UYIKOO H01 Spy Camera Hidden Camera User Manual
- June 13, 2024
- UYIKOO
Table of Contents
H01 Camera User Manual
Product Overview
1.USB Data Port
2.Mode Switch
3.Camera Lens
4.TF Card Slot
5.Reset Button
6.Indicator Light| 7.Night Vision Lights
8.Power Button
9.Power Bank Power Button
10.Output Ports
11.Charge Ports
12.Battery Indicator
---|---
NOTE: Before using please full charge the camera, please securely inserted a formatted Micro SD into the SD card slot, otherwise the camera can not work.
Power ON/ OFF
Power ON: Long press power button for 3 seconds, the red and blue
indicator will turn on for 2 seconds, then red indicator turn off and blue
indicator stays on. The camera enters standby mode.
Power OFF: Long press power button for 5 seconds, the red indicator will
flash 6 times and turn off, and the camera will turn off.
NOTE: 1. Under standby mode the camera will turn off automatically if
there no any operation within 1 minute. 2. If the camera has low power, the
red and blue indicators will flash 3 times and turn off, the camera will turn
off automatically.
Video Recording
-
“L” mode recording (long time recording). Switch mode button to “L” position and turn on the camera. Under standby mode(blue indicator stays on), long press power button for 3 seconds, the blue indicator will flash 3 times and turn off, the camera start recording videos.
Note: Recorded videos would be saved as a file every 3 minutes. -
“M” mode recording (motion detection recording). Switch mode button to “M” position and turn on the camera. Under standby mode (red indicator stays on), if the camera detect moving objects, the red indicator will flash 3 times and off, the camera starts recording.
Note: Recorded videos would be saved as a file every 1 minutes.
Take Photos
Switch mode button to “L” position, under standby mode, press the power button once, the blue indicator will flash once, it means that a picture captured and saved.
Automatic Night Vision
The camera will enter night vision mode automatically when the recording environment with low light or in dark place.
Charging
Please use the USB cable connect the charge port to DC 5V power adapter (NOT included)to charge the device, this camera would be fully charged after 8 hours.
Setting Time/Date Stamp
- Insert Micro SD card, connect the device to a proper PC computer by using the USB cable provided.
- When removable disk drive folder appears, click on the drive in the root directory and inside root directory, open the txt file named “time.txt”.
- Write the current date and time in the “time.txt” file with the correct format:
For example: 2021-05-12 08:22:22Y (with time stamp), or 2021-05-12 08:22:22N(without time stamp), then save this file.
Reset
Any problem the camera can’t work properly, please try to reset it. Just need to press the reset button once, then turn on the camera again, it will work well.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>