TSRC AGES 14 Foldable Portable Drone Instruction Manual
- June 12, 2024
- TSRC
Table of Contents
- AGES 14 Foldable Portable Drone
- DISCLAIMER AND SAFETY GUIDELINES
- PARTS LIST
- INTRODUCTION TO DRONE
- INTRODUCTION TO REMOTE CONTROL
- INSTALLATION GUIDE
- BATTERY CHARGING GUIDE
- FLIGHT OPERATION INSTRUCTION
- Product Function Analysis
- APP INSTALLATION AND OPERATION
- BASIC PARAMETER INFORMATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AGES 14+
NO.A4
INSTRUCTIONS FOR USE
FOLDABLE PORTABLE
AGES 14 Foldable Portable Drone
** WARNING NOTE**
In order to ensure the requirements of the electromagnetic environment of
aviation radio stations (stations), the use of various model remote controls
is prohibited in the area with the center point of the airport runway as the
center of the circle and the radius of 5,000 meters. During the period of
radio control orders issued by relevant state departments, the use of model
remote control shall be stopped as required.
DISCLAIMER AND SAFETY GUIDELINES
In order to make it more convenient and safe for you to use this product,
please read all contents of this manual carefully before Using this product,
and keep this manual for future reference.
DISCLAIMER AND SAFETY GUIDELINES
- In order to protect the legitimate rights and interests of users, please be sure to carefully read the instructions, disclaimers and safety instructions provided by us before using this product.
- This product s not suitable for use by persons under the age of 14, Persons under the age of 14 must use under the supervision and guidance of adults with UAV flying experience.
- 0nce you start to use this produict, you shall be deemed to have read, understood, recognized and accepted all terms and contents of the instructions, disclaimers and safety instructions of this product
- In the process of using this product, please be sure to strictly abide by and implement the requirements including but not limited to the instructions and safety instructions. For all personal injuries, accidents, property losses, legal disputes, and other adverse events causing conflicts of interest caused by violations of the use behavior orforce majeure factors indicated i the safety instructions, the user shall bear the relevant responsibilities and losses, and our company and the agent shall not be liable for any.
- Users use this product directly or indirectly for any violation of lsgal prvisions,our company and the agent will ot b responsi ble
SAFETY GUIDELINES
- This product is not suitable for use by persons under the age of 14 and others who do not have full capacity for civil conduct
- This product has high-speed rotating propeller and powerful flight power, which has certain risks during operation. Do not approach and touch the product while it is in operation.
- When using this product, please stay away from airports, railways, highways, high-rise buildings, power lines and other dangerous environments.
- When using this product, please stay away from mobile phone base stations, high-power fransmitting equipment and other high electromagnetic interference environment.
- When using this product, please stay away from all kinds of manned aircraft.
- Do not use this product in rain, thunder, dust, fog, snow, wind, low temperature and other harsh environment.
- This product is not waterproof design, do not operate this product near the water.
- When operating this product, please always maintain a safe distance of about 10 meters befween the drone and people or animals.
- Please keep the drone within the operator’s visual range at all times.
- Do not hover or fly this product over the crowd, do not frighten others for fun,
- Do not operate this product near places where children play.
- Do not use this product to chase vehicles or affect the normal operation of vehicles.
- In non-emergency situations, do not tur off the motor when the product is flying in the air.
- This product can not be used in the case of tobacco and alcohol, fatigue, taking drugs, physical discomfort, etc.
- Please check this product before each use, including but not limited to the solidity of parts, cracks and wear of the body and propeller, battery power, the effectiveness of the indicator light, etc. If any exception is found, stop using it immediately and replace the corresponding parts.
- The abnormal working status of the drone may have an accident, do not start the propeller or reluctantly fly.
- Do not attempt to block any moving parts in the operation of this product.
- Do not modify this product, or use this product for purposes other than the original design.
- Do not operate this product in the no-fly zone of laws and regulations.
- Due to the variety of materials used in the aircraft, high temperature will damage the internal structure of the drone, and lead to unpredictable consequences, so please keep the drone equipment away from heat sources and avoid exposing the drone to direct sunlight for a long time.
- Please follow the product instructions to operate.
- Please use the original parts for maintenance and replacement.
- Lend to other personnel for operation, please ensure that the operator understands and complies with this safety notice.
- Do not mix different types of batteries.
- Do not use expanded, leaked or damaged batteries.
- Do not be near flammable materials (such as carpets, solid wood furniture and wood floors, etc.) when the battery is charging.
- Please use the original configuration of the charging cable charging, donot use oher brands and damaged charging cable charging
- Please keep a safe distance from the high-speed rotating propeller, so as to avoid the risk of strangling and cutting.
- Do not use the model near the ear! Misuse can lead to hearing damage.
- The aircraft should be sed as far away from other electrical equipment and magnetic objects as possible, they may cause interference with each other.
- Please do not short circuit, squeeze the battery, so as to avoid explosion
- The motor is a heating part, do not touch, so as to avoid the risk of burns,
PARTS LIST
INTRODUCTION TO DRONE
INTRODUCTION TO REMOTE CONTROL
INSTALLATION GUIDE
1. Propellers 
Please follow the diagram to ensure that all
propellers are installed inthe correct orientation, if the installation is
wrong, the aircraft will not fly normally.
2. Camera
- Tap the ” ” button on the remote control, or click the “ ” button on the APP interface. When you hear the sound prompt, the APP makes a” click “sound, indicating that the camera takes a photo.
- long press the ” ” button on the remote control, or click the “ ” button on the APP, hear the sound prompt, and the APP will display the recording timing, indicating that the camera is recording.
- Long press ” ” on the remote control again or click ” ” on the APP to stop recording and save the video to the APR (Please do not take pictures when recording)
Attention:
When using the “TSRC” AP, the original pictures and videos captured by the
camera will be compressed and saved to On the phone
3. Phone Holder
As shown in the figure above, the mobile phone s
fixed on the mobile phone bracket of the remote control, and the length of the
remote control bracket can be stretched and adjusted according to the size of
the mobile phone until the mobile phone can be securely fixed on the bracket.
4. Drone Battery
As shown in the figure above, push the drone
battery into the battery compartment at the rear of the fuselage.
5. Remote Control Battery
**** When installing the battery, pay attention
to the positive and negative polarity of the battery and ensure that the
battery is properly installed
BATTERY CHARGING GUIDE
- As shown in the figure above, connect the USB charging cable to the charging portof the drone. The USB charging cable can be connected to a power bank, a computer USB port or a USB charging adapter (5V/0.5-2.08) for charging.
- When the battery is charging, the indicator light on the battery is red; When the battery s fully charged, the Indicator is steady green.
- The charging time of the aircraft battery s about 2 hours (depending on the charging povier source)
Notice:
When the drone is n low power, the APP and remote control will prompt “beep’,
“beep” and “beep”. At this time, please stop flying as soon as possible and
charge the battery of the drone. Before charging, please read the relevant
prompt content of safety instructions to avoid unnecessary losses!
FLIGHT OPERATION INSTRUCTION
1. Pre-flight Settings Step 1: Power on the aircraft and place it on
a horizontal surface
Atthis time, the aircraft placed on the horizontal plane automatically enters
the frequency state, and the indicator light flashes quickly Step 2: Turn
on the remote control
Open the remote control and automatically communicate with the aircraft. AL
this time, the signal ight o the remote control flashes quickly, the requency
s successful, and the indicator light is on.
Note: At this time, you can connect the WIFI signal through the state
displayed i the APP. Step 3: Connect the APP
Turn on the WLFifunction o the mobile deice, select “TSRC -** Inthe W-Fl st
and ‘open the APP. Step 4: Compass calibration
Push the left Joystick of the remote control to the 5″ o clock position, and
the ight Joystick tothe 5″ o clock position Indicatorlight – Flash
Display satus on AP, enter compass calibration.
Step 5: Motor unlock
Pushtheletjoysickon theremotecontrol o the “5”o clock position, andtheright
joystick tothe “7” o clock position.
Motor automatically unlocked start, directly push up the left oystick to take
off, or short press the One Key Takeoff/Landing button to take off(this
function is set before takeoff).
Cancel motor unlock: push the et joysick on th remote control to the direction
of 7 oclock, push theright Joystick to the direction of 5 o’clock, and the
motor stops working,
Aiter the motor s unlocked and does not operatefor 20 seconds, it will
automatically stop working
Once all the lights are steadly on, the aircraft can take off normally.
Indicator: Steady on
2. One-Key Take-off/Landing/Emergency Landing
** The rotating
propeller is dangerous. Do not use the aircraft near crowds.
- Pressthe ” ” one-key take-off button of the remote control, and the aircraft will automatically rise to a height of about 1.5 meters.
- When the aircraft s flying at a high altitude, press the remote control ” ” one-button landing button, and the aircraft will land slowly. During the descent, the aircraft can be controlled by the right joystick to land at the designated place, and the propeller will stop rotating.
**Long press the ” ” button of the remote control for 3 seconds to enter
the emergency landing mode.
Use the emergency stop function only in critical situations, thus reducing
loss and damage.
3. Manual Landing
Slowly push down the left joystick to land the
drone. Hold the push down for a few seconds and wait for the motor to stop.
4. Flight Control**
Product Function Analysis
1. Forward / Backward Fine-Tuning After the aircraft takes off, when the
aircraft moves in the forward direction, adjust the backward fine-tuning
function ke until itis balanced; When the aircraft is moving in the backward
direction, adjust the forward fine-tuning function key until itis balanced.
2. Fly Left/Fly Right Fine-Tuning After the aircraft takes off, when the
aircraft shifts in the left direction, adjust the right fine-tuning function
key until it is balanced; When the aircraft is moving in the right direction,
adjust the left fine-tuning function key until itis balanced.
3. Speed Switch
During the flight of the aircraft, you can press
” ” this function to switch forward, backward, left and right flight speed.
Boot the default is low gear, press ” ” this function key to switch to the
medium speed, while the remote control buzzer will sound” beep “twice, then
press ” ” this function key to switch to high speed gear, while the remote
control buzzer will sound” beep “three times, Click ” ” again to switch this
function to low gear, while the remote control buzzer beeps” beep .
Tip:
The default gear is low speed.
4. Circle Fly
Long press the ” ” button on the remote control,
and the aircraft rotates in circles.
5. 360°Flip
Press the ” ” 360°Flip button, the buzzer on the
remote control will make a *beep beep” sound, then push the right joystick to
the right, as shown in the figure, the aircraft will perform the corresponding
right roll action with the right direction of the push (The same goes for the
front, back, left, and right directions), and the sound disappears at the same
time, and it enters the normal mode.
6. Headless Mode
After frequency and level calibration, short
press the ” ” button on the remote control, and the aircraft enters the”
headless mode ” After entering headless mode, the indicator light of the
aircraft – flashes. Press the ” ” button again to exit the” Headless mode
.
(Itis recommended that the operator’s orientation be consistent
with the head orientation of the aircraft at takeoff)
In headless mode, the forward direction of the aircraft is determined by the head direction of the aircraft when it takes off. We recommend that the orientation of the operator be consistent with the orientation of the aircraft take-off head. When the operator pushes the direction joystick forward, the drone willfly forward; If the operator pushes the direction joystick backward, the drone will fly towards the operator; If the operator moves the direction joystick left/right, the drone moves left and right relative to the operator.
APP INSTALLATION AND OPERATION
Download / Install the APP
Please scan the QR code below to download the “TSRC” app to use the relevant
features. los system, domesti / foreign Android system
http://www.vison-st.com/app/download/tsrc
Applicable mobile system version
105 7.0 or later / Android 4.4 or later.
Wi-Fi Connection
First turn on the aircraft, then turn on the smartphone, and enter the phone’s
Settings screen to start the search for available Wi-Fi networks:
Ifyou are using an iPhone, select “Settings” – > WLAN; \fyg/u are using
Android, select Settings – > Wireless and Networking Wik
Select the Wi-Fi signal named “TSRC-****”.
After the Wi-Fi signal is successfully connected, the connection between the
aircraft and the phone will be automatically established, AL hispoint, ext the
Settings menu and enter the installed “TSRC” APP application.
In the APP operation interface, you can see the current status of the aircraft
and perform corresponding operations.
BASIC PARAMETER INFORMATION
AIRCRAFT
MODEL: A4
WEIGHT: 1508
MOTOR MODEL: 816
OPERATING TEMPERATURE: 0 C 040°C
REMOTE CONTROL
Opersting frequency: 246Hz
Batterytype: AdA L5V battry
Operating temperature: 0° C o 40° C
AIRCRAFT BATTERY
CAPACITY: 1200mah
VouTAGE 37V
BATTER TYPE: Lithum bttery
POER: 4440
CHARGING TIVE: about 120 minutes (Depencs on the charging power supply
and the emaining bttery pover)
CHARGING TEMPERATURE: S~C-40°C
APP/ REAL-TIME IMAGE TRANSFER
APPLICATION: TSRC
REALTIME IMAGE TRANSMISSION
FREQUENCY: 2.4GHz
USB CHARGING CABLE
VOLTAGE: 5V/0.5-2.0A
RATED POWER: <100
NOTE: This equipment has been tested and found to comply with the mits
for
Class B digitaldevice, pursuant o part 15 of the FCC Rules, These limits are
designed to provide reasonable protection against harmiul Interference na
residential instalation. This equipment generates, uses and can radiate radio
frequency energy and, if ot nstalled and used n accordance with the
nstructions, ‘may cause hamfulnterferentce to radio communications. However,
thereis no uarantee thatinterference willnot occurin a articularinstallatio.
if this equipment does cause harmful nterference to rado or television
recepion, which can be determined by urning the equipment offand on, the
useris encouraged to iy to cortect the interference by one of more of the
following measures:
– Reorient or relocate the recehving antenna.
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuitdiferet from that to which
the recelvr s connected.
– Consultthe dealeror an experienced radio/TVtechnican fo help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.