Hard Head 025441 Step Ladder Instruction Manual

: June 13, 2024
: Hard Head

Table of Contents

Hard Head 025441 Step Ladder
Product Information
Product Usage Instructions
SAFETY INSTRUCTIONS
SYMBOLS
TECHNICAL DATA
USE
MAINTENANCE
INSPECTION
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hard Head 025441 Step Ladder

Hard-Head-025441-Step-Ladder-PRODUCT-IMG

Product Information

The product is a step ladder available in four different models: 025441, 025445, 025450, and 025452. The ladder is designed for private use and is not intended for professional use. It has a maximum load capacity and comes with operating instructions in multiple languages.

The ladder dimensions and weight for each model are as follows:

025441: Height – 1165 mm, Width – 552 mm, Weight – 3.36 kg
025445: Height – 1382 mm, Width – 775 mm, Weight – 3.96 kg
025450: Height – 1602 mm, Width – 990 mm, Weight – 4.58 kg
025452: Height – 1820 mm, Width – 1210 mm, Weight – 5.39 kg

The product meets the requirements of EN 131 standard.

Product Usage Instructions

Inspect the ladder before each use to ensure it is in good condition.
Make sure the folding lock is properly connected.
Wear suitable shoes while using the ladder.
Always face the ladder while using it.
Ensure the ground below the ladder is free from dirt.
Do not use the ladder as a walkway or bridge.
Do not exceed the maximum load capacity.
Do not lean too far forward on the ladder.
Place the ladder on a stable surface.
Check that the ladder is fully unfolded before use.
Do not use the ladder sideways.
Regularly inspect the ladder and check its condition.
Do not use the ladder for commercial purposes.

SAFETY INSTRUCTIONS

Make sure that you are capable of using the stepladder. Some medical conditions and certain medicines, alcohol or drugs may make it unsafe to use the stepladder.
When transporting stepladders on support rails or in a truck, make sure to position them so they cannot be damaged.
Inspect the stepladder after delivery and before using for the first time to check its condition and the functionality of all the parts.
Visually inspect the stepladder for damage and check that it is safe to use each day before using it.
Do not use a damaged stepladder.
Remove any dirt, wet paint, clay, oil or snow, from the stepladder.
Repairs and maintenance work must be carried out at an accredited service centre in accordance with the manufacturer’s instructions.
Only spare parts from the manufacturer must be used.
Do not use stepladders that conduct electricity to do jobs where it is not possible to switch off the power.
Take regular breaks when in use – tiredness can put safety at risk.

SYMBOLS

The following symbols are used in the instructions and/or on the product.

|

Risk of falling.

---|---
|

Read the instructions.

|

Max load.

|

Max number of persons on the stepladder.

---|---
|

Keep a firm grip on the stepladder when climbing up.

|

Do not carry heavy items up the stepladder.

|

Check that the extension lock is correctly connected.

|

Check that the stepladder is fully extended before use.

| Do not use a standing ladder as a leaning ladder if it is not designed for that.
|

Do not overreach.

|

Place the stepladder on a stable surface.

|

Wear suitable footware.

| Never use the ladder if you are under the influence of medicine, alcohol or drugs.
|

Always face the stepladder when using it.

| Check that the surface under the stepladder is free from contamination.
|

Pay attention to overhead power lines when moving the stepladder – risk of electric shock.

---|---

| Avoid work that imposes a side loading, such as side- on drilling through solid materials.
| ****

Do not step off sideways from the stepladder.

|

Check the stepladder before use.

|

Do not use the stepladder as a footbridge.

|

The stepladder is not intended for professional use.

|

The ladder is intended for household use.

TECHNICAL DATA

| | | ****

WEIGHT

---|---|---|---
025441| 1165 mm| 552 mm| 3,36 kg
025445| 1382 mm| 775 mm| 3,96 kg
025450| 1602 mm| 990 mm| 4,58 kg
025452| 1820 mm| 1210 mm| 5,39 kg

The product is approved in accordance with EN 131.

USE

Locks, if available, must be fully locked before use.
The stepladder must be placed on a smooth, level and stable base.
Never move the stepladder from above.
When positioning the stepladder, take into account risk of collision with the ladder, e.g. from pedestrians, vehicles or doors. Lock doors (not emergency exits) and windows in the work area, where possible.
Identify potential risks in the work area, such as high-tension cables or exposure to electrical components.
The stepladder must stand on its feet and not rest on a step.
Do not put the stepladder on slippery surfaces (for example, ice, shiny surfaces or heavily soiled surfaces) unless additional measures are taken to prevent it from slipping.
Do not exceed the maximum load for the stepladder.
Do not overreach. Keep your belt buckle (or navel) within the side rails of the ladder and both feet on the same step while working.
Do not get off the stepladder at a higher level without additional safety measures, for example a suitable device to improve stability.
Do not use standalone ladders to get to another level.
Stepladders must only be used for light, short-duration work.
Do not use the stepladder outdoors in bad weather, for example in strong wind.
Take precautions to prevent children playing on the stepladder.
Face the stepladder when climbing up or down the steps.
Keep a firm grip on the steps when climbing up or down the stepladder.
Do not use the stepladder as a footbridge.
Wear suitable footwear when climbing on a stepladder.
Avoid work on stepladders that involves lateral tensions, for example drilling to the side in solid material (brick or concrete).
Do not spend a long time on the stepladder without frequent breaks (tiredness is a risk factor).
Equipment carried up on a stepladder should be lightweight and easy to handle.
Always keep a firm grip with at least one hand when working on the stepladder, or if this is not possible take additional safety precautions.
Check that the product is suitable for the actual task.
Do not make any modifications to the product.
Pay attention to the wind when using it outdoors.
Do not move the stepladder while someone is on it.

MAINTENANCE

Check the parts on the stepladder and the hinges at regular intervals. Use low viscosity oil when it is cold. Lubricate the hinges at regular intervals, but be careful not to drip oil on the steps or side rails.
Stepladders should be stored away from exposure to rain, snow and direct sunlight.

INSPECTION

Carry out inspections regularly

Check that the legs (uprights) are not bent, twisted, dented, cracked, corroded or rotten.
Check that the legs (uprights) are in good condition around the fixing points for other components.
Check that the fixings (rivets, screws and bolts) are not missing, loose or corroded.
Check that the rungs/steps are not missing, excessively worn, corroded or damaged.
Check that the hinges between the front and rear sections are not damaged, loose or corroded.
Check that the locking mechanism stays horizontal and that the rear rails and corner braces are not missing, bent, loose, corroded or damaged.
Check that the entire stepladder is free from contaminants (e.g. dirt, mud, paint, oil and grease).
Check that the locking catches (if fitted) are not damaged or corroded, and check that they function properly.
Check that the platform (if fitted) has no missing parts or fixings and that it is not damaged or corroded.

Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.