anybuds 2ASWH-INE INE True Wireless Earphones User Manual
- June 13, 2024
- anybuds
Table of Contents
anybuds 2ASWH-INE INE True Wireless Earphones
Product diagram maticsketch
Packing list
wearing steps
- Step 1: Ensure the earbud tip facing downwards, then place the earbuds into ears.
- Step 2: Rotate earbuds back to auricle side to fit snugly.
Operation of earbuds
How to pair
- Take out the two earbuds from the charging case, they will turn on automatically and will connect each other within 10 seconds.
- The two earbuds flash alternately in red and blue (pairing mode).
- Search for pairing name [anybuds Dots. and select it in your mobile.
Another method of turning on and turning off
Turn on:
Tap and hold the Touch Control on both earbuds for over 3 seconds.
Turn off:
- Touch the Control button 5 seconds will turn off when the earbuds in playless status.
- The earbuds will turn off automatically after it is disconnected for more than 5 minutes.
Reset
If you accidentally get only one earbud work or fail to pair each other,
please reset it:
- Take out two earbuds from the charging compartment, and when the red and blue lights alternate, quickly touch any earbuds 5 times.
- If the red light remains on for a long time and goes out, and the earbuds are turned off, it indicates that the factory settings have been successfully restored.
Note: If there is a prompt indicating an unsuccessful connection on your phone, please delete all Lanybuds Dots] connection records and try connecting again.
Charging
Charging the earbuds
- Put the earbuds into the charging case, they will power off & be charged automatically. When the red LED lights up, it means that the earbuds are being charged from charging case.
- The red light will turn off when the earbuds are fully charged.
Charging the charging case
Please use the 5V/1A adapter to charge the charging case, which can be charged
with a computer USB or other USB interface charger.
Charging warning
Don’t tap the earbuds touch button while in charge, otherwise, it will fail to
pair. Then you should follow the reset to factory settings.
Button operation
Earbuds LED indicator
- Turn on: Blue light flash for one second
- Turn off: Red light flash for one second
- Pairing status: The two earbuds flash red and blue alternately
- Paired with the phone: Non-flashing light
- Charging process: Red lights on
- Fully charged: Red light goes out
Music operation
(Operation in wearing of double earbuds)
Calling control
Voice assistant
NOTE: If you accidentally get only one earbud paired with phone, please
make sure both earbuds have been turned on. (Tap and hold the unpaired earbud
for 3 seconds to turn on). If necessary, please try “Reset” options to restore
to factory settings.
Specification
- Support Bluetooth profile: A2DP, AVRCP, HFP, HSP
- Transmission Distance: ≥12m
- Speaker type: Ф6mm*2
- Impedance: 16Ω
- Earbuds battery capacity: 50mAh
- Charging time of earbuds: ≤1.5 hours
- The battery capacity of charging case: 300mAh
- Charging time of the charging case: ≤1.5 hours
- Weight: 35g
Waterproof
Waterproof for daily use (sweating, rain, washing face, showering, having a
bath, etc, but not for swimming underwater)
Please note that the phone’s Bluetooth signal can not be transmitted underwater.
Warning!
- Do not dismantle or refit the product to avoid malfunction or fire hazards.
- Keep away from corrosive liquids.
- Keep away from extreme ambient temperatures below -10 °C or above 50°C.
- Keep away from children and pets.
- Do not touch the earbuds with sharp objects.
- Do not use the product in thunderstorm weather.
- If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.
- Since the Bluetooth signal cannot be transmitted underwater, swimming, diving will cause the signal disconnected or intermittent.
SPECIAL REMINDER:
Wipe the hardware contacts of the headset and charging box when the headset is
not charging.
Thank you for purchasing the Anybuds authentic product.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>