FreeYond S1A Campione Watch Face Instructions
- June 13, 2024
- FreeYond
Table of Contents
FreeYond S1A Campione Watch Face Instructions
Charge the smartwatch to activate it before first use.
-
Enter Pairing Mode
Press and hold the power button on the side to power on. -
Download The App
Scan the QR code to download FY Watch (Android) or FY Fit (iOS). -
Set Up And Pair
Click “ADD DEVICE” in APP to add the device: -
Scan the QR code on the watch screen;
-
Search the watch Bluetooth for pairing.
Swipe On Home Screen
Shortcuts and settings
Notifications
Fitness data, weather and music control
Menu
Home Button:
Wake the Watch: Press once; Power On: Press and hold till screen lights up; Power Off: Press and hold and choose Power Off; Back to Home Screen: Press once.
Charging
To charge the watch, place the watch flat and make sure that the two metal holes on the back are aligned with the metal tip of the charging head.
Change Straps
Slide the spring pin and hold it to remove a strap from the watch or attach a strap to the watch.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or medications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Parameters
Product Name : Smart Watch
Model: 2308003W
Ingress protection level: IP68
Input rating: 5V 0.2A
Sensor: 3-axis acceleration sensor,
HRM and SpO2 sensor
Battery capacity: 260mAh
Sync mode: Bluetooth 5.2
Resolution: 240*240 pixels
Display: 1.39 inch TFT
Operating temperature: 0℃ ~ 45℃
Operating frequency: 2402MHz ~ 2480MHz
Bluetooth transmit power: ≤ 8dBm
Certification
FCC ID : 2A8FE-WS1A
Note
Please read the instructions before use:
- The product should be charged for more than 2 hours before use, but avoid prolonged charging.
- Please use a charger of 5V/1A or 5V/2A along with the original charging cable from FreeYond.
- The Company reserves the right to change the terms and conditions without prior notice. Some features may vary in different software versions.
Warranty
Thank you for purchasing FreeYond products. If any manufacturing defect problems occur within 12 months from the date of purchase, user can enjoy our company’s warranty service.
Important Information:
- When you buy the product, the sales unit will issue a valid proof of purchase.
- The warranty card and the proof of purchase should be kept by the user properly, and it will not be replaced if lost.
- If the product fails due to non-human factors, the user can present the warranty card and proof of purchase to any FreeYond customer service centres for free maintenance during the warranty period.
Non-warranty Situation:
This warranty does not cover the following cases:
- Out of warranty period.
- Damage caused by use not in accordance with the instructions.
- Damage caused by man-made causes.
- Failure caused by unauthorized disassembly, maintenance, or modification of the product.
- Damage caused by force majeure factors (such as floods, earthquakes, lightning, etc.).
- There is no warranty card, invoice, or warranty card that does not match the invoice information.
- The product wears naturally.
- Other failures and damages that are not caused by the quality of the product itself.
Website : www.ifreeyond.com
Warranty Card (Stub Copy)
Dear user, thank you for using the product of our company.
Please read and keep the warranty card properly after purchasing the product
so that we can
provide better services to you.
Product Information
Product Model
Product Serial Number
User Information
User’s Name
Phone Number
Address
Email
Sales Information
Purchase Date
Invoice Number
Sales Unit
Phone Number
Addr
Warranty Card (Customer Copy)
Dear user, thank you for using the product of our company. Please read and keep the warranty card properly after purchasing the product so that we can provide better services to you.
Product Information
Product Model
Product Serial Number
User Information
User’s Name
Phone Number
Address
Email
Sales Information
Purchase Date
Invoice Number
Sales Unit
Phone Number
Address
Warnings
- Using an incorrect type of battery that can bypass safety measures during replacement. (for example, in the case of some lithium battery types);
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
