ALLEN HEATH M-SQ-WAVES3 Waves Audio Interface Module Instructions
- June 13, 2024
- ALLEN HEATH
Table of Contents
SQ Waves Option Card
M-SQ-WAVES3 Waves Audio Interface Module
M-SQ-WAVES3 is one of several audio networking options that can be fitted to an Allen & Heath SQ mixer. It provides a 64x64ch 48/96kHz interface to the Waves SoundGrid networking and processing platform.
Fitting the card
- Switch the system off.
- Use a Torx T8 driver to remove the 2 screws securing the I/O Port blank panel to the SQ mixer.
- Slide the card into the slot and press it firmly into the mating connector.
- Refit the 2 screws to secure the card.
Software and firmware
Go to the Waves website to learn more about Waves for the Allen & Heath
platform: http://www.waves.com/live-sound/allen-heath
Download further documentation, follow the instructions, set up the hardware
and install the card driver and software: http://www.waves.com/downloads
/allen-heath
Download and install the latest version of SQ firmware: http://www.allen-
heath.com/sq-software
M-SQ-WAVES3 requires SQ firmware V1.3 or higher.
Front panel
Setting clock and patching signals
Use the SQ I/O screen to patch signals to or from the I/O Port.
Use the Setup / Audio / Audio Sync screen to select the clock source for the
mixer. Typically, this is set to Internal, unless the mixer is syncing from
the Waves card (clock slave), for example in a digital split setup.
For more information on SQ setup and functions please refer to the SQ Firmware
Reference Guide available for download at www.allen-heath.com.
Use the Waves SoundGrid Studio application to patch SoundGrid signals to/from
other devices or the SG Driver, and to configure the sample rate and clock
settings for the card.
If you set the mixer clock to Internal, set the card clock to Digital. In a slave system, if you set the mixer to Sync from the I/O Port, set the card clock to Ethernet.
A limited one year manufacturer’s warranty applies to this product, the conditions of which can be found at: www.allen-heath.com/legal.
This product complies with the European Electromagnetic Compatibility directive 2014/30/EU and the European Low Voltage directive 2014/35/EU.
Copyright © 2018 Allen & Heath. All rights reserved.
ALLEN &HEATH
Allen & Heath Limited, Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU,
UK
http://www.allen-heath.com
https://manual-hub.com/
References
- Allen & Heath - Heard Everywhere
- Allen & Heath - Heard Everywhere
- Legal - Allen & Heath
- Allen & Heath M-Waves Software Downloads - Waves Audio
- Plugins for Allen & Heath Consoles - Waves Audio
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>