ErgoRelax ER201A Leg Massager User Guide

June 13, 2024
ErgoRelax

ErgoRelax ER201A Leg Massager User **Guide


**

Product Brief Introduction

This leg massager can be used anywhere indoors or outdoors. It can promote blood circulation and relieve muscle soreness by air compression/hot/vibration massage.
A variety of massage modes are available for you to choose from and are suitable for different people.
If you want to wear two legs at the same time, you can buy 2pcs of leg massager. This will massage both your legs at the same time.

Product Parts

  1. Control box
  2. Legwrap
  3. Extension wrap

Note: When the legwrap is too short to wrap your legs, you can use the extension wrap toincrease the width of the wrap to meet your use.

Massage Positions

Calves
Massage Positions
Legs
Massage Positions

Installation

Check the label on your leg massager, marking “left” for use on the left leg and “right” for use on the right leg.
Installation

Put your leg on This vertical line faces the front of your calf
Installation

Don’t wrap too tight The control box faces the outside of your calf
Installation

Touching the power button 2-3 sec.
Installation

How to Use This Leg Massager?

  1. Check the label on your leg massager, marking “left” for use on the left leg and “right” for use on the right leg.
  2. Put on the leg on the correct wrap, recommend leaving a gap available to 4 fingersinit.
  3. Touching the power button for 2-3 sec, and choose the mode, intensity, and heat level you like.

Tips: 1.If you buy the left leg, tie the wrap to the left leg which marked “Left” . If you buy the right leg, tie the wrap to the right leg which marked “Right”: 2.Please note that making the control box “LOCK” button facing up and the control box to the outside of the leg position so that the control box will not affect your leg activities.

Buttons & Operation

Buttons & Operation

A. Power Button

Touching this button 2-3sec to power on and start GENTLE mode. However, you can also change it by using my favorite function in the APP.

  1. If you want to power off, touch this button for 3 seconds.
  2. If you want to pause your massage, touch it lightly. The letter “P” will show on the screen, and it will flash. Continue to massage, and touch it again.
  3. Auto shut down after 20 minutes, but you can change your massage time in ErgoRelax APP

B. Vibration Intensity Button

Touch this button to change the vibration intensity, it is switched in the order “L1-L2-L3-OFF”

C. Mode Button

Touch this button to change the massage mode, It is switched in the order “Gentle-Relax-Vigorous-Exercise”.
Gentle: more soothing and soft, infiatable strength will be lighter, suitable for people who are more sensitive to the strength.
Relax: relax the muscles, relieve soreness, and moderate strength.
Vigorous: more powerful massage, massage strength is more powerful, suitable for people who like an intense massage.
Exercise: relieve muscle fatigue after exercise, promote blood circulation, suitable for people who love sports.

Note:
If you feel powerful or uncomfortable, here are some solutions for your better reference. 01-Choose “Gentle” mode. 02-Itis recommended to leave a gap available to put 4 fingersinit. Please refer to the below picture.

D. Heating Button

Touch this button to change the heating temperature, it is switched in the order “L1-L2-OFF”

E: Lock Button

Pressing this button disables the functions of the other buttons, besides the power button. This is to prevent the buttons from being touched by mistake and changing your massage program.
Note:

  1. When the button is locked, the screen doesn’t show any information
  2. You can press the lock button again to unlock it, or touch the power button 2-3sec to power it off

APP

To provide more intelligent and convenient operations, ErgoRelax developed an APP for you. More functions will be added afterward.

Note:

  1. Search “ErgoRelax” in App Store or in Google Play to download the app
  2. Togive you a better experience, the app may be updated in the future and its appearance may differ from version to version
  3. Before using the app, make sure your mobile’s Bluetooth is turned on and the device is powered on

Step 1:Register your account ‘with your email address.

Step 2: Log in to your account.

Step 3: Add your massage products.

Step 4:Choose the product you buy (Left/Right leg or both legs).

Step 5: Connect Blu etooth and select your product Bluetooth number (ERXXXXXXXX).

Step 6: Click on any mode you want tomassage.

Step 7: Click “my favorite™ mode.
APP Instruction

Step 8: Drag your favorite mode nto the box.
APP Instruction

Note

  1. If you buy both the left leg and the right leg massager, you can choose the ‘both legs’ option so that you can use the app to control your two legs’ massager at the same time conveniently. Of course, you can also add your left leg or right leg separately in the usual way.
  2. 1f you only buy the left leg or right leg massager, please only add the ‘left’ or ‘right’ option, do not choose both legs. Otherwise, you can not add the device.
  3. Please check whether the Bluetooth number you connect is the same as the Bluetooth number sewn or affixed to the product.

Charger

Please charge first when you use it for the first time

Can’t use the leg massager when charging. It’s charged by a 5V/1A adapter, safe and reliable. You can use your cellphone charger or other USB charger.

A. When the battery is low, the blue or red indicator light flashes to remind you tochargeintime.
B. Use the DC 5V adapter to connect one end of the product and the other to the power supply to start charging.
C. When charging, the blue indicator light breaths, and the blue indicator light goes out after the battery is full.

Maintenance

When cleaning the product,the leg wraps should not be removed from the control box.

A. Dust on the leg wraps of the product should be removed with a vacuum cleaner without beating it;
B. Surface dirt can be removed with a cleanrag.
C. For deep dirt, moisten a rag with a neutral detergent and act lightly.
D. Do not let water into the product.
E. Setasidetodry.

After use, do not placeit indirect sunlight or a damp place. Ifitis not used fora long time, after removing the dirt, cover it with a cloth, and keep it clean.

Diagnosis

This chapter lists the most common questions about this product. If you cannot find the answer to your question, please contact our services through the Ergo Relax app.

Situation Reason Solution
The screen does not display any information. You may have pressed the lock
button. Press the lock button again. The screen will display the information.
The button istouched but does not work. You may have pressed the lock
button. Press the lock button again. The screen will display the information.
No power Please charge it.
Unable to power on Overheat protection Power it off for 30 minutes then use

it
No power| Please charge it.
Stop working while using the product| Overheat protection, automatic stop| Power it off for 30 minutes then use it
The default time of automatic massage is 20 minutes| Restart the massageor change your massage time by APP
Feel powerful or uncomfortable| Wrap your legs too tight| 1. Choose “Gentle” mode2. Open the Velcro3. Press the POWER button to turn off
Can’t feel the heat/Heat function is weak| Maybe choose the low temperature| Please choose the high temperature
| Maybe use it for just 1-2 minutes| Please use it about 4-6 minutes
Unable to connect to Bluetooth| You may not turn on the phone’s Bluetoothreconnect it| Please turn on thephone’s Bluetooth, or disconnect the phone’s Bluetooth and then
| The massager is not turned on.| Turn on the massager
| Bluetooth device is not nearby| Please keep the device within a valid Bluetooth distance of 3 meters

Important Safety Instruction

  1. If any of the following apply to you, please consult a doctor before use: Pregnant women, children, or the elderly
    • People who suffer from skin infections or have redness and bum on the skin
    • People who use a pacemaker or similar implantable medical device
    • Patients with heart disease or malignant tumors
    • People who are receiving medical treatment or feel discomfort
    • People suffering from osteoporosis
    • People with high blood pressure or abnormal blood pressure
  2. This product should not be used for any medical purposes. It is designed for personal and non-professional use only.
  3. Do not use spare parts that are not approved by the manufacturer.
    • Non-professional repair personnel should not dismantle or replace the parts of the leg massager without permission.
    • Do not use or store the product in a place with humidity or high temperature.
    • Stop using itimmediately if any adverse reactions occur.
    • Stop using it immediately and cut off the power if the product becomes extremely hot or the product begins to smell or emit an odor.

Warning:

Note:
This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, thereis no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form.

RF exposure:
The device has been evaluated to meet general RF exposure requirement.

Specifications

Product Name Leg Massager
Model No ER201A
Dimensions 636 (L1)/520 (L2)*330 (H)mm
Charging Voltage 5V
Battery Capacity 3000mAh
Storage Condition -20-60 °C/ 30-85%RH
Usage Condition 10-40 °C/ 30-85%RH

Packing List

Leg & foot wraps 1pcs
Handheld controller 1pcs
1 pcs

User manual
Charger| 1pcs
|
Storage Bag| 1 pcs

Search”ErgoRelax” in App Store or Google Play to download the app.

IOS App
QR Code
Android App
QR Code

Contact Us:

 ErgoRelax App
 support@ergorelax.com
 www.ergorelax.com

ErgoRelax Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals