BRUNNER 0708043N Portable Gas Stove Instructions

BRUNNER 0708043N Portable Gas Stove

Product Information

The product is a portable gas stove designed for outdoor use. It operates on butane gas and has a maximum power output of 2.2 kW. The stove features a control panel with a high/low control knob for adjusting the flame intensity. It also has a piezo-ignition system for easy and reliable ignition. The stove is equipped with a thermocouple that acts as a safety device, automatically shutting off the gas supply when the flame is extinguished. The stove comes with various components, including a cartridge cover, pan support, drip pan, burner, and cartridge lever. It is important to follow the safety instructions and guidelines provided in the user manual for proper usage and maintenance of the stove.

Product Usage Instructions

1. Check that the seals between the appliance and the gas cartridge are in place and in good condition before connecting the gas cartridge.
2. To connect the gas cartridge, open the cartridge cover and insert the cartridge head forward with the notch facing upwards.
3. Hold the knob in this position for a few seconds to activate the thermocouple. Repeat this process until the burner ignites.
4. Move the control knob to the desired position for flame intensity adjustment. Never position the cartridge lever in the UNLOCK position during use.
5. Ensure that the pan or griddle plate used does not exceed 340 mm in size to prevent covering the gas cartridge compartment and causing overheating.
6. After use, clean the burner head with a brush.
7. For storage, mount the red protective cap on the cartridge and always keep the gas cartridge in a cool, dry, and well-ventilated place.
8. When maintaining or cleaning the stove, make sure to use water and soap for this purpose.
9. Keep children away from the stove during use, as some parts may become very hot.

Refer to the user manual for troubleshooting tips in case of issues such as no gas or no ignition. Additionally, the manual provides technical specifications of the product, including gas pressure, heat output, gas consumption, and safety features.

DANGER

EXPLOSION HAZARD:
Do not use a pan or a griddle plate larger than 340 mm as can cover the gas cartridge compartment and cause the gas cartridge to overheat.

Product Description

1. Body case
2. Cartridge cover
3. Pan support
4. Drip pan
5. Burner
6. Cartridge lever
7. Control panel
8. High/low control knob with piezo-ignition
9. Ignition electrode
10. Thermocouple

INSTRUCTIONS FOR USE

IMPORTANT

• Read the instructions carefully before use to familiarize yourself with the appliance before connecting it to its gas cartridge.
• Keep these instructions for future reference.
• This appliance shall only be used with a Powergaz 0708021N butane cartridge. It may be hazardous to attempt to fit other types of gas containers.
• Don’t use appliances when the ambient temperature is higher than 35℃.
• Don’t use appliances when the cover of the cartridge enclosure is in the open position.
• Release or disconnect the gas cartridge after every use.
• This appliance should only be used in well-ventilated areas (2m /h/kW min.) away from inflammable materials.
• Keep young children away from the appliance.

WARNING

• Check that the seals (between the appliance and the gas cartridge) are in place and in good condition before connecting the gas cartridge (fig.6).
• Don’t use the appliance if it has damaged or worn seals.

SAFETY DEVICE

• The appliance is equipped with a safety device that stops the flow of gas if the pressure in the cartridge, e.g. because of overheating, becomes too high.

To continue usage…

• Turn the control knob to the “●” position.
• Turn the cartridge lever to the “UNLOCK” position and take the cartridge out.
• Turn the control knob to the ignition position to release any excess pressure inside the valve.
• Push down the reset lever with a red rubber cap.
• Place the new cartridge after checking that the cartridge lever is in the “UNLOCK” position. ( If the new cartridge is not in hand, cool down the cartridge in use with water.)
• The cartridge can only be installed when the control knob is in the OFF position.

USING THE STOVE FOR THE FIRST TIME

1. Check that the control knob (8) is set to position “●” by turning it clockwise and the cartridge lever (6) is set to UNLOCK.
2. Open the cartridge cover (2) and insert the cartridge, with the head to the front, so the notch points upwards and aligns in the value guide (fig.2).
3. Press the cartridge lever (6) down (fig.3) and close the cartridge cover.
4. If you hear a “hissing” noise, the cartridge has not been correctly fitted. Do not attempt to ignite the appliance but move lever (6) to the “Unlock” position and repeat steps (1-4).
5. Turn the control knob (8) fully to the ignition position ” ” until it clicks. (fig.4) Hold the knob in this position for a few seconds to prime the flame-guard thermocouple. Repeat this action until the burner ignites.
6. Adjust the control knob to the required position. (fig.5) Never set the cartridge lever (6) to the “UNLOCK” position during use!

FLAME GUARD
The thermocouple placed in the flame (10) controls a valve that automatically cuts off the gas intake to the burner when this is extinguished (air draught or overflowing liquid, for example).

AFTER USE

1. Turn the control knob (8) into the “●” position.
2. Check if the burner is extinguished before setting the cartridge lever (6) to the “UNLOCK” position.
3. When the appliance has cooled completely, for your own safety, remove the cartridge.
4. Fit the red protective cap and always store the gas cartridge in a cool, dry, well-ventilated place.

CHANGING THE CARTRIDGE

• The cartridge may be removed even if it is not empty.

Once your equipment has fully cooled:

• Check that the gas inlet is fully closed by turning the control knob (8) clockwise to the “●” position and that the burner (5) is extinguished.
• Disconnect the cartridge by putting the cartridge lever (6) in the “UNLOCK” position.
• Open the cartridge compartment cover (2) and remove the cartridge.
• Butane cartridges must be changed in a safe place, e.g. in the open air or in a well-ventilated location, preferably outside, away from any source of ignition such as naked flames, pilots, electric fires, and away from other people.
• Check the seals before connecting a new gas cartridge to the appliance. (fig.6)
• Put in a new cartridge by following the instructions in the paragraph “USING THE STOVE FOR THE FIRST TIME”.

STORAGE AND MAINTENANCE

• When the appliance has cooled completely it should be cleaned of any residues of food or fat after each use.
• Store the appliance and the cartridge in a cool, dry, and well-ventilated area, out of reach of children. Do not modify the appliance.

WARNING

• This appliance can only be used with Powergaz 0708021N butane cartridge.
• Do not use an appliance that is leaking, damaged or that does not operate properly.
• Always place the stove on a horizontal stable and heat-resistant surface.
• Do not move the appliance during use.
• Never place two stoves close to each other.
• Place the stove at least 20cm away from inflammable materials.
• Do not use any pans that cover the cartridge compartment.
• Do not use a pan smaller than 120mm or larger than 340mm in diameter for each burner. Do not use vessels with concave or convex bottoms.
• If there is a leak in the appliance (smell of gas), immediately turn the control knob (8) into the “●” position. Take the appliance outside where a possible leak may be detected. If you wish to check for leaks on the appliance, do it outside and never try to detect the leaks with a flame, but always use soapy water!
• CAUTION: Accessible parts may become very hot, Keep children away from the appliance.

TROUBLESHOOTING

• No gas

  • Check whether the gas cartridge was inserted properly
  • The gas cartridge is empty (test by shaking the cartridge)
  • Outside temperature below 4℃, move to warmer surroundings

• No ignition
  

  • Clean the burner head with a brush

In the event of any problems, please contact the dealer.

TECHNICAL CHARACTERISTICS

• Model: 0708043N
• Type of gas: Butane
• Category direct pressure: Vapour pressure butane
• Nominal heat input: 2.2 Kw
• Gas consumption: 160 g/h
• Orifice diameter: 0.6 mm
• Outlet pressure of the valve: 7.65 kPa
• Switch the pressure range of the overpressure shut-off device
  • 1-stage safety device: 4.0 bar – 6.0 bar
  • 2-stage safety device: 4.0 bar – 6.0 bar

Original product from: Brunner Srl • Via Buozzi, 8 • 39100 Bolzano • Italy.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>