Gemma Group Flex L Copy Router User Guide
- June 13, 2024
- Gemma Group
Table of Contents
Gemma Group Flex L Copy Router
Product Information
The Flex L Copy Router is a manual copy router designed for standard machining. It features a sturdy electro-welded steel basement with 3 pneumatic probes of different diameters (5mm, 8mm, and 10mm) and 4 horizontal moving pneumatic clamps. The cutting unit is equipped with a 3-phase electrospindle that has an adjustable speed range of 2,800 to 12,000 rpm. The machine can work on various materials including steel, stainless steel, iron, and aluminum. It has reference stops for position adjustment and a Venturi lubrication system. The machine’s safety features includeintegral cutting area protections and compliance with CE safety regulations.
Technical Specifications
- Structure: Electro-welded steel basement
- Pneumatic Probes: 3 probes with diameters of 5mm, 8mm, and 10mm
- Pneumatic Clamps: 4 horizontal moving clamps
- Copy Template: Included for standard machining
- Cutting Unit: 3-phase electro spindle with adjustable speed (2,800 to 12,000 rpm)
- Power Supply: Electric power – 400V/50Hz, Motor power – 1.5kW, Air compressed supply – 7 Bar, Air consumption per cycle – 24 Nl
- Cutting Capacity: Working area – 3,000 mm (X-axis), 400 mm (Y-axis), 350 mm (Z-axis)
- Dimension: Cutter rotation speed – Adjustable, Working area – 2,600x265x200 mm
- Optional Features: Autotrasformatore per voltaggio speciale, Imballaggio per trasporto marittimo
- Machine Layout: Weight – 750 kg, Dimensions – 3,700×1,200×1,850 mm
Product Usage Instructions
- Ensure that the machine is placed on a stable and leveled surface.
- Connect the machine to the electric power supply (400V/50Hz) and ensure it is properly grounded.
- Connect the air-compressed supply (7 Bar) to the machine.
- Adjust the position of the pneumatic probes according to the desired diameter (5mm, 8mm, or 10mm).
- Position the workpiece securely between the horizontal moving pneumatic clamps.
- Insert the copy template for standard machining into the machine.
- Adjust the speed of the cutting unit using the potentiometer and inverter within the range of 2,800 to 12,000 rpm.
- Make sure to set reference stops for position adjustment as required.
- If needed, apply lubrication using the Venturi lubrication system.
- Start the machine and operate it according to the specific cutting requirements on materials like steel, stainless steel, iron, or aluminum.
- Ensure that the integral cutting area protections are in place for safety.
TECHNICAL INFO
Stru cture
- electro-welded steel basement
- 3 pneumatic probes ( 3 diameters 5 8 10 mm
- 4 horizontal moving pneumatic clamps
- copy template for standard machining
Cutting unit
- 3 ph electro spindle with adjustable speed through inverter and potentiometer (from 2.800 to 12.000 rpm)
- ferrule + p lier + cutter Ø 8 mm
- automatic worktable pivoting 90° 0° 90°
- longitudinal and transversal graduated ruler with reference stops for position adjustment
- Venturi lubrication system
- machines steel, “inox”, iron and aluminum
Power supply
- Electric power 400 V / 50 Hz
- Motor power 1,5 kW
- Air compressed supply 7 Bar
- Air consumption per cycle 24 Nl
Working area
Safety
- integral cutting area protections
- complies with CE safety regulations as standard
Cutting capcity
General specifications
Optionals
- Lateral stop 1 m
- Plier + cutter Ø 6 / 10 mm
- Allestimento USA-CANADA (normative UL-CSA)
- Autotrasformatore per voltaggio speciale
- Imballaggio per trasporto marittimo
Machine layout
Gemma Group srl
Via Dante Alighieri, 6
47853 Coriano – Rimini – Italy Tel. +39 0541 905811
www.gemma-group.com
email: [email protected]