BOSCH KIR81EDD0-01 Refrigerator Instructions
- June 13, 2024
- Bosch
Table of Contents
- KIR81EDD0-01 Refrigerator
- ****Safety
- Preventing material damage
- Environmental protection and saving energy
- Installation and connection
- Familiarising yourself with your appliance
- Features
- Basic operation
- Additional functions
- Alarm
- Refrigerator compartment
- Defrosting
- Cleaning and servicing
- Troubleshooting
- Storage and disposal
- Customer Service
- Technical data
- Documents / Resources
Refrigerator
KIR81A..
Information for Use
KIR81EDD0-01 Refrigerator
Register
your new device on MyBosch now and get free benefits: bosch-
home.com/welcome
Further information and explanations are available online:
****Safety
Observe the following safety instructions.
1.1 General information
- Read this instruction manual carefully.
- Keep the instruction manual and the product information safe for future reference or for the next owner.
- Do not connect the appliance if it has been damaged in transit.
1.2 Intended use
This appliance is only intended to be fully fitted in a kitchen.
Only use this appliance:
- For chilling food.
- in private households and in enclosed spaces in a domestic environment.
- Up to an altitude of 2000 m above sea level.
1.3 Restriction on user group
This appliance may be used by children aged 8 or over and by people who have
reduced physical, sensory or mental abilities or inadequate experience and/or
knowledge, provided that they are supervised or have been instructed on how to
use the appliance safely and have understood the resulting dangers.
Do not let children play with the appliance.
Cleaning and user maintenance must not be performed by children unless they
are being supervised.
Children above the age of three years old and younger than eight years old may
load and unload the the fridge-freezer.
1.4 Safe transport
WARNING ‒ Risk of injury!
The high weight of the appliance may result in injury when lifted.
▶ Do not lift the appliance on your own.
1.5 Safe installation
WARNING ‒ Risk of electric shock!
Incorrect installation is dangerous.
▶ Connect and operate the appliance only in accordance with the specifications
on the rating plate.
▶ Connect the appliance to a power supply with alternating current only via a
properly installed socket with earthing.
▶ The protective conductor system of the domestic electrical installation must
be properly installed.
▶ Never equip the appliance with an external switching device, e.g. a timer or
remote control.
▶ When the appliance is installed, the mains plug of the power cord must be
freely accessible. If free access is not possible, an isolating switch must be
integrated into the permanent electrical installation according to the
installation regulations.
▶ When installing the appliance, check that the power cable is not trapped or
damaged.
If the insulation of the power cord is damaged, this is dangerous.
▶ Never let the power cord come into contact with heat sources.
WARNING ‒ Risk of explosion!
If the appliance’s ventilation openings are sealed, a leak in the
refrigeration circuit may result in a flammable mixture of gas and air.
▶ Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING ‒ Risk of fire!
It is dangerous to use an extended power cord and non-approved adapters.
▶ Do not use extension cables or multiple socket strips.
▶ Only use adapters and power cords approved by the manufacturer.
▶ If the power cord is too short and a longer one is not available, please
contact an electrician to have the domestic installation adapted.
Portable multiple socket strips or portable power supply units may overheat
and cause a fire.
▶ Do not place portable multiple socket strips or power supply units on the
back of the appliance.
1.6 Safe use
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶ Only use the appliance in enclosed spaces.
▶ Never expose the appliance to intense heat or humidity.
▶ Do not use steam- or high-pressure cleaners to clean the appliance.
WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in
it and suffocate.
▶ Keep packaging material away from children.
▶ Do not let children play with packaging material.
Children may breathe in or swallow small parts, causing them to suffocate.
▶ Keep small parts away from children.
▶ Do not let children play with small parts.
WARNING ‒ Risk of explosion!
If the cooling circuit is damaged, flammable refrigerant may escape and
explode.
▶ To accelerate the defrosting process, do not use any other mechanical
devices or means other than those recommended by the manufacturer.
▶ If food is stuck to the freezer compartment, loosen it with a blunt
implement such as the handle of a wooden spoon.
Products which contain flammable propellants and explosive substances may
explode, e.g. spray cans.
▶ Do not store products which contain flammable propellants (e.g. spray cans)
or explosive substances in the appliance.
WARNING ‒ Risk of fire!
Electrical devices within the appliance may cause a fire, e.g. heaters or
electric ice makers.
▶ Do not operate electrical devices within the appliance.
WARNING ‒ Risk of injury!
Injury to the eyes caused by escaping flammable refrigerant and hazardous
gases.
▶ Do not damage the tubes of the refrigerant circuit or the insulation.
CAUTION ‒ Risk of harm to health!
To prevent food from being contaminated, you must observe the following
instructions.
▶ If the door is open for an extended period of time, this may lead to a
considerable temperature increase in the compartments of the appliance.
▶ Regularly clean the surfaces that may come into contact with food and
accessible drain systems.
▶ Store raw meat and fish in suitable containers in the refrigerator so that
they do not touch or drip on other food.
▶ If the fridge/freezer is empty for an extended period of time, switch off
the appliance, defrost it, clean it and leave the door open to prevent the
formation of mould.
Metal or metal-style parts in the appliance may contain aluminium.
If acidic food comes into contact with aluminium in the appliance, aluminium
foil ions may pass into the food.
▶ Do not consume soiled food.
1.7 Damaged appliance
WARNING ‒ Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous.
▶ Never operate a damaged appliance.
▶ Never pull on the power cord to unplug the appliance. Always unplug the
appliance at the mains.
▶ If the appliance or the power cord is damaged, immediately unplug the power
cord or switch off the fuse in the fuse box.
▶ Call customer services. → Page 25
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out by trained specialist
staff.
▶ Only use genuine spare parts when repairing the appliance.
▶ If the power cord or the appliance power cable of this appliance is damaged,
it must be replaced with a special power cord or special appliance power
cable, which is available from the manufacturer or its Customer Service.
WARNING ‒ Risk of fire!
If the tubes are damaged, flammable refrigerant and harmful gases may
escape and ignite.
▶ Keep naked flames and ignition sources away from the appliance.
▶ Ventilate the room.
▶ Switch off the appliance. → Page 16
▶ Unplug the appliance from the mains or switch off the circuit breaker in the
fuse box.
▶ Call after-sales service. → Page 25
Preventing material damage
ATTENTION!
Using the base, runners or appliance doors as a seat surface or climbing
surface may damage the appliance.
▶ Do not stand or support yourself on the base, runners or doors.
Contamination with oil or fat may cause plastic parts and door seals to become
porous.
▶ Keep plastic parts and door seals free of oil and grease. Metal or metal-
style parts in the appliance may contain aluminium. Aluminium reacts when it
comes into contact with acidic foods.
▶ Do not store unpackaged food in the appliance. If you clean fittings and
accessories in the dishwasher, this may cause them to become deformed or
discolour.
▶ Never clean fittings and accessory in the dishwasher.
Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
▶ Sort the individual components by type and dispose of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use less power.
Selecting the installation location
-
Keep the appliance out of direct sunlight.
-
Install the appliance as far away as possible from heating elements, cookers and other heat sources:
– Maintain a 30 mm clearance to electric or gas cookers.
– Maintain a 300 mm clearance to oil or solid-fuel cookers. -
Never cover or block the external ventilation openings.
Saving energy during use
Note: The arrangement of the fittings does not affect the energy
consumption of the appliance.
- Open the appliance only briefly and then close it carefully.
- Never cover or block the interior ventilation openings or the exterior ventilation openings.
- Transport purchased food in a cool bag and place in the appliance quickly.
- Allow warm food and drinks to cool down before storing them.
- Thaw frozen food in the refrigerator compartment to utilise the low temperature of the food.
- Always leave some space between the food and to the back panel.
Installation and connection
4.1 Scope of delivery
After unpacking all parts, check for any transport damage and for completeness
of delivery. If you have any complaints, contact your dealer or our after-
sales service → Page 25.
The delivery consists of the following:
- Built-in appliance
- Equipment and accessories1
- Installation material
- Installation instructions
- User manual
- Customer service directory
- Warranty enclosure2
- Energy label
- Information on energy consumption and noises
4.2 Criteria for the installation location
WARNING
Risk of explosion!
If the appliance is in a space that is too small, a leak in the refrigeration
circuit may result in a flammable mixture of gas and air.
▶ Only install the appliance in a space with a volume of at least 1 m3 per 8 g
refrigerant. The volume of refrigerant is indicated on the rating plate. →
“Appliance”, Fig. 1 /5 , Page 13
1 Depending on the appliance specifications
2 Not in all countries
The weight of the appliance ex works may be up to 65 kg depending on the
model.
The subfloor must be sufficiently stable to bear the weight of the appliance.
Permitted room temperature
The permitted room temperature depends on the appliance’s climate class.
The climate class can be found on the rating plate. → “Appliance”, Fig. 1 /5,
Page 13
Climate class | Permitted room temperature |
---|---|
SN | 10 °C to 32 °C |
N | 16 °C to 32 °C |
ST | 16 °C to 38 °C |
T | 16 °C to 43 °C |
The appliance is fully functional within the permitted room temperature.
If an appliance with climate class SN is operated at colder room temperatures,
the appliance will not be damaged up to a room temperature of 5 °C.
Niche dimensions
Observe the niche dimensions if you install your appliance in the niche. If
this is not the case, problems may occur when installing the appliance.
Niche depth
Install the appliance in the recommended niche depth of 560 mm. If the
niche depth is smaller, the energy consumption increases slightly. The niche
depth must be a minimum 550 mm.
Niche width
An inside niche width of at least 560 mm is required for the appliance.
Over-and-under and side-by-side installation
If you want to install 2 refrigerating appliances one over the other or side
by side, you must maintain a clearance of at least 150 mm between the
appliances. Selected appliances can be installed without a minimum clearance.
Ask your dealer or kitchen planner about this.
4.3 Installing the appliance
▶ Install the appliance in accordance with the enclosed installation
instructions.
4.4 Preparing the appliance for the first time
- Remove the informative material.
- Remove the protective foil and transit bolts, e.g. remove the adhesive strips and carton.
- Clean the appliance for the first time. → Page 18
4.5 Connecting the appliance to the electricity supply
- Insert the non-heating appliance plug of the power cable into the appliance.
- Insert the mains plug of the appliance’s power cable in a socket nearby. The connection data of the appliance can be found on the rating plate. → “Appliance”, Fig. 1 / 5, Page 13
- Check the mains plug is inserted properly.
The appliance is now ready for use.
Familiarising yourself with your appliance
5.1 Appliance
You can find an overview of the parts of your appliance here.
Note: Deviations between your appliance and the diagrams may differ with
regard to their features and size.
1
1 | Control panel → Page 13 |
---|---|
2 | Bottle shelf → Page 14 |
3 | Storage container → Page 14 |
4 | Fruit and vegetable container with humidity control → Page 14 |
5 | Rating plate → Page 25 |
6 | Butter and cheese compartment → Page 15 |
7 | Door storage compartment for large bottles → Page 15 |
5.2 Control panel
You can use the control panel to configure all functions of your appliance and
to obtain information about the operating status.
2
1 | super switches Super cooling on or off. |
---|---|
2 | > sets the temperature of the refrigerator compartment. |
3 | > lights up when the alarm is switched on. |
4 | Displays the set temperature for the refrigerator compartment in °C. |
5 | ****3 sec. switches the appliance on or off. |
Features
The features of your appliance depend on the model.
6.1 Shelf
To vary the shelf as required, you can remove the shelf and re-insert it
elsewhere.
→ “Removing the shelf”, Page 19
6.2 Variable shelf
Use the variable shelf to store tall items, e.g. cans or bottles, on the shelf
below.
You can remove the front section of the variable shelf and slide it below the
rear part of the shelf.
If more space is required, you can fold up the front and rear section of the variable shelf together.
6.3 Bottle shelf
Store bottles securely on the bottle shelf.
To vary the bottle shelf as required, you can remove the bottle shelf and re-
insert it elsewhere.
→ “Removing the shelf”, Page 19
6.4 Storage container
The temperatures in the storage container are lower than in the refrigerator
compartment. Temperatures below 0 °C may occur occasionally. In order to reach
temperatures close to 0 °C in the storage container, set the refrigerator
compartment temperature to 2 °C. → Page 16
Use the lower temperatures in the storage container to store highly perishable
food, e.g. fish, meat and sausages.
6.5 Fruit and vegetable container with humidity control
Store fresh fruit and vegetables loose in the fruit and vegetable container.
Cover any chopped fruit and vegetables, or store in air-tight packaging. You
can adjust the humidity in the fruit and vegetable container using the
humidity controller. This allows fresh fruit and vegetables to be stored for
longer than with conventional storage.
The air humidity in the fruit and vegetable container can be set according to the type and amount of food to be stored by moving the humidity control:
- Low humidity required when primarily storing fruit or mixed items, or if the appliance is very full.
- High humidity required when primarily storing vegetables or when the appliance is not very full.
Condensation may form in the fruit and vegetable container depending on the
food and quantity stored.
Remove the condensation with a dry cloth and adjust the air humidity to a
lower setting using the humidity controller. To ensure that the quality and
aroma are retained, store fruit and vegetables that are sensitive to cold
outside of the appliance at temperatures of approx. 8 °C to 12 °C, e.g.
pineapple, bananas, citrus fruits, cucumbers, courgettes, peppers, tomatoes
and potatoes.
6.6 Butter and cheese compartment
Store butter and hard cheese in the butter and cheese compartment.
6.7 Door rack
To adjust the door rack as required, you can remove the door rack and re-
insert elsewhere.
→ “Removing door rack”, Page 20
6.8 Variable door rack
To adjust the variable door rack as required, you can move or remove the
variable door rack, and re-insert it elsewhere.
You can remove the door rack rail and re-insert it elsewhere.
→ “Removing the door rack rail”, Page 21
6.9 Accessories
Use original accessories. These have been made especially for your appliance.
The accessories for your appliance depend on the model.
Egg tray
Store eggs safely on the egg tray.
Basic operation
7.1 Switching on the appliance
-
Electrically connect the appliance.
→ Page 11
Note: If the appliance has been previously switched off using the control panel, press and hold 3 sec. for three seconds.
The appliance begins to cool. -
Set the required temperature.
→ Page 16
7.2 Operating tips
- Once you have switched on the appliance, the set temperature is only reached after several hours. Do not put any food in the appliance until the set temperature has been reached.
- When you close the door, a vacuum may be created. The door is then difficult to open again. Wait a moment until the vacuum is offset.
- The temperature in the appliance varies due to the following conditions:
– How often the appliance is opened
– Load capacity
– Temperature of newly stored food
– Ambient temperature
– Direct sunlight
7.3 Switching off the appliance
▶ Press and hold ****3 sec. for three seconds.
7.4 Setting the temperature
Setting the refrigerator compartment temperature
▶ Press > repeatedly until the temperature display shows the required
temperature setting.
The recommended temperature in the refrigerator compartment is 4 °C. → “”OK”
sticker”, Page 17
Additional functions
Additional functions
Find out which additional functions can be used for your appliance.
8.1 Super cooling
With Super cooling, the refrigerator compartment cools as cold as possible.
Switch on Super cooling before placing large quantities of food.
Note: When Super cooling is switched on, increased noise may occur.
Switching on Super cooling
▶ Press super repeatedly until “super” lights up.
Note: After approx. 15 hours, the appliance switches to normal operation.
Switching off Super cooling
▶ Press super repeatedly until the temperature display shows the required
temperature.
Alarm
9.1 Door alarm
If the appliance door is open for a while, the door alarm switches on.
A warning tone sounds and > lights up.
After 10 minutes, the interior lighting flashes.
Switching off the door alarm
▶ Close the appliance door or press >.
****The warning tone is switched off.
Refrigerator compartment
You can keep meat, sausage, fish, dairy products, eggs, prepared meals and
pastries in the refrigerator compartment.
The temperature can be set from 2 °C to 8 °C.
The refrigerator compartment can also be used to store highly perishable foods
in the short to medium term. The lower the selected temperature, the longer
the food remains fresh.
10.1 Tips for storing food in the refrigerator compartment
- Only store food when fresh and undamaged.
- Store food covered or in air-tight packaging.
- To avoid impeding the circulation of air and to prevent food from freezing, do not place food so that it has direct contact with the back wall.
- Allow hot food and drinks to cool down first before placing in the appliance.
- Observe the best-before date or use-by date specified by the manufacturer.
10.2 Chill zones in the refrigerator compartment
The air circulation in the refrigerator compartment creates different chill
zones.
Coldest zone
The coldest zone is between the arrow stamped on the side and the shelf
underneath.
Tip: Store highly perishable food such as fish, sausages and meat in the
coldest zone.
Warmest zone
The warmest zone is at the very top of the door.
Tip: Store food that does not spoil easily in the warmest zone, e.g. hard
cheese and butter. Cheese can then continue to release its aroma and the
butter will still be easy to spread.
10.3 ”OK” sticker
The “OK” sticker lets you check whether the refrigerator compartment reaches
the safe temperature ranges of +4 °C or colder recommended for food.
The “OK” sticker is not included with all models.
If the sticker does not indicate “OK”, gradually reduce the temperature.
→ “Setting the refrigerator compartment temperature”, Page 16
Once the appliance is switched on, it may take up to 12 hours until the set
temperature is reached.
Correct setting
Defrosting
11.1 Defrosting in the refrigerator compartment
When the appliance is operating, condensation droplets or frost form on the
rear panel of the refrigerator compartment due to functional reasons. The back
panel in the refrigerator compartment defrosts automatically.
Condensation runs through the condensation channel into the drainage hole to
the evaporation pan and does not have to be wiped away.
To ensure that the condensation can drain and odours do not form, observe the
following information:
Cleaning the condensation channel and drainage hole → Page 19.
Cleaning and servicing
Cleaning and servicing To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully. Customer Service
must clean inaccessible points. Cleaning by customer service can give rise to
costs.
12.1 Preparing the appliance for cleaning
-
Switch off the appliance.
→ Page 16 -
Disconnect the appliance from the power supply.
Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. -
Take out all of the food and store it in a cool place.
Place ice packs (if available) onto the food. -
If there is a layer of hoarfrost, allow this to defrost.
-
Remove all fittings and accessories from the appliance.
→ Page 19 -
Remove the door rack rail.
→ Page 21
12.2 Cleaning the appliance
WARNING
Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶ Do not use steam- or high-pressure cleaners to clean the appliance.
Liquid in the lighting or in the controls can be dangerous.
▶ The rinsing water must not drip into the lighting or controls.
ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appliance.
▶ Do not use hard scouring pads or cleaning sponges.
▶ Do not use harsh or abrasive detergents.
▶ Do not use cleaning products with a high alcohol content.
If liquid gets into the drainage hole, the evaporation pan may overflow.
▶ The rinsing water must not get into the drainage hole.
If you clean fittings and accessories in the dishwasher, this may cause them
to become deformed or discolour.
▶ Never clean fittings and accessory in the dishwasher.
-
Prepare the appliance for cleaning.
→ Page 18 -
Clean the appliance, the fittings, the accessories and the door seals with a dish cloth, lukewarm water and a little pH-neutral washing-up liquid.
-
Dry thoroughly with a soft, dry cloth.
-
Insert the fittings and install the appliance components.
-
Electrically connect the appliance.
→ Page 11 -
Putting the food into the appliance.
12.3 Cleaning the condensation channel and drainage hole
Regularly clean the condensation channel and drainage hole to ensure that the
condensation can drain.
-
Remove the storage container.
→ Page 20 -
Carefully clean the condensation channel and the drainage hole, e.g. using a cotton bud.
12.4 Removing the fittings
If you want to clean the fittings thoroughly, remove these from your
appliance.
Removing the shelf
▶ Lift the shelf at the front 1, pull it out and remove it 2.
Removing the variable shelf
▶ Tilt both parts of the shelf upwards 1, remove them together 2 and then
remove the rails 3.
Removing door rack
▶ Lift the door rack and remove it.
Removing the storage container
- Pull out the storage container as far as it will go.
- Lift the storage container at the front 1 and remove it 2.
Removing the fruit and vegetable container
Removing the front of the container
You can remove the front of the fruit and vegetable container and frozen
food container to facilitate cleaning.
▶ Press in the snap-in hooks on the side of the container 1 and remove the
front from the container in a turning motion 2.
12.5 Removing appliance components
If you want to clean your appliance thoroughly, you can remove certain
components from your appliance.
Removing the door rack rail
▶ Lift the door rack rail upwards and remove it.
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the
troubleshooting information before contacting after-sales service. This will
avoid unnecessary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out by trained specialist
staff.
▶ Only use genuine spare parts when repairing the appliance.
▶ If the power cord or the appliance power cable of this appliance is damaged,
it must be replaced with a special power cord or special appliance power
cable, which is available from the manufacturer or its Customer Service.
Fault | Cause and troubleshooting |
---|---|
The appliance is not cooling, the displays and lighting are lit. | Showroom |
mode is switched on.
▶ Carry out the appliance self-test. → Page 24
****Once the appliance self-test has ended, the appliance switches to normal
operation.
The LED lighting does not work.| Different causes are possible.
▶ Call customer service.
The customer service number can be found in the enclosed customer service
directory.
The warning tone sounds.
The door alarm is switched on.| The appliance door is open.
▶ Close the appliance door.
The temperature differs greatly from the setting.| Different causes are
possible.
1. Switch off the appliance. → Page 16
2. Switch the appliance back on after five minutes. → Page 16
‒ If the temperature is too warm, check the temperature again after a couple
of hours.
‒ If the temperature is too cold, check the temperature again on the following
day.
The base of the refrigerator compartment is wet.| The condensation channel or
drainage hole are blocked.
▶ Clean the condensation channel and the drainage hole. → Page 19
The appliance hums, bubbles, buzzes, gargles or clicks.| Not a fault. A motor
is running, e.g. refrigerating unit, fan. Refrigerant flows through the pipes.
The motor, switches or solenoid valves are switching on or off.
No action required.
The appliance makes noises.| Fittings wobble or stick.
▶ Check the removable fittings and, if required, replace these.
Bottles or containers are touching.
▶ Move the bottles or containers away from each other.
13.1 Conducting an appliance self-test
Your appliance has an appliance selftest which displays faults that can be
eliminated by your customer service.
-
Switch off the appliance. → Page 16
-
Disconnect the appliance from the power supply.
Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. -
Electrically reconnect the appliance after five minutes. → Page 11
-
Within the first 10 seconds after connecting to the power supply, press and hold for three to five seconds until an audible signal sounds.
If, at the end of the appliance selftest, two audible signals sound and the temperature display indicates the set temperature, your appliance is OK. The appliance switches to normal operation.
If, at the end of the appliance selftest, 5 audible signals sound and the temperature display LEDs light up with a different brightness, inform customer service. The LEDs provide customer service with information about this fault.
Storage and disposal
14.1 Taking the appliance out of operation
-
Switch off the appliance. → Page 16
-
Disconnect the appliance from the power supply.
Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. -
Remove all of the food.
-
Defrost the appliance. → Page 18
-
Clean the appliance. → Page 18
-
To guarantee the ventilation inside the appliance, leave the appliance open.
14.2 Disposing of old appliance
Valuable raw materials can be reused by recycling.
WARNING
Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at
risk.
▶ Leave shelves and containers inside the appliance to prevent children from
climbing in.
▶ Keep children away from the redundant appliance.
WARNING
Risk of fire!
If the tubes are damaged, flammable refrigerant and harmful gases may escape
and ignite.
▶ Do not damage the tubes of the refrigerant circuit or the insulation.
- Unplug the appliance from the mains.
- Cut through the power cord.
- Dispose of the appliance in an environmentally friendly manner.
Information about current disposal methods are available from your specialist dealer or local authority.
**** This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Customer Service
Function-relevant genuine spare parts according to the corresponding Ecodesign
Order can be obtained from Customer Service for a period of at least 10 years
from the date on which your appliance was placed on the market within the
European Economic Area.
Note: Under the terms of the manufacturer’s warranty applicable to the
location, the use of Customer Service is free of charge. The minimum duration
of the warranty (manufacturer’s warranty for private consumers) in the
European Economic Area is 2 years according to the terms of warranty
applicable to the location. The terms of warranty do not affect other rights
or claims held by yourself under local legislation.
Detailed information on the warranty period and terms of warranty in your
country is available from our aftersales service, your retailer or on our
website.
If you contact Customer Service, you will require the product number (ENr.)
and the production number (FD) of your appliance.
The contact details for Customer Service can be found in the enclosed Customer
Service directory or on our website.
15.1 Product number (E-Nr.) and production number (FD)
You can find the product number (ENr.) and the production number (FD) on the
appliance’s rating plate. → “Appliance”, Fig. 1 /5, Page 13 Make a note of
your appliance’s details and the Customer Service telephone number to find
them again quickly.
Technical data
Refrigerant, cubic capacity and further technical specifications can be found
on the rating plate.
→ “Appliance”, Fig. 1 /5, Page 13 This product contains a light source from
energy efficiency class E. The light source is available as a spare part and
should only be replaced by trained specialist staff.
You can find more information about your model online at
https://eprel.ec.europa.eu/ 1. This web address is linked to the
official EU EPREL product database. Please then follow the instructions on
searching for the model. The model identifier is made up of the characters
before the slash in the product number (E-Nr.) on the rating plate. Al-
ternatively, you can also find the model identifier in the first line of the
EU energy label.
1 Only applies to countries in the European Economic Area
Thank you
for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:
- Expert tips & tricks for your appliance
- Warranty extension options
- Discounts for accessories & spare-parts
- Digital manual and all appliance data at hand
- Easy access to Bosch Home Appliances Service
Free and easy registration – also on mobile phones: www.bosch-
home.com/welcome
Looking
for help?
You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair
from Bosch experts.
Find out everything about the many ways Bosch can support you: www.bosch-
home.com/service
Contact data of all countries are listed in the attached service directory.
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
www.bosch-home.com
Valid within Great Britain:
Imported to Great Britain by
BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton, Milton Keynes
MK12 5PT
United Kingdom
A Bosch Company
Documents / Resources
|
BOSCH KIR81EDD0-01
Refrigerator
[pdf] Instructions
KIR81EDD0-01, KIR81A.., KIR81EDD0-01 Refrigerator, Refrigerator
---|---
References
- Home Appliances Global Website | Bosch
- Home Appliances Global Website | Bosch
- Bosch Service | Service worldwide
- Welcome to MyBosch
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>