UMEILUCE mys170 4 Light Black Vintage Lantern Chandelier Installation Guide
- June 13, 2024
- UMEILUCE
Table of Contents
UMEILUCE mys170 4 Light Black Vintage Lantern Chandelier
Installation diagram
Installation instruction
First of all, open the box, find out the various accessories and carefully place on a clean platform to prevent scratches and collisions with the lamp body.
- A: Screw the pipe over the ball and tighten it.
- B: Screw the two lamps on to align the holes.
- C: Lock the elbow with the Mut.
- D: Cover the metal multilayer cover and lock it tightly.
- E: Lock 4 decorative arc iron plates.
- F: Put on the cap tube and screw on the bulb.
- G: Connect the lamp body with the auction top plate with the lifting chain. Remove the hanging plate and use gecko nails and expansion screws for the hanging plate Secure the light cable and power cable in the required position.
Caution Turn off the power before connecting cables And connect with the correct polarity.
Notes:
It is strictly prohibited to wipe the surface of lamp body with tlanna and
other chemical solvents. A cotton cloth is recommended Glue a small amount of
water to gently wipe the lamp.
Warn tips: this lamp is only for indoor installation and is strictly
prohibited for outdoor use
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>