TRAXXAS 68154-4 Slash 4X4 Brushless Instructions

: June 13, 2024
: Traxxas

68154-4 Slash 4X4 Brushless

Product Information

The product is a Traxxas RC car upgrade kit. It includes various
parts and accessories designed to enhance the performance and
durability of the RC car.

The kit includes the following optional accessories:

Slipper pressure plate & hub (aluminum alloy)
Slipper pressure plate and hub (alloy)
Extreme HD Upgrade Kit
Carriers, stub axle, rear, extreme heavy duty (available in
black, blue, gray, green, orange, and red)
Caster blocks (c-hubs), extreme heavy duty (available in black,
blue, gray, green, orange, and red)
Differential output yoke assembly, extreme heavy duty
Driveshaft assembly, front, extreme heavy duty with 6mm
axle

Product Usage Instructions

To use the Traxxas RC car upgrade kit, follow these steps:

Identify the specific parts and accessories required for your
desired upgrade.
Refer to the user manual or online resources for detailed
installation instructions for each specific part.
Ensure that you have all the necessary tools for the
installation process.
Follow the step-by-step instructions provided to disassemble
the relevant sections of your RC car.
Replace the original parts with the corresponding parts from
the upgrade kit.
Securely fasten the new parts in place according to the
provided instructions.
Repeat the process for each part included in the upgrade
kit.
Once all the parts have been installed, reassemble the RC
car.
Perform any necessary adjustments or fine-tuning to ensure
optimal performance.

If you encounter any difficulties during the installation
process or have any questions, you can contact Traxxas for
assistance by calling 1-888-TRAXXAS or emailing
support@Traxxas.com.

Slash® 4X4 Brushless (Model 68154-4) Parts List

Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.

2728 5119A 5119 5120 5116 5117 5118 5114 3934 2545 1985
1926 1726 6965
6932-GRN
6932L
6932-RED
2514 6813R 6966 6967 9950
5119A 5119 5120 5116 5117 6893X
6893G
6841 6877A 6877 6814 6888 6855 6855G 6855R 7455 9090 6883
5148 6884
6893 6890 6890X 5352R
5352X
5552X
2575 2554 3932 1647 6878

Bearings & Bushings
Ball bearings (5x8x2.5mm) (2) Ball bearings, black rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (12x18x4mm) (2) Ball bearings, blue rubber sealed (5x11x4mm) (2) Ball bearings, blue rubber sealed (6x12x4mm) (2) Ball bearings, blue rubber sealed (8x16x5mm) (2) Ball bearings, blue rubber shield (5x8x2.5mm) (2) Body clips, heavy duty (12) Bushings (plastic) (5x8x2.5mm) (4) PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)
Body & Accessories
Antenna caps, vinyl (2)/ antenna spool Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) Body, Slash® 4X4 (clear, requires painting)/ window masks/ decal sheet (requires #6967 latches and #6966 latch mounts for clipless mounting) Body, Slash® 4X4, green (painted, decals applied) (assembled with front & rear body mount latches for clipless mounting) Body, Slash® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ body mount latch (front & rear)/ latch mounts/ decal sheet Body, Slash® 4X4, red (painted, decals applied) (assembled with front & rear body mount latches for clipless mounting) Decal sheet, racing sponsors Decal sheet, Slash® 4X4 Latch mounts/ retainers (front & rear, left & right) Latch, body mounts (front & rear) Official Team Traxxas® racing decal set(flag logo/ 6-color)
Center Driveline
Ball bearings, black rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (12x18x4mm) (2) Ball bearings, blue rubber sealed (5x11x4mm) (2) Ball bearings, blue rubber sealed (6x12x4mm) (2) Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Cover, center driveshaft (clear) Cover, gear (clear) Cover, gear/ motor wire hold-down clip Differential kit, center (complete) Drive hub, center, rear (1)/ 4×3 GS (1) Driveshaft, center, 6061-T6 aluminum (blue-anodized) Driveshaft, center, 6061-T6 aluminum (green-anodized) Driveshaft, center, 6061-T6 aluminum (red-anodized) Driveshaft, center, plastic (black)/ screw pin Gear adapter, fixed Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft) Grease, white lithium Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5×8 (4) Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1) Plate, motor Plate, motor, 6061-T6 aluminum (blue- anodized) Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2×9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2×9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1)) Screws, 3x6mm button-head machine (hex drive) (6) Screws, 3x6mm caphead machine (hex drive) (6) Screws, 3x6mm flat-head machine (hex drive) (6) Silicone Grease Slipper clutch, complete (for Slash 4×4)

5556 5351
6976
10125 3924
3628
6835X
6835 6836X
6836 7421 6822 6841 5827
5827X
6840 3925 3629
5119 5117 5118 5381
6780 6814 6882X
6783 6781
6881 6880 6782 5379X 6778 6779 5379R
6879R
6879 3965 1647
5119A 5119 5116 9059X 9057X 9057
9051
9052
6855 6855G 6855R 7455

Slipper pressure plate & hub (aluminum alloy) Slipper pressure plate and hub (alloy)
Chassis & Attachments
Body mount, front/ adapter, front/ inserts (2) (for clipless body mounting) Body mount, rear/ inserts (2) (for clipless body mounting) Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2) Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2) Bumper, front / bumper support (fits Slash® 4X4) (for LED light kit installation) Bumper, front/ bumper mount, front (black) Bumper, rear / bumper mount (fits Slash® 4X4) (for LED light kit installation) Bumper, rear/ bumper mount, rear (black) Chassis conversion kit, low CG (Slash 4×4) Chassis, Slash 4X4 Cover, center driveshaft (clear) Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip (allows for installation of taller, multicell batteries) Mount, Go-Pro camera, fiberglass Seal kit, receiver box (includes o-ring, seals, and silicone grease) Seal kit, receiver box (includes o-ring, seals, and silicone grease)
Differential Components
Ball bearings, blue rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (6x12x4mm) (2) Ball bearings, blue rubber sealed (8x16x5mm) (2) Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW Differential kit, center (complete) Differential kit, center (complete) Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support) Gear set, differential (spider gears (4)/ spider gear shaft (2)) Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket (1)/ bushings (4)/ 5x10x0.5 PTW (1)/ 2.5×10 CCS (with threadlock) (4) Housings, differential, front Housings, differential, rear Output gears, center differential, hardened steel (2) Ring gear, differential/ pinion gear, differential Ring gear, differential/ pinion gear, differential (12/47 ratio) (front) Ring gear, differential/ pinion gear, differential (12/47 ratio) (rear) Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Ring gear, differential/ pinion gear, differential (machined, spiral cut) (rear) Ring gear, differential/ pinion gear, differential (rear) Screws, 2.5x8mm cap-head machine (6) Silicone Grease
Driveline Components
Ball bearings, black rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (10x15x4mm) (2) Ball bearings, blue rubber sealed (5x11x4mm) (2) Cross pin (2)/ drive pin (2) (repairs 1 axle shaft) Differential output shafts, steel-splined constant-velocity (2) Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft) (for use with #9080 upgrade kit) Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit) Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit) Driveshaft, center, 6061-T6 aluminum (blue-anodized) Driveshaft, center, 6061-T6 aluminum (green-anodized) Driveshaft, center, 6061-T6 aluminum (red- anodized) Driveshaft, center, plastic (black)/ screw pin

For assistance, call 1-888-TRAXXAS, or e-mail Traxxas anytime at support@Traxxas.com

REV. 230620 1731

Page 2 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

9051R
9051X 9052R
9052X 9055X 9056X 9058X 9056
9054X 9053X 5452

Driveshafts, front, extreme heavy duty, steel-spline constantvelocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit) Driveshafts, front, steel-spline constant-velocity (complete assembly) (2) Driveshafts, rear, extreme heavy duty, steel-spline constantvelocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit) Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) Half shaft, external splined (steel-spline constant velocity) (1) Half shaft, internal splined (steel-spline constant velocity) (1) Rebuild kit, steel- splined constant-velocity driveshafts (includes pins and hardware for one axle shaft) Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit) Stub axle, front, steel-splined constant velocity (1) Stub axle, rear, steel-splined constant velocity (1) U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pin (4)/ e-clips (20)) (metal parts for 2 driveshafts)

Extreme HD Upgrade Kit

9050

Carriers, stub axle, rear, extreme heavy duty, black (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050X

Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050-GRAY Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050G

Carriers, stub axle, rear, extreme heavy duty, green (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050T

Carriers, stub axle, rear, extreme heavy duty, orange (left &

right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with

9080 upgrade kit)

9050R

Carriers, stub axle, rear, extreme heavy duty, red (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032

Caster blocks (c-hubs), extreme heavy duty, black (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032X

Caster blocks (c-hubs), extreme heavy duty, blue (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032-GRAY Caster blocks (c-hubs), extreme heavy duty, gray (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032G

Caster blocks (c-hubs), extreme heavy duty, green (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032T

Caster blocks (c-hubs), extreme heavy duty, orange (left &

right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with

9080 upgrade kit)

9032R

Caster blocks (c-hubs), extreme heavy duty, red (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9057

Differential output yoke assembly, extreme heavy duty (2) (left or

right, front or rear) (assembled with external-splined half shaft) (for

use with #9080 upgrade kit)

9051

Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/

screw pin (1) (left or right) (fully assembled, ready to install) (for use

with #9080 upgrade kit)

9052

Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/

screw pin (1) (left or right) (fully assembled, ready to install) (for use

with #9080 upgrade kit)

9051R

Driveshafts, front, extreme heavy duty, steel-spline constant-

velocity with 6mm stub axles (complete assembly) (2) (for use

with #9080 upgrade kit)

9052R

Driveshafts, rear, extreme heavy duty, steel-spline constant-

velocity with 6mm stub axles (complete assembly) (2) (for use

with #9080 upgrade kit)

9080

Outer Driveline & Suspension Upgrade Kit, extreme heavy duty,

black

9080X

Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, blue

9080-GRAY Outer Driveline & Suspension Upgrade Kit, extreme heavy duty,

gray

9080G

Outer Driveline & Suspension Upgrade Kit, extreme heavy duty,

green

9080T

Outer Driveline & Suspension Upgrade Kit, extreme heavy duty,

orange

9080R

Outer Driveline & Suspension Upgrade Kit, extreme heavy duty,

red

9043

Screw pins, 3x16mm, extreme heavy duty (6) (for use with #9080

upgrade kit)

9038

Shock tower, front, extreme heavy duty, black (for use with

9080 upgrade kit)

9038X

Shock tower, front, extreme heavy duty, blue (for use with #9080

upgrade kit)

9038-GRAY Shock tower, front, extreme heavy duty, gray (for use with #9080

upgrade kit)

9038G

Shock tower, front, extreme heavy duty, green (for use with

9080 upgrade kit)

9038T

Shock tower, front, extreme heavy duty, orange (for use with

9080 upgrade kit)

9038R

Shock tower, front, extreme heavy duty, red (for use with #9080

upgrade kit)

9039

Shock tower, rear, extreme heavy duty, black (for use with

9080 upgrade kit)

9039X

Shock tower, rear, extreme heavy duty, blue (for use with #9080

upgrade kit)

9039-GRAY Shock tower, rear, extreme heavy duty, gray (for use with #9080

upgrade kit)

9039G

Shock tower, rear, extreme heavy duty, green (for use with

9080 upgrade kit)

9039T

Shock tower, rear, extreme heavy duty, orange (for use with

9080 upgrade kit)

9039R

Shock tower, rear, extreme heavy duty, red (for use with #9080

upgrade kit)

9037

Steering blocks, extreme heavy duty, black (left & right)/

3x20mm BCS (2) (for use with #9080 upgrade kit)

9037X

Steering blocks, extreme heavy duty, blue (left & right)/ 3x20mm

BCS (2) (for use with #9080 upgrade kit)

9037-GRAY Steering blocks, extreme heavy duty, gray (left & right)/ 3x20mm

BCS (2) (for use with #9080 upgrade kit)

9037G

Steering blocks, extreme heavy duty, green (left & right)/

3x20mm BCS (2) (for use with #9080 upgrade kit)

9037T

Steering blocks, extreme heavy duty, orange (left & right)/

3x20mm BCS (2) (for use with #9080 upgrade kit)

9037R

Steering blocks, extreme heavy duty, red (left & right)/ 3x20mm

BCS (2) (for use with #9080 upgrade kit)

9056

Stub axle assembly, front, outer, extreme heavy duty (1) (left or right)

(assembled with internal-splined half shaft) (for use with #9080

upgrade kit)

9055

Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right)

(assembled with internal-splined half shaft) (for use with #9080

upgrade kit)

9054

Stub axle, front, 6mm, extreme heavy duty (for use with #9051R

steel CV driveshafts)

9053

Stub axle, rear, 6mm, extreme heavy duty (for use with #9052R

steel CV driveshafts)

9042

Suspension pin set, extreme heavy duty, complete (front and rear)

(3x52mm (4), 3x32mm (2), 3x40mm (2)) (for use with #9080 upgrade

kit)

9042X

Suspension pin set, extreme heavy duty, complete (front and

rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/

M2.5×0.45mm NL (8) (for use with #9080 upgrade kit)

9069

Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2×9.8mm pin

(4) (for use with #9080 upgrade kit and 6mm axles)

Front Suspension & Steering

6823

Bulkhead tie bars, front & rear, aluminum (blue-anodized)

6823G

Bulkhead tie bars, front & rear, aluminum (green-anodized)

6823R

Bulkhead tie bars, front & rear, aluminum (red-anodized)

6830X

Bulkhead, front

6748-BLK Camber link set (plastic/ non-adjustable) (front &rear) (black)

3643X

Camber links, front (TUBES blue-anodized, 7075-T6 aluminum,

stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum

wrench (1) (#2579 3×15 BCS (4) required for installation)

3643G

Camber links, front (TUBES green-anodized, 7075-T6 aluminum,

stronger than Titanium) (83mm) (2)/ rod ends (4)/ aluminum

wrench (1) (#2579 3×15 BCS (4) required for installation)

3643R

Camber links, front (TUBES red-anodized, 7075-T6 aluminum,

stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum

wrench (1) (#2579 3×15 BCS (4) required for installation)

9032

Caster blocks (c-hubs), extreme heavy duty, black (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032X

Caster blocks (c-hubs), extreme heavy duty, blue (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032-GRAY Caster blocks (c-hubs), extreme heavy duty, gray (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9032G

Caster blocks (c-hubs), extreme heavy duty, green (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

REV. 230620 1731

Page 3 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

9032T

Caster blocks (c-hubs), extreme heavy duty, orange (left &

right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with

9080 upgrade kit)

9032R

Caster blocks (c-hubs), extreme heavy duty, red (left & right)/

3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9057

Differential output yoke assembly, extreme heavy duty (2) (left or

right, front or rear) (assembled with external-splined half shaft) (for

use with #9080 upgrade kit)

6845A

Drag link, machined 6061-T6 aluminum (blue-anodized)

6845G

Drag link, machined 6061-T6 aluminum (green-anodized)

6845T

Drag link, machined 6061-T6 aluminum (orange-anodized)

6845R

Drag link, machined 6061-T6 aluminum (red-anodized)

9051

Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/

screw pin (1) (left or right) (fully assembled, ready to install) (for use

with #9080 upgrade kit)

9051R

Driveshafts, front, extreme heavy duty, steel-spline constant-

velocity with 6mm stub axles (complete assembly) (2) (for use

with #9080 upgrade kit)

6895

Linkage, front sway bar (Slash 4×4) (2) (assembled with rod

ends, hollow balls and ball studs)

6897

Linkage, rear sway bar (Slash 4×4) (2) (assembled with rod

ends, hollow balls and ball studs)

6846

Linkage, steering (Revo) (3x20mm turnbuckle) (1)/ rod ends (2)/

hollow balls (2)

3646

Screws, 3x15mm flat-head machine (hex drive) (6)

9038

Shock tower, front, extreme heavy duty, black (for use with

9080 upgrade kit)

9038X

Shock tower, front, extreme heavy duty, blue (for use with #9080

upgrade kit)

9038-GRAY Shock tower, front, extreme heavy duty, gray (for use with #9080

upgrade kit)

9038G

Shock tower, front, extreme heavy duty, green (for use with

9080 upgrade kit)

9038T

Shock tower, front, extreme heavy duty, orange (for use with

9080 upgrade kit)

9038R

Shock tower, front, extreme heavy duty, red (for use with #9080

upgrade kit)

6845X

Steering bellcranks/ servo saver/ servo saver spring/ servo spring

retainer/servo horn, steering

9037

Steering blocks, extreme heavy duty, black (left & right)/

3x20mm BCS (2) (for use with #9080 upgrade kit)

9037X

Steering blocks, extreme heavy duty, blue (left & right)/ 3x20mm

BCS (2) (for use with #9080 upgrade kit)

9037-GRAY Steering blocks, extreme heavy duty, gray (left & right)/ 3x20mm

BCS (2) (for use with #9080 upgrade kit)

9037G

Steering blocks, extreme heavy duty, green (left & right)/

3x20mm BCS (2) (for use with #9080 upgrade kit)

9037T

Steering blocks, extreme heavy duty, orange (left & right)/

3x20mm BCS (2) (for use with #9080 upgrade kit)

9037R

Steering blocks, extreme heavy duty, red (left & right)/ 3x20mm

BCS (2) (for use with #9080 upgrade kit)

9056

Stub axle assembly, front, outer, extreme heavy duty (1) (left or right)

(assembled with internal-splined half shaft) (for use with #9080

upgrade kit)

3655P

Suspension arms, blue, front/rear (left & right), heavy duty (2)

3655R

Suspension arms, front/rear (left & right), heavy duty (2)

3655G

Suspension arms, green, front/rear (left & right), heavy duty (2)

3655T

Suspension arms, orange, front/rear (left & right), heavy duty (2)

3655L

Suspension arms, red, front/rear (left & right), heavy duty (2)

6834

Suspension pin set, complete (front and rear)

9042

Suspension pin set, extreme heavy duty, complete (front and rear)

(3x52mm (4), 3x32mm (2), 3x40mm (2)) (for use with #9080 upgrade

kit)

9042X

Suspension pin set, extreme heavy duty, complete (front and

rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/

M2.5×0.45mm NL (8) (for use with #9080 upgrade kit)

6898

Sway bar kit (front and rear) (includes front and rear sway bars

and adjustable linkage)

6742

Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm

center to center)

6742X

Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger

than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)

6742G

Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger

than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)

6742R

Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger

than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)

3643

Turnbuckles, camber link, 49mm (82mm center to center)

(assembled with rod ends and hollow balls) (1 left, 1 right)

6896

Wires, sway bar (front & rear, hard & soft) (Slash 4X4)/ 3×6 FCS

(4)

1926 1726 3935 3935A 3934 1589 2745 3647 1747 1747A 1985 5525 2742X 3347 3215 3965 2577 2578 2552 2579 2586 3646 2583 2580 2591 2582 2592 2575 2534 3932 2576 1552
3931 3937 2542 2546 2743 3642X 2754 2746
6835X
6836X
3690
5893
6894
2263
1726 2260
3382
3383
3340 9090 2053 2072A 2252 3354R 6860A
6860R 3384 3347 3932

Hardware
Antenna caps, vinyl (2)/ antenna spool Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) Body clip (mounting clip), angled, 90-degrees (10) Body clip (mounting clip), angled, 90-degrees (black) (10) Body clips, heavy duty (12) Double-sided adhesive tape (25mm x 25mm) Nuts, 3mm nylon locking (12) Nuts, 4mm flanged nylon locking (steel, serrated) (8) Nuts, 4mm nylon locking (10) Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4) PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings) Rod ends (12)/ hollow balls (12) Rod ends, short (6)/ hollow balls (6) Screws, 2.5x5mm button-head machine (hex drive) (6) Screws, 2.5x6mm cap-head machine (hex drive) (6) Screws, 2.5x8mm cap-head machine (6) Screws, 3x10mm button-head machine (hex drive) (6) Screws, 3x12mm button-head machine (hex drive) (6) Screws, 3x12mm countersunk machine (6) (hex drive) Screws, 3x15mm button-head machine (hex drive) (6) Screws, 3x15mm cap-head machine (hex drive) (6) Screws, 3x15mm flat-head machine (hex drive) (6) Screws, 3×18 button-head machine (hex drive) (6) Screws, 3x20mm button-head machine (hex drive) (6) Screws, 3x23mm button- head machine (hex drive) (6) Screws, 3x30mm button-head machine (hex drive) (6) Screws, 3x40mm button-head machine (hex drive) (6) Screws, 3x6mm button- head machine (hex drive) (6) Screws, 3x6mm countersunk machine (6) (hex drive) Screws, 3x6mm flat-head machine (hex drive) (6) Screws, 3x8mm button-head machine (hex drive) (6) Screws, 3x8mm cap-head machine (hex drive) (6)/washers (6)/ wrench Screws, 3x8mm flat-head machine (hex drive) (6) Screws, 4x12mm button-head machine (hex drive) (6) Screws, 4x12mm countersunk machine (hex drive) (6) Screws, 4x15mm countersunk machine (hex drive) (6) Set (grub) screws, 3mm hardened (12) Shoulder screws, Ultra Shocks (3×12 hex drive) (6) Stub axle pins (4) Washers, 3x6mm metal (12)
LED Lights
Bumper, front / bumper support (fits Slash® 4X4) (for LED light kit installation) Bumper, rear / bumper mount (fits Slash® 4X4) (for LED light kit installation) LED light bar, front (assembled)/ 3×8 BCS (2)/ 2.5×8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD Slash®, or #6735 for 4WD Stampede®) LED light harness, rear (requires #5838, 6737X, or 6836 rear bumper) LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits Slash® 4X4) Y-harness, BEC to LED light set
Motors & Electronics
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) BEC assembly (complete) (12.6 volts (3s LiPo) maximum input voltage) BL-2sTM Brushless Power System, waterproof (includes BL-2sTM ESC & BL-2sTM 3300 motor) BL-2sTM Electronic Speed Control, waterproof (brushless) (fwd/rev/brake) Cooling fan, Velineon® VXL-3s ESC Gear adapter, fixed Gear set (for 2055, 2056 servos) Gear set (for 2070, 2075 servos) Gear set, metal (for 2250, 2255 servos) Motor cover, endbell (Velineon® 3500) Motor mount (assembled with 3×6 flat-head machine screw)/ 3.0mm NL (1) Motor mount, 6061-T6 aluminum (blue-anodized) Motor, BL-2sTM 3300, brushless Screws, 2.5x5mm button-head machine (hex drive) (6) Screws, 3x6mm flat-head machine (hex drive) (6)

REV. 230620 1731

Page 4 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

2254 2253 2251
2074 2075R 2075 2250
2255
2075X 2056 3350R
3355R
2842X 2843X 2869X 2976 2938X
2943 6548
2914 2923X 2926X 2942X 2940X 2941X 2952X 2950X 2951X 2960X 2961X 2260
2927R 2975 2972
2973
2970
2981
6525 6512 2978 2053 2072A 2252 2968X
2968
6555
6535
6519 6533 3932 6552
6526 6527 6520 6521 2254 2253 2251
2074 2075R 2075

Servo case, aluminum (middle) (blue-anodized) (for 2250 servo) Servo case, aluminum (middle) (red-anodized) (for 2255 servo) Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos) Servo case/gaskets (for 2056 and 2075 waterproof servos) Servo, digital high-speed, metal gear (ball bearing), waterproof Servo, digital high-torque (ball bearing), waterproof Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof Servo, digital high-torque, metal gear (ball bearing), waterproof Servo, high-torque, waterproof (blue case) Velineon® VXL-3s Brushless Power System, waterproof (includes VXL-3s waterproof ESC , Velineon® 3500 motor, and speed control mounting plate (part #3725)) VXL-3s Waterproof Electronic Speed Control (brushless) (fwd/rev/brake)
Radio System, Batteries & Chargers
5000mah 7.4v 2-Cell 25C LiPo Battery 5800mah 7.4v 2-Cell 25C LiPo Battery 7600mah 7.4v 2-Cell 25C LiPo Battery AC to DC adapter Adapter, Traxxas® iD® LiPo battery (adapts Traxxas® iD® batteries to separate balance ports) Battery charge indicators, green (4), grey (4), blue (4) Battery door, TQ 2.4 transmitter (replacement for #6516, 6517 transmitter) Battery, Power Cell AA Alkaline (4) Battery, Power Cell, 3000mAh (NiMH, 7-C flat, 8.4V) Battery, Power Cell, 3000mAh (NiMH, 7-C hump, 8.4V) Battery, Series 3 Power Cell, 3300mAh (NiMH, 6-C flat, 7.2V) Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C flat, 8.4V) Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C hump, 8.4V) Battery, Series 4 Power Cell, 4200mAh (NiMH, 6-C flat, 7.2V) Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C flat, 8.4V) Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C hump, 8.4V) Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C flat, 8.4V) Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C hump, 8.4V) BEC assembly (complete) (12.6 volts (3s LiPo) maximum input voltage) Charger, A/C, 500 mAh (7 cell, NiMH) Charger, D/C, 4 amp (6 – 7 cell, 7.2 – 8.4 volt, NiMH) Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery Identification Charger, EZ-Peak Live Dual, 200W, NiMH/LiPo with iD Auto Battery Identification Charger, EZ-Peak Plus, 4 amp, NiMH/LiPo with iD Auto Battery Identification Charger, EZ-Peak® Plus 4s, 8 amp, NiMH/LiPo with iD® Auto Battery Identification Communication link, telemetry expander Cover plate, Traxxas® Link Bluetooth® module Fuse, D/C charger, 5A (2) (for #2974, 2975, 2977) Gear set (for 2055, 2056 servos) Gear set (for 2070, 2075 servos) Gear set, metal (for 2250, 2255 servos) LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries) LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas® iD® batteries) Mount, telemetry expander (fits Slash 4X4, Stampede® 4X4, Rally, Jato®) Mount, temperature sensor (electric motors)/ wire tie/ thermal pad Receiver, micro, TQ 2.4GHz (3-channel) Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel) Screws, 3x6mm flat-head machine (hex drive) (6) Seal kit, expander box (includes o-ring, seals, and silicone grease) Sensor, auto-detectable, temperature Sensor, auto-detectable, voltage Sensor, RPM (long)/ 3x4mm BCS (1)/ 3×4 GS (1) Sensor, temperature and voltage (long) Servo case, aluminum (middle) (blue-anodized) (for 2250 servo) Servo case, aluminum (middle) (red- anodized) (for 2255 servo) Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos) Servo case/gaskets (for 2056 and 2075 waterproof servos) Servo, digital high-speed, metal gear (ball bearing), waterproof Servo, digital high-torque (ball bearing), waterproof

2250 2255 2075X 2056 6553X 6550X 6551X 6539
6538 6540 6509R 6507R
6516 6528 6529 6530 6511

Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof Servo, digital high-torque, metal gear (ball bearing), waterproof Servo, high-torque, waterproof (blue case) Telemetry Expander 2.0 and GPS module 2.0, TQi radio system Telemetry expander 2.0, TQi radio system (for use only with #6551X GPS module) Telemetry GPS module 2.0, TQi radio system (for use only with #6550X telemetry expander) Telemetry trigger magnet holder, center differential/ magnet, 5x2mm (1)/ 3x8mm BCS (3) (for use with #6814 center differential) Telemetry trigger magnet holders, spur gear/ magnet, 5x2mm (1)/ 3x8mm CCS (3)/ 3x10mm CCS (3) Telemetry trigger magnet, 5X2mm (1) TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link enabled, TSM® (2-ch transmitter, 5-ch micro receiver) TQi 2.4 GHz High Output radio system, 4-channel with Traxxas® Link Bluetooth® module, TSM® (4-ch transmitter, 5-ch micro receiver) Transmitter, TQ 2.4GHz, 2-channel (transmitter only) Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 2channel (transmitter only) Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 3channel (transmitter only) Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 4channel (transmitter only) Traxxas® Link Bluetooth® module
Ready-To-Race Model

68154-4

Slash® 4X4 Brushless: 1/10 Scale 4WD Electric Short Course Truck with TQ 2.4GHz Radio System
Rear Suspension

6823

Bulkhead tie bars, front & rear, aluminum (blue-anodized)

6823G

Bulkhead tie bars, front & rear, aluminum (green-anodized)

6823R

Bulkhead tie bars, front & rear, aluminum (red-anodized)

6829

Bulkhead, rear

6748-BLK Camber link set (plastic/ non-adjustable) (front &rear) (black)

3644X

Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum,

stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum

wrench (1) (#2579 3×15 BCS (4) required for installation)

3644G

Camber links, rear (TUBES green-anodized, 7075-T6 aluminum,

stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum

wrench (1) (#2579 3×15 BCS (4) required for installation)

3644R

Camber links, rear (TUBES red-anodized, 7075-T6 aluminum,

stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum

wrench (1) (#2579 3×15 BCS (4) required for installation)

9050

Carriers, stub axle, rear, extreme heavy duty, black (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050X

Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050-GRAY Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050G

Carriers, stub axle, rear, extreme heavy duty, green (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9050T

Carriers, stub axle, rear, extreme heavy duty, orange (left &

right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with

9080 upgrade kit)

9050R

Carriers, stub axle, rear, extreme heavy duty, red (left & right)/

3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080

upgrade kit)

9052

Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/

screw pin (1) (left or right) (fully assembled, ready to install) (for use

with #9080 upgrade kit)

9052R

Driveshafts, rear, extreme heavy duty, steel-spline constant-

velocity with 6mm stub axles (complete assembly) (2) (for use

with #9080 upgrade kit)

6895

Linkage, front sway bar (Slash 4×4) (2) (assembled with rod

ends, hollow balls and ball studs)

6897

Linkage, rear sway bar (Slash 4×4) (2) (assembled with rod

ends, hollow balls and ball studs)

9039

Shock tower, rear, extreme heavy duty, black (for use with

9080 upgrade kit)

9039X

Shock tower, rear, extreme heavy duty, blue (for use with #9080

upgrade kit)

9039-GRAY Shock tower, rear, extreme heavy duty, gray (for use with #9080

upgrade kit)

REV. 230620 1731

Page 5 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

9039G 9039T 9039R 9056
9055
9054 9053 3655P 3655R 3655G 3655T 3655L 6834 9042
9042X
6898 3644
6896
5031 5032 5033 5034 5035 5036 5037 5029 5038X 5038
7466X 7466 7466G 7466A 7466R 7467X 7467 7467G 7467A 7467R 7468X 7468
5475 5158 7463
5469 7464T 7461 7461G

Shock tower, rear, extreme heavy duty, green (for use with #9080 upgrade kit) Shock tower, rear, extreme heavy duty, orange (for use with #9080 upgrade kit) Shock tower, rear, extreme heavy duty, red (for use with #9080 upgrade kit) Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit) Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit) Stub axle, front, 6mm, extreme heavy duty (for use with #9051R steel CV driveshafts) Stub axle, rear, 6mm, extreme heavy duty (for use with #9052R steel CV driveshafts) Suspension arms, blue, front/rear (left & right), heavy duty (2) Suspension arms, front/rear (left & right), heavy duty (2) Suspension arms, green, front/rear (left & right), heavy duty (2) Suspension arms, orange, front/rear (left & right), heavy duty (2) Suspension arms, red, front/rear (left & right), heavy duty (2) Suspension pin set, complete (front and rear) Suspension pin set, extreme heavy duty, complete (front and rear) (3x52mm (4), 3x32mm (2), 3x40mm (2)) (for use with #9080 upgrade kit) Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5×0.45mm NL (8) (for use with

9080 upgrade kit) Sway bar kit (front and rear) (includes front and rear sway

bars and adjustable linkage) Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) (fits front & rear on Slash, rear on Slash 4X4) Wires, sway bar (front & rear, hard & soft) (Slash 4X4)/ 3×6 FCS (4)
Shock Oil
Oil, shock (20 wt, 200 cSt, 60cc) (silicone) Oil, shock (30 wt, 350 cSt, 60cc) (silicone) Oil, shock (40 wt, 500 cSt, 60cc) (silicone) Oil, shock (50 wt, 600 cSt, 60cc) (silicone) Oil, shock (60 wt, 700 cSt, 60cc) (silicone) Oil, shock (70 wt, 900 cSt, 60cc) (silicone) Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone) Shock oil bottle (60cc) (for mixing shock oil) Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack) Spinning carousel rack
Shocks (GTR)
Body, GTR long (hard-anodized, PTFE-coated aluminum) (1) Body, GTR long shock, aluminum (blue-anodized) (PTFE-coated bodies) (1) Body, GTR long shock, aluminum (green-anodized) (PTFEcoated bodies) (1) Body, GTR long shock, aluminum (orange-anodized) (PTFEcoated bodies) (1) Body, GTR long shock, aluminum (red-anodized) (PTFE-coated bodies) (1) Body, GTR xx-long (hard- anodized, PTFE-coated aluminum) (1) Body, GTR xx-long shock, aluminum (blue- anodized) (PTFEcoated bodies) (1) Body, GTR xx-long shock, aluminum (green- anodized) (PTFEcoated bodies) (1) Body, GTR xx-long shock, aluminum (orange- anodized) (PTFEcoated bodies) (1) Body, GTR xx-long shock, aluminum (red- anodized) (PTFEcoated bodies) (1) Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)) Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)) Multi-tool (plastic) Nuts, 2.5mm nylon locking (12) Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks) Rod ends (GTR shocks) Shaft, GTR long, TiN-coated (2) Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

7461X
7462
7462G
7462X
8459 7440 7441 7444 7445 7448 7442 7443 7446 7447 7449
2664 5862
2660
2662
2669
1942
2742X 2667 2362 1664T 2656T
1664 2656 1765 2668
6863 6864 6862 6861 6857 6867 6868 6866 6865 6858
3765A 3766A 1942
2742X 8361 3767A 3767G
3767T
3767P 3767X 2362 1664T 2656T
1664 2656 1765 3769 3768
6863 6864 6862 6861

Shocks, GTR long, hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs) Shocks, GTR xx-long blue-anodized, PTFE- coated bodies with TiN shafts (fully assembled, without springs) (2) Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) Shocks, GTR xx-long, hard-anodized, PTFE- coated bodies with TiN shafts (assembled) (2) (without springs) Spring retainers, lower (captured) (4)/ 2.5×10 CS (4) Spring, shock, white (GTR long) (0.623 rate orange) (1 pair) Spring, shock, white (GTR long) (0.653 rate green) (1 pair) Spring, shock, white (GTR long) (0.767 rate black) (1 pair) Spring, shock, white (GTR long) (0.810 rate pink) (1 pair) Spring, shock, white (GTR long) (0.892 rate blue) (1 pair) Spring, shock, white (GTR xx-long) (0.711 rate orange) (1 pair) Spring, shock, white (GTR xx-long) (0.762 rate green) (1 pair) Spring, shock, white (GTR xx-long) (0.874 rate black) (1 pair) Spring, shock, white (GTR xx-long) (0.884 rate pink) (1 pair) Spring, shock, white (GTR xx-long) (1.004 rate blue) (1 pair)
Shocks (Pro-level Aluminum)
Big Bore shock cylinder (long) (1) Big Bore shocks (hard-anodized & PTFE- coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4) Big-bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (2) Big-bore shocks (xx-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2) Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks) Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) Rod ends, short (6)/ hollow balls (6) Shock caps, aluminum (2) (Big Bore Shocks) Shock rebuild kit (for 2 shocks) Shock shafts, hardened steel, titanium nitride coated (long) (2) Shock shafts, hardened steel, titanium nitride coated (xx-long) (2) Shock shafts, steel, chrome finish (long) (2) Shock shafts, steel, chrome finish (xx-long) (2) Silicone diaphragms (4) Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks) Springs, front (progressive, +10% rate, pink) (2) Springs, front (progressive, +20% rate, blue) (2) Springs, front (progressive, -10% rate, green) (2) Springs, front (progressive, -20% rate, orange) (2) Springs, front (white) (progressive rate) (2) Springs, rear (progressive, +10% rate, pink) (2) Springs, rear (progressive, +20% rate, blue) (2) Springs, rear (progressive, -10% rate, green) (2) Springs, rear (progressive, -20% rate, orange) (2) Springs, rear (white) (progressive rate) (2)
Shocks (Ultra Shocks)
Body, Ultra Shock (long) (grey) (2) Body, Ultra Shock (XXL) (grey) (2) Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) Rod ends, short (6)/ hollow balls (6) Shock caps (black) (4) (assembled with hollow balls) Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks) Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks) Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks) Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks) Shock caps, aluminum (red- anodized) (4) (fits all Ultra Shocks) Shock rebuild kit (for 2 shocks) Shock shafts, hardened steel, titanium nitride coated (long) (2) Shock shafts, hardened steel, titanium nitride coated (xx-long) (2) Shock shafts, steel, chrome finish (long) (2) Shock shafts, steel, chrome finish (xx-long) (2) Silicone diaphragms (4) Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2) Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3hole (2)) Springs, front (progressive, +10% rate, pink) (2) Springs, front (progressive, +20% rate, blue) (2) Springs, front (progressive, -10% rate, green) (2) Springs, front (progressive, -20% rate, orange) (2)

REV. 230620 1731

Page 6 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

6857 6867 6868 6866 6865 6858 3760
3762
3760A
3762A
5119A 6893X
6893G
6814 6888 6888X 6883
6884
6893 5352R
5352X
5552X
2554 6878 5556 5351
9090 6747 3943X
6842 6842R
6843 6843R
3956 3956R
3956X
6845A 6845G 6845T 6845R 6846
2742 1552
6845X
6742
6742X
6742G
6742R
2746

Springs, front (white) (progressive rate) (2) Springs, rear (progressive, +10% rate, pink) (2) Springs, rear (progressive, +20% rate, blue) (2) Springs, rear (progressive, -10% rate, green) (2) Springs, rear (progressive, -20% rate, orange) (2) Springs, rear (white) (progressive rate) (2) Ultra Shocks (black) (long) (complete w/ spring pre-load spacers & springs) (front) (2) Ultra Shocks (black) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2) Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
Slipper Clutch Components
Ball bearings, black rubber sealed (10x15x4mm) (2) Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Differential kit, center (complete) Drive hub, center, rear (1)/ 4×3 GS (1) Drive hub, front, hardened steel (1)/ screw pin (1) Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft) Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5×8 (4) Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1) Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2×9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2×9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1)) Screws, 3x6mm caphead machine (hex drive) (6) Slipper clutch, complete (for Slash 4×4) Slipper pressure plate & hub (aluminum alloy) Slipper pressure plate and hub (alloy)
Spur Gears & Pinion Gears
Gear adapter, fixed Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4×4 center differential) Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4×4 center differential) Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32pitch) (for center differential)
Steering Components
Drag link, machined 6061-T6 aluminum (blue-anodized) Drag link, machined 6061-T6 aluminum (green-anodized) Drag link, machined 6061-T6 aluminum (orange-anodized) Drag link, machined 6061-T6 aluminum (red-anodized) Linkage, steering (Revo) (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2) Rod ends, long (6)/ hollow ball connectors (6) Screws, 3x8mm cap-head machine (hex drive) (6)/washers (6)/ wrench Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center) Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Washers, 3x6mm metal (12)

2537 6748-BLK 3643X
3643G
3643R
3644X
3644G
3644R
5525 3739 6834 6742 6742X 6742G 6742R 3644
3643 5539
2514 9950 9909
5116 5854 3647 1985 1647 2754 5889R
5863R
6874R
6873R
6873X
5867
5880X
5878
6873A
5883A

Suspension Linkage
3mm threaded rods: 1 each of 20mm,25mm&44mm Camber link set (plastic/ non- adjustable) (front &rear) (black) Camber links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than Titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES blue- anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Rod ends (12)/ hollow balls (12) Screw pin set (Rustler®/ Bandit/ Stampede®) Suspension pin set, complete (front and rear) Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center) Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) (fits front & rear on Slash) Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
Team Traxxas Items
Decal sheet, racing sponsors Official Team Traxxas® racing decal set(flag logo/ 6-color) Traxxas® racing banner, red & black (3×7 feet)
Tires & Wheels
Ball bearings, blue rubber sealed (5x11x4mm) (2) Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469) Nuts, 4mm flanged nylon locking (steel, serrated) (8) PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings) Silicone Grease Stub axle pins (4) Tire & wheel assembled, glued (S1 compound) (SCT Split-Spoke black, satin chrome beadlock style wheel (dual profile 2.2″ outer 3.0″ inner), SCT off-road tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated) Tire & wheel assembled, glued (S1 compound) (SCT, black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated) Tire & wheel assy, glued (S1 compound) (SCT Split-Spoke satin chrome, black beadlock wheel, Kumho tire, insert) (2) (4WD front/rear, 2WD rear only) Tire & wheel assy, glued (S1 compound) (SCT SS, chrome red beadlock wheel, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, inserts) (2) (4WD f/r, 2WD rear) Tire & wheel assy, glued (S1 compound) (SCT SS, satin chrome black beadlock wheel, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, inserts) (2) (4WD f/r, 2WD rear) Tire & wheel assy, glued (SCT chrome, red beadlock style wheels, BFGoodrich® Mud-TerrainTM T/A® KM2 tires, inserts) (2)(4WD front/rear, 2WD rear only) Tire & wheel assy, glued (SCT satin chrome, beadlock style wheels, Kumho tires, foam inserts) (2) (4WD front/rear, 2WD rear only) Tire & wheel assy, glued (SCT satin chrome, black beadlock wheel, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, insert) (2)(4WD front/rear, 2WD rear only) Tire & wheel assy, glued (SCT Split-Spoke chrome, red beadlock style wheel, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, inserts) (2) (4WD f/r, 2WD rear) Tire & wheel assy, glued (SCT Split-Spoke, black, blue beadlock wheels, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, inserts) (2) (4WD f/r, 2WD rear)

REV. 230620 1731

Page 7 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

5883 5863 5873X 6891R 5887R
6892R 5887 5869A 5867A 6891 6964 5892G 5892 6873
6892 5889
5873 5873A 5873R 6871 6871R 5871 5871R 1654X 1654 6856X 5353 5480X 5868A 5870A 5868 5872

Tire & wheel assy, glued (SCT Split-Spoke, black, satin chrome beadlock wheels, BFGoodrich® Mud-TerrainTM T/A® KM2 tire, inserts) (2) (4WD f/r, 2WD rear)
Tire & wheel assy, glued (SCT, black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tire & wheel assy, glued (SCTsatin chrome, black beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
Tires & wheels assembled, glued (S1 compound) (SCT SplitSpoke chrome, red beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (S1 compound) (SCT chrome wheels, red beadlock style, dual profile (2.2″ outer, 3.0″ inner), SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (S1 compound) (SCT SplitSpoke satin chrome, black beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT chrome wheels, red beadlock style, dual profile (2.2″ outer, 3.0″ inner), SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT chrome, blue beadlock style wheels, BFGoodrich® Mud-TerrainTM T/A® KM2 tires, foam inserts) (2) (2WD front) Tires & wheels, assembled, glued (SCT chrome, blue beadlock style wheels, BFGoodrich® Mud-TerrainTM T/A® KM2 tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
Tires & wheels, assembled, glued (SCT Split-Spoke chrome, red beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT Split-Spoke gray beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM rated)
Tires & wheels, assembled, glued (SCT Split-Spoke green wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT Split-Spoke orange wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, BFGoodrich® MudTerrainTM T/A® KM2 tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT Split-Spoke, black, satin chrome beadlock style wheel, dual profile (2.2″ outer, 3.0″ inner), SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT, satin chrome wheels, beadlock type, (dual profile 2.2″ outer 3.0″ inner), SCT off-road tires, foam inserts) (2) (Rear) (TSM® rated)
Tires & wheels, assembled, glued (SCT, satin chrome wheels, red beadlock, (dual profile 2.2″ outer 3.0″ inner), SCT off-road tires, foam inserts) (2) (Rear)
Tires & wheels, assembled, glued (SCT, satin chrome, red beadlock wheels, ultra soft S1 compound off-road racing tires, foam inserts) (2) (2WD Rear, 4WD F/R)
Tires, BFGoodrich® Mud-TerrainTM T/A® KM2 (dual profile 4.3×1.7- 2.2/3.0″) (2)/ foam inserts (2)
Tires, BFGoodrich® Mud-TerrainTM T/A® KM2 , ultra-soft (S1 off-road racing compound) (dual profile 4.3×1.7- 2.2/3.0″) (2)/ foam inserts (2)
Tires, off-road racing, SCT dual profile 4.3×1.7- 2.2/3.0″ (2)/ foam inserts (2)
Tires, Ultra soft, S1 compound for off-road racing, SCT dual profile 4.3×1.7- 2.2/3.0″ (2)/ foam inserts (2)
Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2)
Wheel hubs, hex (rear) (2)/ stub axle pins (2)
Wheel hubs, splined, 17mm, short (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (Slash 4WD)
Wheel nuts, splined, 17mm (blue-anodized) (4)
Wheel wrench, splined, 17mm
Wheels, SCT chrome, blue beadlock style, dual profile (2.2″ outer 3.0″ inner) (2) (4WD front/rear, 2WD rear only)
Wheels, SCT chrome, blue beadlock style, dual profile (2.2″ outer, 3.0″ inner) (2) (2WD front only)
Wheels, SCT chrome, red beadlock style, dual profile (2.2″ outer 3.0″ inner) (2) (4WD front/rear, 2WD rear only)
Wheels, SCT satin chrome, beadlock style, dual profile (2.2″ outer 3.0″ inner) (2) (Rear)

5872X 5884A 5884 6872X 6872A 6872
5868X
3433X 3433 3436 3432 3431 8712
8720 8721 8722 8710
8711
8719
8716 8716X 8715 8715X 8714 2748R
3415
3643X
3643G
3643R
3644X
3644G
3644R
5525 6742 6742X

Wheels, SCT satin chrome, black beadlock style, dual profile (2.2″ outer 3.0″ inner) (2) (4WD front/rear, 2WD rear only) Wheels, SCT Split-Spoke, black, blue beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD f/r, 2WD rear) (2) Wheels, SCT Split-Spoke, black, satin chrome beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD f/r, 2WD rear) (2) Wheels, SCT Split-Spoke, chrome, green beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD front/rear, 2WD rear) (2) Wheels, SCT Split-Spoke, chrome, red beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD front/rear, 2WD rear) (2) Wheels, SCT Split-Spoke, satin chrome, black beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD front/rear, 2WD rear only) (2) Wheels, SCT, black, orange beadlock style, dual profile (2.2″ outer 3.0″ inner) (4WD f/r, 2WD rear) (2)
Traxxas Tools
Body reamer (aluminum handle) Body reamer (plastic handle) Cap, body reamer Scissors, curved tip Scissors, straight tip Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4″ drive Speed bit handle, large (overmolded) Speed bit handle, medium (one piece) Speed bit handle, premium (rubber overmold) Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4″ drive Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4″ drive Speed Bit Master Set, nut driver, 6-piece, includes premium handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4″ drive Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4″ drive Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm) 1/4″ drive Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4″ drive Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4″ drive Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4″ drive Tool set (includes 1.5mm hex wrench / 2.0mm hex wrench / 2.5mm hex wrench/ 4-way wrench/ 8mm & 4mm wrench/ U-joint wrench) Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/4mm. 5mm, 5.5mm, 7mm, and 8mm nut drivers/ 2mm, 3mm, and 4mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrenches/ driver handle)
Turnbuckles & Threaded Rods
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than Titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Camber links, rear (TUBES red- anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3×15 BCS (4) required for installation) Rod ends (12)/ hollow balls (12) Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center) Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1)

REV. 230620 1731

Page 8 Slash® 4X4 Brushless: TQTM 2.4GHz Radio (Model 68154-4) Parts List

6742G 6742R 3644
3643 5539

Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) (fits front & rear on Slash) Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)

If you have questions or need technical assistance, call Traxxas at:
1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only)
For orders, calls outside the U.S., and other information, call 972-549-3000, or fax to 972-549-3011 e-mail Traxxas at support@Traxxas.com
TRAXXAS.com

REV. 230620 1731