swirl Quinyo Everlast Stick Vacuum Cleaner Instructions

Operating Instructions

Your safety

Intended use
The appliance is intended for use in private households, not for commercial purposes.
The appliance may only be operated indoors and as per the technical data.
The appliance may only be used with original accessories and spare parts.
Any other use is improper and can lead to personal injuries and property damage.

General safety
Only use the appliance if it is in technically perfect condition.
Warning! Only use the supplied charger to charge the battery.
Do not attempt to repair the appliance yourself. Repairs must only be carried out by the Service department. ………………………… page 29
Never use the appliance without an Easy Bag® and a fine filter.
The following must not be sucked up:

• Substances that are harmful to health, e.g. broken fluorescent lamps
• Hot, incandescent, highly flammable or explosive substances
• Toner dust, ash or building rubble
• Moist or liquid substances
  Disconnect the charger from the power supply before cleaning or maintaining the appliance.
  Disconnect the charger from the power supply if the appliance is left unattended for a long time.

Danger due to electrical current
The charger and the wall charging station must be protected from water and moisture.
A damaged charger or charging cable leads to a risk of an electric shock. Life-threatening risk!

• Immediately disconnect the charger from the socket using a glove or a cloth.
• Do not continue to use the charger; replace it instead.

Danger when handling batteries
Batteries must be protected from heat, e.g. constant exposure to sunlight, water and moisture. Risk of explosion!
If the battery becomes hot, deforms, or vapours or liquid escape, it is defective. Risk of damage to health!

• Immediately remove the battery from the appliance using a thick glove or an oven cloth.
• Immediately rinse skin with water after coming into contact with irritating vapours or fuid.
• Do not continue to use the battery; replace it instead.

Children and other persons
Plastic bags and films must be stored and disposed of out of the reach of children. Risk of suffocation!
The enclosed knife (accessory) must be kept away from children. Risk of injury!
Children must not play with the appliance. Children younger than 8 years of age must be kept away from the appliance.
Children aged 8 years or over and persons with reduced physical, sensory or mental capacities or a lack of experience and knowledge may use the appliance if they are supervised or have been instructed in how to use the appliance safely and understand the resulting risks.

This manual
Please retain the manual.

• If you have any questions or experience problems in operating the appliance, you are sure to find help in the manual. ……. page 28
• If you pass the appliance on, always make sure to enclose the manual.

Hard facts

Technical data

General:

Dimensions a

Battery:

Charger:

a With suction tube and rotary floor nozzle
b On hard floors, with boost function
c With 2in1 upholstery nozzle, without boost function
d With completely discharged battery

Seeing and understanding

Note: Your actual scope of delivery may differ from what is specified here, as optional accessories are available.
Easy Bag®
The secret star

• Contactless bag exchange
• Without dust cloud when emptying
• Simple repurchasing, e.g. using a QR code

A Closure: keeps dust at bay even during exchange ………………………. page 25
B QR code: shows you the quickest way of obtaining a replacement …. page 27

Suction unit

A Handle
B Charging socket: so that you can charge the battery even without a wall charging station
C Battery
Is charged in the appliance …. page 24
D Charging contacts for the wall charging station
E Switch lock: can relieve your index finger when vacuuming for a long time
F On/off switch

Suction unit

A Fine filter holder: there is occasionally something to do here ……….. page 27
B Boost button: increases the suction power and helps to remove stubborn dirt
C Status indicator
With on/off switch pressed:
– Lights up blue: motor running
– Flashes blue: low battery charge
– Does not light up: battery discharged
– Flashes red/blue: Easy Bag® full or fine filter soiled ……………. page 25
– Flashes red: Easy Bag® missing or not inserted correctly …….. page 25
With appliance in the wall charging station:
– First lights up blue and then flashes blue: battery charging
– Constantly lights up blue: battery charged
D Easy Bag® holder:  here, you occasionally exchange the Easy Bag® ………………………. page 25
E Connection for suction tube or nozzle, with power supply for rotary nozzles

Wall charging station

A Exchangeable battery (optional) Is charged ‘intelligently’ …….. page 24
B Charging indicator

• Flashes blue: exchangeable battery charging
• First lights up blue and then goes out: exchangeable battery charged

C Charging socket: for supplying the wall charging station with current …page 24
D Brackets for nozzles
E Charging contacts for the suction unit

Charger
With charging cable

Suction tube

A Release button (also available on some nozzles)

Rotary floor nozzle
With motor-powered, exchangeable roller, for diverse floors and effective dirt removal

A Power supply from the appliance/ suction tube
B Universal roller
With powerful brushes, suitable for carpets and foor tiles
Easily removable …………….. page 25
C LED spotlight

Parquet roller
With soft surface, suitable for sensitive hard foors such as parquet
Easily exchangeable ………… page 25

Crevice nozzle
With narrow tip, for inaccessible corners and tight gaps, e.g. sofa crevices or car door pockets

2 in1 upholstery nozzle
Can be used with brush attachment for coarse, general dirt; can be used without brush attachment for hairs, threads and fluff

A Brush attachment: can be removed after pressing the release button

Rotary upholstery nozzle
(optional)
With motor-powered roller, for upholstery with stubborn dirt and animal hair as well as for mattresses

A Power supply from the appliance/suction tube

Furniture nozzle
(optional)
With particularly soft bristles, suitable for sensitive surfaces, e.g. wooden furniture or keyboards

XXL flexi nozzle
(optional)
Long and flexible, reaches even into narrow spaces that are difficult to access, e.g. behind cupboards or beneath the sofa

XXL flexi tube
(optional)
For extending the suction tube, reaches even remote places, e.g. at ceiling height; unsuitable for rotary nozzles

Accessories
Also included in delivery:

• Plugs and screws for fastening the wall charging station
• Knife for removing threads and hairs in the rotary nozzles

The first time

Before you start
Pleasure comes before work:

• Remove the packaging material, the strips of tape and the protective films from the appliance.

• If possible, retain the original packaging for transport purposes.

• Please dispose of packaging residues in an environmentally friendly manner. …………………………. page 29

• Check that all parts are externally undamaged and that the battery is inserted in the suction unit.

• Push the release buttons together and pull the Easy Bag® holder out of the housing. Check that the Easy Bag® is completely seated on the socket.
  Insert the Easy Bag® holder into the housing until the edge closes.

• To test the function, press the on/off switch and let the appliance run briefly.

Mounting the wall charging station
You need: a drill and bit, a screwdriver, a tape measure – and a little bit of manual skill.

• Look for a suitable place: near to a socket and on a wall that you can drill into.
  Warning! Do not damage any power cables, gas or water pipes when drilling. Risk of personal injuries and property damage!

• Mark the holes for drilling as follows.Note the minimum height for A so that the appliance can be suspended freely together with the suction tube and rotary floor nozzle.

• Note the type of wall:
  – With a brick or concrete wall, you drill holes for the plugs.
  – With a wooden wall, you drill holes directly for the screws.
  – With a plasterboard wall, you may need special plugs.

• Fasten the wall charging station on the wall.

Caution! Do not tighten the screws too much, as the housing can otherwise be damaged.

Connecting the charger

• Plug the charger into the socket.
• Route the charging cable so that it does not run over edges or can be damaged in any other way.
• Connect the charging cable to the charging socket of the wall charging station.

Loading the wall charging station

• Hang the appliance on the wall charging station.
• Insert the exchangeable battery (optional) into the wall charging station at the top. The charging indicator should now light up.
• Hang nozzles that are not needed into the brackets at the bottom of the wall charging station.

Done. Now you can get to work.

Pure routine

Charging the battery
The battery in the suction unit can be charged in various ways:

• When the wall charging station is mounted and the charger is connected, you can simply hang the suction unit on the wall.
• Tip: You can use the appliance without the wall charging station if you want to take it along to your holiday cottage, for instance. The charger can be connected directly to the suction unit. …… page 20

Using the exchangeable battery
The appliance is ready to use virtually without a break thanks to the exchangeable battery (optional). Intelligent charging management in the wall charging station ensures continuous power:
–  When the appliance is hanging on the wall, the battery in the suction unit is charged first and then the battery in the wall charging station.
–  When the appliance is currently in use, the battery in the wall charging station is charged so that it is available for exchanging.

Perfect vacuuming
Vacuuming with this appliance is child’s play.

• Make sure that the battery is charged in good time.

• Select the appropriate nozzle depending on the type of floor, upholstery, furniture or other usage location. ……… page 21

• Tip: You can operate the appliance with or without the suction tube. Simply connect the nozzle directly to the suction unit: hey presto – a compact hand-held vacuum cleaner.

• If you want to keep an eye on the battery status or the suction power while vacuuming, take a look at the status indicator on the suction unit.  ……………….. page 20

• If you want to take a short break, you can carefully lean the appliance – with the suction tube and rotary floor nozzle – against a wall or the edge of a table.
  Attention! Do not position the appliance vertically in the room, as it could fall over.

• After vacuuming, hang the appliance upon the wall charging station so that the battery is recharged.

Cleaning the appliance
Use a soft, moist cloth and a little washing-up liquid to clean the surfaces.
Attention! Strong cleaning agents and abrasive cleaning sponges can damage the surfaces.

Cleaning the rotary floor nozzle or exchanging the roller
The roller in the rotary floor nozzle is easy to remove.

• If you pull the side fap out slightly and turn it down, you can pull the roller out of the housing.
• Stubborn threads and hairs that are wrapped around the roller can be cut off with the knife (accessory).
• Insert the universal roller or the parquet roller depending on the intended use.
• When inserting, make sure that the roller engages in the roller drive and the side flap closes.

Exchanging the Easy Bag®
When the status indicator C flashes red/ blue, first check whether the appliance is blocked with long hair or fluff.

• Remove the nozzle, switch on the appliance with the on/off switch A and briefly press the boost button B to ‘blow out’ the appliance.

If the status indicator C continues to flash, the Easy Bag® should be exchanged:

1. Pull out the Easy Bag® holder•  Press the release buttons together and pull the Easy Bag® holder out of the housing.

2. Eject the full Easy Bag®
   • Pull the eject lever up 1 to 3  times to eject the Easy Bag ®.
   If the Easy Bag® does not come loose, gently shake the Easy Bag® holder.

3. Insert a new Easy Bag® …

• Forcefully spread the Easy Bag ® closure and slip it over the holder fitting.
  Note: The Easy Bag ® then hangs  roughly diagonally beneath the Easy Bag® holder.… and push it up as far as it will go

• Push the Easy Bag® closure completely onto the holder fitting and check that it is located at the very top.

4. Insert the Easy Bag® holder

• Carefully insert the Easy Bag® holder into the housing so that the Easy Bag® is not kinked.

5. Close the housing

• Press the Easy Bag® holder firmly onto the housing so that it engages.

6. Briefly start the motor

• Switch on the appliance with the on/  off switch A and briefly press the boost button B so that the Easy Bag® is seated correctly.

Reordering the Easy Bag®
Order a sufficient Easy Bag® stock in good time.

• Scan the QR code on an Easy Bag® – e.g. with your smartphone.
• Supplies can be ordered very easily in the online shop.

Cleaning/exchanging the fine filter
The fine filter should be cleaned every 3 months and exchanged once a year, or more often if necessary.

•  Press the release buttons together and pull the fine filter holder out of the housing.

• To clean:
  – Carefully tap out the fine filter, preferably straight into the waste bin.

• To exchange:
  –  You can easily order a new fine filter in the online shop.
  –  Loosen the screw using a small Phillips screwdriver. Remove the fine filter.
  –  Insert the new fine filter. Tighten the screw carefully.

• Insert the fine filter holder into the housing until the edge closes.

Help

Can the appliance not be switched

on?.
Is the status indica- for flashing red?

| The Easy Bag° holder is not com- pletely inserted in the suction unit.| Forcefully press the Easy Bag° holder onto the suction unit.
The Easy Bag° is missing, has fallen off or is not pushed completely onto the socket.| Correctly align the Easy Bag° and push it completely onto the socket. page 25
Can the appliance not be switched on?

| The battery is not completely inserted or is discharged.| Pull out the battery and reinsert it again completely; charge the battery if necessary.
The charger is connected directly to the suction unit.| Disconnect the charging cable from the suction unit.
Is the battery not being charged?| The charger is not receiving any current.| Check the socket with another appliance.
Does the charging indicator not light up?| The charging cable is not inserted correctly in the charging socket.| Disconnect and reconnect the charging cable.
The suction unit is not hanging cor- redly on the wall charging station or the charging contacts are soiled.| Check the charging contacts; hang the suction unit correctly in the wall charging station.
The battery is not inserted completely.| Pull out the battery and reinsert it completely.
The battery is defective.| To compare, check whether the exchangeable battery (optional) can be charged.
Is the battery becoming hot?| During charging, the battery can reach a temperature of around 65°C.| If the battery becomes hot, deforms, or vapours or liquid escape: Pull out the battery using a thick glove or an oven cloth.
Is the charger becoming hot?| During charging, the charger can become very hot.| If the charger becomes hot, smells strange or deforms: Disconnect the charger from the socket using a glove or a cloth.
Is the suction power poor?
Is the roller of the rotary floor nozzle not rotating? | The nozzle is not receiving any current from the suction unit.| Connect the nozzle correctly on the suction tube or directly on the suction unit.
The roller is blacked with foreign objects or hairs.| Clean the roller.   page 25
The roller is not correctly inserted in the nozzle.| On insertion, the roller must engage in the roller drive.
Is the roller of the rotary upholstery  nozzle (optional) not rotating?| The nozzle is not receiving any current from the suction unit.| Connect the nozzle correctly on the suction tube or directly on the suction unit.
The roller is blacked with foreign objects or hairs.| Remove the foreign bodies or hairs from the nozzle.
Is the suction power poor?
Is the status indica for flashing red/  blue?| The Easy Bag° is kinked or is twisted on the socket.| Correctly align the Easy Bag° and push it completely onto the socket.   page 25
The Easy Bag° is full.| Exchange the Easy Bags.  page 25
The fine filter is soiled.| Clean the fine filter.   page 27

After the work is done

If you need help, require a spare part or the appliance needs repairing, please ask your retailer who you can turn to. Or contact Swirl® directly:
– Belgium
+32 9 331 52 30
www.swirl.be
– Netherlands
0183 642 642
www.swirl.nl
Transport
Transport the appliance in the original packaging if possible.
Loose parts should not be fastened with adhesive tape or packing tape, because the adhesive residues are very difficult to remove.

Disposal
**** Products marked with this symbol are subject to European Directive 2012 / 19 / EU for waste electrical and electronic equipment (WEEE).
Electrical appliances and batteries do not belong in household waste. Dispose of the appliance in an environmentally friendly manner and via suitable collection systems depending on type:
– The suction unit, battery, wall charging station, charger and rotary nozzles are electronic scrap.
– The suction tube and ‘normal’ nozzles can also be disposed of as bulky waste.
– Batteries can also be disposed of via retailers.
– The packaging consists of environmentally friendly materials and is recyclable.

Swirl®
Wolf PVG GmbH & Co. KG
Ringstr. 99
32427 Minden
Germany
www.swirl.de
® Registered trademark of a company of the Melitta Group Editorial department:
ZINDEL AG
www.zindel.de

References

• Swirl - Just Swirl®, it's simpler.
• ZINDEL AG - Home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>