA02104.67?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Foot, Adjusting | ||
16 | 1 | 02106.13 | Panel, Rear |
Upper Tank
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | 02106.67 | Screen, Scrap |
2 | 1 | See Pg10 | Seal, Door Hinge RH & LH |
3 | 1 | 02106.68 | Plate, Nut 4-40 |
4 | 1 | 02106.69 | Bracket, Switch Door |
5 | 1 | [43019.00](http://www.partstown.com/cma-dish-machines/CMA43019.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Switch, Door 15A | ||
6 | 2 | [13826.00](http://www.partstown.com/cma-dish-machines/CMA13826.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, 4-40×1/2″ Pan Head Phil SS | ||
7 | 2 | [00965.00](http://www.partstown.com/cma-dish-machines/CMA00965.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Nut, Grip 6-32 W/ Nylon Insert SS | ||
8 | 1 | 02106.70 | Plug, 1/2″ |
9 | 1 | 02106.71 | Gasket, Fiber |
10 | 1 | 02106.72 | Nut |
11 | 1 | 02107.10 | Thermistor |
12 | 1 | 02106.73 | Adapter, Thermistor |
13 | 1 | [02104.18](http://www.partstown.com/cma-dish-machines/CMA02104.18?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Element, Tank 2kW 240VAC | ||
14 | 1 | 02106.74 | O-Ring |
15 | 1 | [02106.75](http://www.partstown.com/cma-dish-machines/CMA02106.75?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Nut, 1/2″ NP | ||
16 | 1 | [02104.28](http://www.partstown.com/cma-dish-machines/CMA02104.28?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Thermostat, Fixed Snap, 212°F |
Tank Rear
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | [03801.00](http://www.partstown.com/cma-dish-machines/CMA03801.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Nut, 10-32 SS | ||
2 | 1 | N/A | Clip |
3 | 1 | 02106.76 | Bracket, Sensor |
4 | 1 | [02106.77](http://www.partstown.com/cma-dish-machines/CMA02106.77?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Sensor, Level | ||
5 | 1 | 02104.54 | Clamp, Hose |
6 | 2 | 02104.56 | Hose, Air |
7 | 2 | N/A | Clamp, Double Conduit |
8 | 1 | N/A | Clamp, 3/4″ Plated Strap |
9 | 1 | 02107.48 | Nut, Grip, 1/4-20 W/ Nylon Insert SS |
10 | 1 | 02104.53 | Trap, Air |
11 | 1 | 02104.55 | Gasket, Air Trap |
12 | 1 | [02104.57](http://www.partstown.com/cma-dish-machines/CMA02104.57?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | O-Ring | ||
13 | 1 | 02104.59 | Cover, Air Trap |
Chemical Pumps
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | 43078.08 | Label, Rinse Additive |
2 | 1 | [43078.05](http://www.partstown.com/cma-dish-machines/CMA43078.05?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Label, Detergent | ||
3 | 2 | [02104.48](http://www.partstown.com/cma-dish-machines/CMA02104.48?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Tube Stiffener, 1/2″ x 11-7/8″ | ||
4 | 1 | [02104.47](http://www.partstown.com/cma-dish-machines/CMA02104.47?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Strainer | ||
5 | A/R | 02106.78 | Hose, 4MM ID x 6MM (1/4″) OD PVC |
5a | A/R | [00425.24](http://www.partstown.com/cma-dish-machines/CMA00425.24?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Chemical Tubing, White | ||
6 | A/R | [02104.37](http://www.partstown.com/cma-dish-machines/CMA02104.37?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hose, 1/4″ID x 3/8″OD PVC | ||
7 | 1 | 02106.79 | Nut |
8 | 1 | [02104.39](http://www.partstown.com/cma-dish-machines/CMA02104.39?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Gasket | ||
9 | 1 | [02106.80](http://www.partstown.com/cma-dish-machines/CMA02106.80?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Kit, Detergent Fitting | ||
10 | 1 | 02106.81 | Nut, Compression Rinse |
11 | 1 | 02106.82 | Nut, Chemical Tube |
12 | 1 | 02107.14 | Bracket, Chemical Pump |
13 | 1 | [00415.00](http://www.partstown.com/cma-dish-machines/CMA00415.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Rinse Chemical Pump Assembly | ||
14 | 1 | [00415.00](http://www.partstown.com/cma-dish-machines/CMA00415.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Detergent Chemical Pump Assembly | ||
15 | 1 | [00931.00](http://www.partstown.com/cma-dish-machines/CMA00931.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Nylon Zip Tie, 4″ |
Detergent Pump
NO. | REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 2 | [02104.47](http://www.partstown.com/cma-dish-machines/CMA02104.47?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Strainer | ||
2 | 2 | [02104.48](http://www.partstown.com/cma-dish-machines/CMA02104.48?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Tube Stiffener, 1/2″ID x 11-7/8″ | ||
3 | 1 | [43078.05](http://www.partstown.com/cma-dish-machines/CMA43078.05?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Label, Detergent | ||
4 | A/R | [02104.37](http://www.partstown.com/cma-dish-machines/CMA02104.37?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hose, 1/4″ID x 3/8″OD | ||
5 | 4 | [00931.00](http://www.partstown.com/cma-dish-machines/CMA00931.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | 4.5″ Nylon Cable Tie | ||
6 | 1 | [02257.00](http://www.partstown.com/cma-dish-machines/CMA02257.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Squeeze Tube, Norprene 8″ | ||
7 | 1 | [00911.00](http://www.partstown.com/cma-dish-machines/CMA00911.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, 8-32×1/2″ Panhead | ||
8 | 1 | [00418.00](http://www.partstown.com/cma-dish-machines/CMA00418.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Peristaltic Pump Cover | ||
9 | 1 | [00419.00](http://www.partstown.com/cma-dish-machines/CMA00419.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Peristaltic Pump Rotor | ||
10 | 1 | [00919.00](http://www.partstown.com/cma-dish-machines/CMA00919.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, 10-32 x 1-1/2″ Panhead | ||
10a | 2 | [00918.10](http://www.partstown.com/cma-dish-machines/CMA00918.10?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, 10-32 x 1-1/2″ Flathead | ||
11 | 1 | [00417.10](http://www.partstown.com/cma-dish-machines/CMA00417.10?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Peristaltic Pump Block (Black) | ||
12 | 1 | [00416.00](http://www.partstown.com/cma-dish-machines/CMA00416.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Peristaltic Pump Motor 110V/60Hz | ||
13 | 1 | 00448.00 | Barrel Connector, Male |
14 | 2 | [02104.52](http://www.partstown.com/cma-dish-machines/CMA02104.52?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | 1/4″ Hose Barb | ||
15 | 1 | [00415.20](http://www.partstown.com/cma-dish-machines/CMA00415.20?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Peri Pump Assm (Incl items 6-13) |
Rinse Pump
NO. | REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 2 | [02104.47](http://www.partstown.com/cma-dish-machines/CMA02104.47?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Strainer | ||
2 | 2 | [02104.48](http://www.partstown.com/cma-dish-machines/CMA02104.48?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Tube Stiffener, 1/2″ID x 11-7/8″ | ||
3 | 1 | [43078.05](http://www.partstown.com/cma-dish-machines/CMA43078.05?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Label, Rinse Additive | ||
4 | A/R | [02104.37](http://www.partstown.com/cma-dish-machines/CMA02104.37?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Hose, 1/4″ID x 3/8″OD | ||
5 | 4 | [00931.00](http://www.partstown.com/cma-dish-machines/CMA00931.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | 4.5″ Nylon Cable Tie | ||
6 | 1 | [02104.58](http://www.partstown.com/cma-dish-machines/CMA02104.58?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Squeeze Tube, Norprene 1/8″ | ||
7 | 1 | [00911.00](http://www.partstown.com/cma-dish-machines/CMA00911.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, 8-32×1/2″ Panhead | ||
8 | 1 | [00418.00](http://www.partstown.com/cma-dish-machines/CMA00418.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Peristaltic Pump Cover | ||
9 | 1 | [00419.00](http://www.partstown.com/cma-dish-machines/CMA00419.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Peristaltic Pump Rotor | ||
10 | 1 | [00919.00](http://www.partstown.com/cma-dish-machines/CMA00919.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, 10-32 x 1-1/2″ Panhead | ||
10a | 2 | [00918.10](http://www.partstown.com/cma-dish-machines/CMA00918.10?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Screw, 10-32 x 1-1/2″ Flathead | ||
11 | 1 | [00417.10](http://www.partstown.com/cma-dish-machines/CMA00417.10?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Peristaltic Pump Block (Black) | ||
12 | 1 | [00416.00](http://www.partstown.com/cma-dish-machines/CMA00416.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Peristaltic Pump Motor 110V/60Hz | ||
13 | 1 | 00448.00 | Barrel Connector, Male |
14 | 2 | [02106.12](http://www.partstown.com/cma-dish-machines/CMA02106.12?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | 1/8″ Hose Barb | ||
15 | 1 | [00415.20](http://www.partstown.com/cma-dish-machines/CMA00415.20?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Peri Pump Assm (Incl items 6-13) |
Dish Racks, PRV
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 1 | [12960.01](http://www.partstown.com/cma-dish-machines/CMA12960.01?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Dish Rack, Flat | ||
2 | 1 | [12960.03](http://www.partstown.com/cma-dish-machines/CMA12960.03?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Dish Rack, Peg | ||
3 | 1 | [13602.20](http://www.partstown.com/cma-dish-machines/CMA13602.20?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | 1/2″ Pressure Regulator, OPTIONAL |
Optional Chemical Alarm
ITEM NO. | NO. REQ’D | P/N | DESCRIPTION |
---|---|---|---|
1 | 3 | [00400.00](http://www.partstown.com/cma-dish-machines/CMA00400.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Conduit, 3/8” Sealtite | ||
2 | 1 | [00401.00](http://www.partstown.com/cma-dish-machines/CMA00401.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | S.T. 3/8” Straight Connector | ||
3 | 1 | [00402.00](http://www.partstown.com/cma-dish-machines/CMA00402.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | S.T. 90 Degree 3/8” Connector | ||
4 | 1 | [00406.00](http://www.partstown.com/cma-dish-machines/CMA00406.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Control Box Light, .5” Diameter, Red | ||
5 | 1 | 00435.00 | Squeeze Tube, 8” |
6 | 1 | 00521.00 | Wire, 18 Gauge, Orange, 6 ft. |
7 | 1 | 00531.00 | Wire, 18 Gauge, White, 6 ft. |
8 | 5 | [00931.00](http://www.partstown.com/cma-dish-machines/CMA00931.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Wire Tie, Small | ||
9 | 1 | 12510.00 | Sanitizer Alarm Box Assembly |
10 | 1 | 12511.00 | Sanitizer Low Level Vacuum Switch |
11 | 1 | [12512.00](http://www.partstown.com/cma-dish-machines/CMA12512.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Sanitizer Alarm Buzzer, 120 Volts | ||
12 | 4 | 40126.10 | #10 x 3/4″ Sheet metal Screw |
13 | 4 | 40127.00 | Wall Anchors |
14 | 1 | [00426.00](http://www.partstown.com/cma-dish-machines/CMA00426.00?pt- | |
manual=CMA-UC65E-M3_pm.pdf) | Y Hose Connector, 3/16” |
Customer Service
C M A D I S H M A C H I N E S
1 2 7 0 0 K N O T T A V E N U E
GARDEN GROVE, CALIFORNIA 92841
8 0 0 – 8 5 4 – 6 4 1 7
FAX 714-895-214
www.cmadishmachines.com
Buy Parts
References
- CMA Dishmachines – Commercial Glass & Warewashing Equipment
- CMA Dishmachines – Commercial Glass & Warewashing Equipment
- CMA Dishmachines - Parts and Supplies | USA-CLEAN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>