BOSCH GBR 14 CA Diamond Cup Wheel Best for Turbo Instruction Manual
- June 13, 2024
- Bosch
Table of Contents
**BOSCH GBR 14 CA Diamond Cup Wheel Best for Turbo Instruction Manual
**
Safety instructions for diamond grinding heads
- Please strictly observe the safety instructions for the power tool used.
- Pull the plug out of the socket before carrying out any work on the power tool.
- Work only with the dust extraction guard suitable for the power tool used and ensure that it is connected to a suitable vacuum cleaner.
- Diamond grinding heads may only be used for dry applications.
- Choose a diamond grinding head suitable for the material to be worked. Please take note of the instructions regarding materials on the packaging.
- Before assembly, clean the clamping set, spindle and diamond grinding head.
- Pay attention to the dimensions of the diamond grinding head. The diameter of the hole must match that of the mounting flange. Do not use reducers or adapters. The bore in the diamond grinding head must not be extended.
- The permitted maximum speed of the diamond grinding head must match at least the maximum speed of the power tool.
- Check the diamond grinding head before using it. The diamond grinding head must be fitted properly and be able to rotate freely. Carry out a test run for at least 30 seconds with no load. Do not use diamond grinding heads which are damaged, run untrue or vibrate during use.
- Always wear protective goggles, hearing protection, a dust mask, protective gloves and sturdy shoes while working. If necessary, also wear an apron.
- Remove the diamond grinding head before transporting the power tool to avoid damage.
- To obtain the best working results, grind only with low pressure; do not tilt, knock, or penetrate the material.
- Diamond grinding heads can get very hot during work; do not touch them until they have cooled down.
- Only place the power tool down when the diamond grinding head has come to a complete stop.
- Use the two-hole spanner to tighten and loosen the clamping nut 3 607 950 017.
- Observe valid national and international standards.
1 609 92A 7TU | (07.06.2022) Bosch Power Tools
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
References
Read User Manual Online (PDF format)
Loading......