DENLER DFLv6 Smart Door Lock User Manual

SMART DOOR LOCK
USER MANUAL
MODEL – DFLv6

DFLv6 Smart Door Lock

https://denler.in/warranty-registration/
Scan the QR Code to register your product
for hassle-free warranty services.

IMPORTANT NOTE :
We recommend to keep atleat 1 mechanical key outside your home. So, in case of emergency you will be able to unlock the smart lock.
This is helpful when there is any kind of electronic failure in lock.

Product Dimensions

Lock Elements

Product Specifications

Keypad Functions

Lock Setup Menu

Adding new user

Touch the keypad to wake up lock and touch *# to enter system menu. If the lock is in factory reset mode, no admin password will be asked. If you have already added admin enter your admin password to enter system menu

Now select op1.New User” by touching number 1 on keypad. Where you can add Face, Fingerprint & RFID Card & PIN

To add Fingerprint & RFID Card & PIN, select op1.Register Key and if you want to add face ID then select op2. Enroll on face by selecting The respect option enough keypad number 1 or 2

Adding PIN, RFID or Fingerprint

If you select “1.Register Key”, this screen will appear. On this screen, User Num 00 is the ID assigned by system to specific entry. Here you can either enter numeric password or touch RFID card near number 5 or place your finger on fingerprint sensor to add any of the 3 above biometric details.

You can set 6 to 9 Digit numeric password. Aer entering numeric password system will voice prompt “Please Enter Again” enter the same password again to verify. Then, you will see “Succeed” message on screen with voice prompt “Operation Succeed ”

Adding Face ID

If you select “2.Enrol on Face”, this screen will appear. On this screen, User Num 00 is the ID assigned by system to specication entry. Adjust you face posiont of camera as guided by system voice prompt.

Deleting User

Just like adding a new user you can delete the users from lock. It can be done by using the ID assigned to user or you can verify user using fingerprint of that par. Select *# then admin password # to enter system menu.

Now select op2.Delete User” by touching number 2 on keypad. Where you can add delete user.

On this screen, enter the user ID or use the fingerprint of the user you want to delete. And confirm by pressing “#”

NOTE : In case of temporary user like Maid, remember the User ID while adding fingerprint or PIN. So, you can delete this user even when user is not present at the of DeLeon can directly delete user with the help of user ID. Else, you have to delete all the user and add again.

Volume Setup

Now select number “3” on keypad for System settings. Where you can setup Time & Date, Volume, Verify Mode & Language

Select number “1” to change the date on lock. Enter the date using keypad number.

Select number “2” to change the volume of lock. Select “1” to increase & “2” to decrease the volume.

Door Direction Setup
IMPORTANT NOTE : Door direction setup is not required if your door lock function is working properly i.e. when you press lock button on the keypad, lock bolts are coming out from lock body/mortise  unlock, they are going back inside the lock body.

Select number “4.Install Set” in system menu. Then select “1.Direc”. If your door is left opening from outside then select “Set Le” and If your door is right opening from outside then select “Set Right”. Aer setup check the lock function corking properly or change the door direc

Factory Reset

IMPORTANT NOTE : Factory reset will delete all the user data including fingerprints, face,  RFID cards, PINS. Your lock will get disconnected from you Wi-Fi network and mobile app as well. You have to reconfigure all the seer factory reset.

Touch the keypad to wake up lock and touch *# to enter system menu. If the lock is already in factory reset mode, no admin password will be asked. If you have already added admin enter your admin password to enter system menu.

Now select number “6” on keypad for factory restore settings.
Enter admin password when asked and press “#” to confirm factory reset.

Dual or Single Verification Mode

Select number “4” to select verification mode. Select “1” for single verification “2” for double verification i.e. print + PIN Number to unlock.

Mobile App Setup

IMPORTANT NOTE : Distance between Smart Lock and Wi-Fi router should be less than 15 feet. Make sure your Smartphone is connected with 2.4Ghz Wi-Fi network only (Does not support 5Ghz Wi-Fi Network). Location Bluetooth is turned ON. Scan following QR code to download “Xhome” mobile app for Android or iOS smart phones.

Connect mobile to 2.4Ghz Wi-Fi Network, turn ON Bluetooth & Location/GPS.
Click Sign Up & create account with Xhome app, if already registered click Login.
While installing app give all permission or access to mobile app when asked. i.e location, Files and search nearby devices (If asked) else it will not detect smart lock in app.

|
---|---
https://play.google.com/store/apps/details?id=com.lancens.wxdoorbell&hl=en_IN&gl=US| https://apps.apple.com/us/app/xhome/id1193156184

Scan QR code to as per your device type i.e. android or iOS to download Xhome mobile app

Open Xhome app & click “Accept” to proceed for using this app. And allow all the access permissions if asked while installing| Click “Create Account” if you have not registered any account in Xhome app before.| Enter valid email ID, set password (Do not use special characters in password) & click
“Get CAPTCHA” Check you email inbox for captcha, enter the captcha and click register

Aer successful login, click “+” icon at the right top corner of Xhome app and click “Add Device” to proceed.

Click “Smart E-Lock” then on the next screen Click “Join Wi-Fi by QR”

Aer clicking “Join Wi-Fi by QR” Now you have to adaptation Network Configuration lock. For that Touch the keypad to wake-up lock, Press 1# then admin password # Aer successful login, you will see “Start work” message then “Configuring”

Aer “Configuring” message on lock click “CONFIRM THAT ENTERED CONNECTED MODE” App will display your Wi-Fi network details, verify the details and click “NEXT”

QR code will be displayed on the next screen, hold your phone around 20cm in front of camera until  hear single BEEP sound

During this step you can see your QR code position lock display to adjust QR code in the given marking position

Mobile App Features

Aer successfully connecting lock with app, you will see this option set the device name.

On the home screen of Xhome app you can see various lock features. Click Play button to start video or Click unlock icon to unlock remotely

In the settings section, you can setup Power Saving Mode, Notification remote Unlock , Firmware Upgrade etc.

In the power saving mode section you can set Normal Standby to access live camera stream anytime or rigger mode to activate camera video stream only when bell icon is pressed on smart lock.

You will get the notification screen to start video and unlock when visitor presses bell icon the smart lock

After starting intercom through notification will se various ope unlock, capture photo and talk with visitor

Frequently Asked Question (FAQs)

1. Does the face recogniork for faces with beard?

3D face recognioperly for face with beards and it cannot recognize face structure pointers properly.

2. What is the purpose of auto lock feature?

You can set the duraor lock aer unlocking opera

3. Aer installaesponse when keypad is touched

In this case, check whether the baeries are charged or not.

4. Unable to register fingerprint

Make sure fingers and fingerprint sensor on the smart lock is clean and there is no sign of dirt or oil stains.

5. Smart lock draining baery faster

Keeping the moonoo frequently can drain out baery faster than usual.

6. What happens when wrong password or finger is used to aempt unlocking? 6. What happens when wrong password or finger is used to aempt unlocking?

Entering wrong password or fingerprint 5 ow will turn on siren and you have to wait for 90 seconds to access lock.

7. Lock bolts are stuck and working forcefully only by hand

If your door slams when lock bolts are outside, this will bent lock bolts and either make them stuck outside or affects its func. In this case you have to contact Denler and purchase a new lock body.

8. Is it required to keep emergency mechanical key always with you?

Yes, the purpose of mechanical key is to unlock smart door in situae baery is completely drained out or any other electronic malfunc

References

• Smart Door Lock, Digital Door Lock, Wi-Fi Doorbell | Denler

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>