JIANGMEN ALLRED LIGHTING TECHNOLOGY GLS01 Camping Light Wireless Speaker Instructions
- June 13, 2024
- JIANGMEN ALLRED LIGHTING TECHNOLOGY
Table of Contents
JIANGMEN ALLRED LIGHTING TECHNOLOGY GLS01 Camping Light Wireless Speaker
Instructions
Camping light Wireless Speaker instructions
Packing list
Product Specifications
Bluetooth version : V5.0
Communication distance : 10M
Music time: 12H(50% volume)
Speaker : 52mm 4 10W*2
Charging time : 5.5H
Battery capacity : 10000mAh/3.7V
Charging voltage: DC4.7~5.5V
Rated power : 20W
Function key description
➀ Switching key
Long press 3 seconds to turn on/off
Power on (after power on, first time use or no device connection automatically
enters pairing mode)
Short press: answer/end call, play/pause music
➁ Volume keys –
Long press the volume key – : turn down the volume
Short press the volume key – : switch the previous song
➂ Mode button
Bluetooth/TF card/AUX switching/TWS pairing
Short press mode switch
Long press 2 devices at the same time TWS pairing (before connecting any
devices)
➃ Illuminated light button
Short press: open
Short press to switch between three modes/levels
Short press the fourth time to turn off
Long press for 8 seconds to reset and shut down
➄ Color light button
Short press: turn on the breathing light
Long press: close the breathing light
In any state short press to open the cycle of color light breathing light, in
short press to change to monochrome breathing light mode, continue to short
press to restore the cycle mode, long press to close the breathing light
➅ Volume button +
Long press the volume key +: turn up the volume
Short press the volume keys +: switch the next song
Product diagram
Audio LED indicator status
| Charging | Red light flashing |
|---|---|
| Bluetooth connection / TF card / AUX input | Blue light is always on |
| Volume plus / previous song | White light long light 15 seconds off |
Power on / mode / light button
Volume down / next song
Fully charged| Charging full charge red light is always on
Start up| Blue light blinking
Shutdown| Blue light out
Matching search status| Blue light blinking
Voice Prompt
| Incoming call | Follow the phone |
|---|---|
| Connection with cell phone | Connected |
| Low battery (less than 15% battery) | Ticking sound |
| Answering | No beep |
| Maximum volume | Beep |
| Turn on the phone | Power on |
| Pairing | Ding Dong |
| End the call | No beep |
| Turn off the phone | Power off |
| Volume up / down | No beep |
| AUX / TF / Bluetooth mode | Linein/music/Bluetooth mode |
Tips
- Do not attempt to disassemble or replace any parts inside the product except for the operation method specifically indicated in the manual.
- Do not put the product into water or any other liquid, this product is not designed to be waterproof.
- If any liquid accidentally enters the product, please immediately disconnect and remove the product.
- To avoid electric shock, please make sure there is no water on your hands when installing or uninstalling the product.
- Do not place this product near a heat source or expose it directly to a fire source.
- Do not place this product in an environment where there is a strona electromaanetic force, as this may cause the product to malfunction.
- It is recommended not to operate the device while it is charging.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>