Shenzhen Hairuichuang Technology X1 Pro Smartwatch User Guide

Shenzhen Hairuichuang Technology X1 Pro Smartwatch

Product Information

• Model: X1/X1Pro
• Charging voltage: 5V
• Screen Size: 1.39 inch
• Charging time: 2.5 hours
• Battery capacity: 300 mAh
• Battery life: 5 days
• Product Usage Instructions

Control Your Watch

• Function Button:
  • Press: Wake the screen, return to the home screen, pause/resume the sport, enter the menu interface.
• Sport Button:
  • Press: Wake the screen.
  • Hold: Power on/off the watch, reboot the watch, reset the watch. Long press for 10-12 seconds to force restart. Enter/Exit the sport interface.
• Touch Screen:
  • Hold the home screen to change the watch face.
  • Swipe to go to different interfaces.
  • Tap to enter the function.
  • Swipe the screen to the right to return to the previous interface.
• Note: The distance between the mobile phone and the watch should be kept less than 10 meters. Please refresh the interface of the APP if disconnection occurs.
• Using Your Watch
  • Charging: Before using your X1/X1Pro for the first time, charge the battery to its full capacity. It is recommended to use a conventional charger above 5V for charging, not the USB interface at the computer terminal.
  • Install Infowear App on your smartphone: You can download Infowear App from Apple Store/Google Play or scan the QR codes provided to download.
  • Device Binding:
  • Turn on the Bluetooth of your phone.
  • Open the Infowear App.
  • Go to the Device page and tap “Click to add your device”.
  • Tap and scan the QR code on the watch to pair.
  • Note: Only when your watch is connected to the Infowear App, the App is running on your phone, and Notification Alerts is enabled in the app, will messages be notified.
  • After the binding is completed:
  • Select the desired language of the watch.
  • Scan the QR code provided and follow the video instructions to connect the watch.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SPECIFICATION

• Model: X1/X1Pro
• Charging voltage: 5V
• Screen Size: 1.39 inch
• Charging time: 2.5 hours
• Battery capacity: 300 mAh
• Battery life: 5 days
• Waterproof: 10M
• Bluetooth version: BLE 5.3
• Screen material: BOE Glass
• Strap width: 22 mm
• Operating temperature: -10℃-40℃

Control Your Watch

Function Button

Press

• Wake the screen
• Return to the home screen
• Pause/resume the sport
• Enter the menu interface

Hold

• Power on / off the watch
• Reboot the watch
• Reset the watch
• Long press 10-12S to force restart

Sport Button

Press

• Wake the screen
• Enter/Exit the sport interface

Touch Screen

• Hold the home screen to change the watch face
• Swipe to go to different interfaces
• Swipe the screen to the right to return to the previous interface

Note:
The distance between the mobile phone and the watch shall be kept less than 10 meters please. And please refresh the interface of the APP if disconnection.

Using Your Watch

Charging
Before using your X1/X1Pro for the first time, charge the battery to its full capacity. It is recommended to use a conventional charger above 5V for charging, not the USB interface at the computer terminal.

• Place the magnetic charger on the magnetic charging points of the watch.
• While your watch is charging, the screen will show its progress.
• Once the battery is fully charged, remove the charger.

Install Infowear App on your smartphone
You can download Infowear App from Apple Store/Google Play or scan the QR codes left to download

Device Binding

1. Turn on the Bluetooth of your phone
2. Open the Infowear App Go to the “Device”page and tap “Click to add your device”
3. tap “ ”and scan the QR code on the watch to pair
4. After the binding is completed,Select the desired language of the watch

Note:
Only when your watch is connected to the Infowear App, the App is running on your phone, and “Notification Alerts” is enabled in the app, will messages be notified.

Settings

• Brightness
  You can set the watch brightness.

• Ringtone vibration
  You can set the vibration level to get an alert of any notification. You can also choose to put the watch on silent mode.

• Wrist awake
  Turn on the wrist awake and set the auto screen offas per your preference.

• Bright screen time out
  You can set the bright screen time out as per yourpreference.

• DND
  You can set the DND duration the watch. Feed-inthe start and end time an

• Menu view
  You can set the Main menu as per your preference.

• About calls
  Follow the onscreen instructions to set or remove theBluetooth call connectivity.

• Device information
  You will find all the information related to the device here, including device name, Bluetooth name and version.

• QR code
  Scan the QR code to connect with the app.

• Reboot
  You can choose to Reboot to restart the watch.

• Power off
  You can choose to power off to restart the watch.

• Reset
  You can choose to reset. Do note if you choose to reset, all your data and settings will be erased.
  

FCC

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>