MOTION CMD-02 Li-ion Battery Powered Tubular Motors with Remote Instruction Manual

MOTION CMD-02 Li-ion Battery Powered Tubular Motors with Remote

Product Information

• FCC Manual FCC ID: ZY4CMD02
• Frequency Range : 433 MHz
• RF Power: (not specified)

Product Usage Instructions

This product is designed to be used with approved antennas only. It does not contain any user serviceable components. Any changes or modifications to the product will invalidate all applicable regulatory certifications and approvals.

FCC Information for User

This device complies with part 15 of the FCC Rules. It must not cause harmful interference and must accept any interference received, including interference that may cause undesired operation.

FCC Radio Frequency Interference Statement

If you experience interference, please consider the following actions:

• Reorient or relocate the receiving antenna.
• Increase the distance separating the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

EU Declaration

This product, type CMD-02, is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity can be found at www.my.coulisse.com.

**Motor features

**

real- time response

Control options

Support

• Video How to instal l, program and operate rtube.nl / red1334
• App Store Download the MOTION app rtube.nl / red981
• Google Play Download the MOTION app rtube.nl/ red982

WARNING: Read the instructions carefully before assembling and using the product. Assembly can be completed by non­professionals. For indoor use only.

• Young children can strangle themselves  with   the   loop of pull cords , chains and tapes, and cords that operate window coverings.
•  To avoid strangulation and entanglement, keep cords out of reach of young children.
• Cords may ensnare a child’s neck .
• Move beds, cots and furniture away from window covering cords.
• Do not tie cords t oget her.
• Make sure cords do not twist together and form a

**Cleaning

**

Follow these general rules when cleaning the outside of t he device and its components:

• Use a damp, soft, lint-free clo t Avoid getting moisture in openings.
• Do not use aerosol sprays, solvents, alcoho l, or abrasives.

Service & Support
Do not perform repairs yoursel f. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside

Warranty Service
First follow the advice in this manual. If the product appears to be damaged or does not function properly, go to your local dealer for instru ct ions on how to obtain warranty service.

Recycle
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collec-tion systems or contact the retailer where the product was purch ased.They can take this product for environmenta l safe recycling.

Important Safety instructions

WARNING :To reduce th e risk of severe injury or death, it is important to follow these instruct ionsfor personal safety. Save these instruct ions.

• Read and follow all installation instruct i
• This appliancecan be used by children aged 8 years and above and persons with reduced physical, sensory or mental capab ilities or lack of experience and knowledge if they have been given supervision or instruct ion concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be performed by unsupervised children.
• Do not allow ch ildren to play with fixed contro ls.
• Keep remote controls away from children.
• Frequently examine the installation for imbalance and signs of wear or damage to cables and springs. Do not use if repair or adjustment is necessary.
• This instruction manual is also availableon the website.
• The drive must be disconnected from its power source during cleaning,maintenanceand when replacing
• The A-weighted emission sound pressure level of the drive is equal to or less th an 7OdB(A).
• Indoor and household use
• Disconnect the drive from the power supply or switch off the automatic cont rols when maintenance, such as window cleaning,is being carried out in the vicinity.
• When operating a biased switch, make sure that other persons are kept away.
• Do not operate when maintenance, such as window cleaning,is being car ried out in the vicinity.
• The tube motor must only be supplied with safety extra low voltagecorrespond ing to the marking on the appliance.
• This appliance contains batteries that are non­ rep laceable.

Important Installation instructions

WARNING : Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.

• This motor can only be used with soft material for driven
• Hazardous unprotected moving parts of the drive must be installed higher than 2.5m above the floor or any other level surfacethat could provide access to
• Install the actuating member of a manual release at a height of less than 1.8m.
• The actuating member of a biasedswitch is to be located within direct sight of the driven part but away from moving parts. It is to be installed at a minimum height of 5m and not acces sible to the public.
• The mass and the dimension of the driven part must be compatible with the rated torque and rated operating time.
• Fixed contro ls have to be clearly visible after installation.
• The driven part must be compatible with the rated torque (O.3N.m) and rated operating time (6min).
• Minimum tube diameter:
• The drive is intended to be installed at a height of at least 5m above floor or any other acces sible level surface.
• All-pole disconnection switches must be incorporated in the fixed wiring in accordance with the wiring rules.
• The appliancemust only be supplied at safety extra low voltage corresponding to the marking on the appliance.
• Before installing the drive, remove any unnecessary cords or components and disable any equipment not needed for powered operation.
• The battery must be removed from the appliance before it is scrapped. The appliance must be disconnected from the supply mains when removing the battery. The battery is to be disposed of safely.

2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.my.coulisse.com

1. Activate the motor
   Activate the motor by moving the switch to 1.

2. 

3. 4. 5. 

4. Pair a remote
   

   • Shortly press the program button with a pin on the motor. The blind will start stepping, indicating that program mode has been activated. (The blind keeps stepping until the program mode is deactivated.)
   • Press the pair button on the back of the remote control to pair the blind. The blind will shortly stop stepping indicating that the remote has been paired to the blind.
   • Repeat steps 6.1 – 6.2 to remove a blind from a channel.  
   • End limits must be programmed to use a blind properly and to prevent it from being damaged.Proceed

5. Check rotational direction
   WARNING : risk of damage. Stop the blind before reaching the end positions.

   • Shortly press the down button to check if the blind unrolls the right way. If the blind moves up, the rotational direction must be changed.
   • Simultaneously press the up and down button LJ to change the rotational direction. ****

6. Set bottom position
   

   • Press and hold the down button until the blind reaches the desired bottom position.
     

   • WARNING : risk of damage. Slowly approach the bottom position.

7. Simultaneously hold the centre and the up  button until the blind stops stepping and starts stepping again. The bottom position has been saved. 

8. Set top position

   • Press and hold the up button until the blind reaches the desired top position.
   • WARNING : risk of damage. Slowly approach the top position. ****

9. Simultaneously hold the centre and the down button until the blind stops stepping and starts stepping again. The top position has been saved.

10. Set favourite position
    {optional)

    • Move the blind to a desired favourite position.
    • Hold the centre button to save this favourite  position. The blind shortly stops stepping, indicating the favourite position has been saved.

11. Deactivate program mode

    • Shortly press the program button to deactivate  program mode with a pin. The blind stops stepping and can be operated.

12. Operate the blind

    • Remote control: Press the up or down button to operate the blind. Press the centre button to stop the blind.

13. Move to favourite position

    • Remote control : press the centre button to move the blind to the favourite position.

14. Reset favourite position

15. Move the blind to a desired favourite position.

16. Press the program button on the motor to activate program mode. The blind starts stepping.

17. Hold the centre button to save this favourite position. The blind shortly stops stepping, indicating the favourite position has been saved succesfully.

18. Press the program button on the motor to deactivate program mode. The blind stops stepping.

19. Reset the blind

20. It is possible to only delete end limits or to do a factory reset. Factory reset will delete the end limits and remove the connection to any paired remote.

  * Shortly press the program button on the motor to activate program mode.
    *  **Delete end limits:** to delete the end limits of the blind, hold the program button until the blind stops stepping for the first time, and keep holding the button until the blind stops stepping for the second time. (approximately 10 seconds)
    *  **Factory reset:** to reset the blind to factory defaults, hold the button for at least 20 seconds. The blind wil stop stepping twice. After the second stop, the blind will give one extra step to confirm factory reset.

18. Recharge the battery
    Use a micro USB cable to charge the motor.

Frequently Asked Questions

Blind does not work.

| Motor is not activated| Activate the motor. See step 1.
Motor battery is empty.| Charge the motor. See step 18.
Remote battery is empty. (LEDS of remote are flashing rapidly.)| Replace the battery in the remote. See the manual of the remote.
Remote battery is inserted incorrectly.| Replace the battery in the remote. See the manual of the remote.
Radio-frequency interference| Make sure that the antenna of the motor is out of the way of metal objects.
The distance from the remote to the motor is too far.| Move closer to the motor.
The remote is not connected to the blind.| Pair the remote with the motor. See step 6.
Motor LED flashes red.| The battery of the motor is empty.| Charge the motor. See step 19.
Blind is not charging.| Charger is not plugged in or does not work.| Try a different charger or make sure the charger is plugged in the outlet.
Blind moves in small steps.| No end limits are programmed.| Program end limits. See step 8 – 11.
Favourite position can not be programmed.| No end limits are programmed.| Program end limits . See step 8 – 11.
Blind lowers too far.| End limits are programmed incorrectly.| Reprogram end limits. See step 8-11.
Blind moves in the opposite direction| The rotational direction has been set incorrectly.| Change the rotational direction. See step 7
The blind keeps moving up and down.| The blind is in program mode.| Press the program button on the motor to exit program mode.

FCC Manual

FCC ID: ZY4CMD02

Regulatory Information

FCC Information for User
This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals.

FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired

FCC Radio Frequency Interference statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct the interference at their own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the distance separating the equipment and receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.

EU Declaration
Hereby, Coulisse declares that the radio equipment type CMD-02 is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.my.coulisse.com

• Frequency range : 433 MHz,
• RF power: <3 dBm

EU Declaration
Hereby, Coulisse declares that the radio equipment type CMD-02 is in compliance whith directive

Disclaimer:

Copyright Coulisse
For the latest information and updated manuals, visit rtube.nl/cmd-02

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher. Although this manual has been composed with the utmost care, Coulisse B.V. does not accept any responsibility for damage due to mistakes and/or faults in this manual.

Coulisse 8.V. reserves the right to revise the manual and to revise and/or change its content at any time, without obligation to notify any person or entity of such revisions or changes. The most recent version replaces older versions of  this manual. The most recent version is available at my.coulisse.com or by contacting your Coulisse contact person. We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>