Q-see Hestia 3T Camera Instruction Manual
- June 9, 2024
- Q-see
Table of Contents
Q-see Hestia 3T Camera
Congratulations !
Your security camera is ready to use.
Thank you for choosing Qsee as your security partner.
Want to know more about Qsee products?
What’s Included
NOTE: -After unboxing, check that the console
is intact and fully equipped.
Get to know your camera
Specification
Connection Set-Up
Connect the Micro USB port and power adapter of 5V/1A, on the back of the camera with a data cable and plug in the power.
Indicator Light
Install Qsee APP
Scan the below QR code or go to App store to download and install “QSEE-Smart
Home” App with icon .Control your device and interact it with other smart
home devices in Qsee app.
Device Connection
Add your device! Here you go!!
-
Click “+”
-
Select “Home Camera”.
-
Enter your connected WiFi password (only 2.4GHz WiFi is supported), and then click “Next”.
Device Reset, Follow the APP Instructions -
Use the camera lens to scan for QR code from the App, wait for the beep sound and click “next”
Enter the connection page and wait for the connection to succeed.
After connection successfully, you can set the name of the camera and click “Add”.
App will jump to home page to complete the camera connection.
FAQ’s
If you encounter any troubles in product information, product installation and
use, please email us at support@q-see.com or refer us to
our website http://www.q-see.com/
Give us your feedback
Qsee strive for a high-quality product and user experience, we’re eager to
hear your feedback or suggestions. Send your feedback through the app or Email
at support@qsee.com.
Notification of Compliance
FCC Statement
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference , and
- this device may accept any interference received, including interference that may cause undesired operation.
NOTE:- This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
CE EU declaration of conformity
Qsee declares that this device in compliance with the essential requirements
and other relevant provisions of directive 2014/53/EU.
IC Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Warranty
This product comes with a 2 year warranty, under certain conditions. Learn
more : https://q-see/pages/replacement-and-warranty-contents.
NOTE:- If you are not satisfied with the new Qsee product purchase, we
suggest you to reset the camera and return it under specific conditions.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>