Power Dynamics PDY2215A Active Speaker User Manual

: June 13, 2024
: Power Dynamics

Table of Contents

Power Dynamics PDY2215A Active Speaker User Manual
UNPACKING INSTRUCTION
POWERSUPPLY
CONTROLS AND CONNECTIONS
REPLACING THE FUSE
Procedure:
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Power Dynamics PDY2215A Active Speaker User Manual

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the unit, please ask advice from a When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage carrying Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and
Do not place the unit near heat sources such as radiators, Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and
When unplugging the unit from a mains outlet, always pull the plug, never the
Do not plug or unplug the unit with wet
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit Contact your dealer.
To avoid fire and shock hazard, do not expose the unit to rain and
All repairs should be carried out by a qualified technician
Connect the unit to an earthed mains outlet (220- 240Vac/50Hz) protected by a 10-16A
During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on.
Never use the unit in humid rooms or
To prevent accidents in companies, you must follow the applicable guide lines and follow the
Do not repeatedly switch the fixture on and off. This shortens the life
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and In case of malfunction, always seek advice from a specialist.
Do not force the
This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
If this product have a built-in lead-acid rechargeable Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on
Do not use chemicals to clean the unit. They damage the Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
Keep the original packing material so that you can transport the unit in safe

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY

The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrical ground to avoid the risk of electrocution or fire.

CONTROLS AND CONNECTIONS

CHANNEL 1 OUTPUT LEVEL CONTROL: Adjust the volume of channel
CHANNEL 2 OUTPUT LEVEL CONTROL: Adjust the volume of channel
CHANNEL 1 COMBO JACK LINE INPUT: Line signal entry, suitable for both XLR and 3mm jack.
CHANNEL 2 COMBO JACK LINE INPUT: Line signal entry, suitable for both XLR and 3mm jack.
MIC/LINE SWITCH: Press to change between microphone input and line input for channel
RCA LINE INPUT: Channel 2 RCA input for connecting audio units with line level output (e.g. mixer, CD player).
DSP PRESET: Change DSP preset between “low cut”, “live” and “DJ”.
MASTER OUTPUT LEVEL: Adjust the overall output
XLR MIX OUTPUT: XLR output for both channel 1 and channel
POWER CONNECTOR B: Socket for plugging in the supplied power
FUSE HOLDER: For instructions on how to replace the fuse, please see chapter “REPLACING THE FUSE”.

POWER SWITCH: Switch to turn the device ON or OFF.

REPLACING THE FUSE

If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead

Procedure:

Step 1: Open the fuse holder on the rear panel with a fitting screwdriver. Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder. Step 4: Replace the fuse holder in the housing