ASLAN 85D High Bake Paint Mask Stencil Installation Guide
- June 13, 2024
- ASLAN
Table of Contents
ASLAN 85D High Bake Paint Mask Stencil
Product Information
The Aslan 85D High Bake Paint Mask Stencil is a self-adhesive film designed for customizing designs on various surfaces, such as car parts, firearms, tumblers, and more. It is specifically suitable for applications that require heat-curing cycles. The stencil works well on smooth, flat, and curved surfaces.
Construction:
- Film Type: PVC, Monomeric Film
- Thickness: 3.1 mil
- Adhesive: Clear Pressure Sensitive Polyacrylate
- Release Liner: Silicon-Coated Paper
Characteristics
- Dimensional Stability: The film does not experience longitudinal or lateral shrinkage.
- Combustibility: The stencil is self-extinguishing.
- Temperature: The stencil can withstand high bake temperatures.
Product Usage Instructions
- Prepare the surface: Ensure that the surface is clean, smooth, and free from dust, oil, or other contaminants.
- Cut the stencil: Use a cutting tool or plotter to cut the desired design from the Aslan 85D High Bake Paint Mask Stencil.
- Peel off the release liner: Carefully remove the silicon-coated paper liner from the back of the stencil, exposing the adhesive side.
- Apply the stencil: Align the stencil on the desired surface and firmly press it down to ensure proper adhesion. Smooth out any air bubbles or wrinkles using a squeegee or similar tool.
- Heat curing: Follow the specific heat curing instructions for your application. The Aslan 85D High Bake Paint Mask Stencil is designed to withstand heat curing cycles.
- Remove the stencil: After the heat curing process, gently peel off the stencil from the surface. Take care not to damage the finished design.
If you have any questions or need further assistance, please contact USCutter Sales at 425-481-3555 or visit USCutter.com.
Aslan 85D High Bake Paint Mask Stencil
The Aslan 85D High Bake Paint Mask Stencil is a self-adhesive film that is ideal for customizing designs on car parts, firearms, tumblers, and many other applications that require heat curing cycles. Works on smooth, flat, and curved surfaces.
CONSTRUCTION
| Film Type | PVC, Monomeric Film |
|---|---|
| Thickness | 3.1 mil |
| Adhesive | Clear Pressure Sensitive Polyacrylate |
| Release Liner | Silicon Coated Paper |
CHARACTERISTICS
Dimensional Stability
| Tested applied to aluminum. Stored of 70°F. for 2 hours| No longitudinal or
lateral shrinkage measured
---|---|---
Combustibility
|
Self-Extinguishing
|
Temperature
|
Min. Application: 59°F
|
Max. Service: 212°F
APPLICATION INSTRUCTIONS
- Intended for dry application only.
- This film was developed for multiple baking cycles at 200°F.
- Allow for cooling between heating cycles.
- Remove promptly after painting and curing cycles.
STORING INFORMATION
The Aslan 85D High Bake Paint Mask has a 2-year shelf life from the production
date. For best results, the material must be stored at temperatures between
59°F and 77°F. It is recommended to store in a location with a relative air
humidity of 50-60%. To avoid surface area issues from appearing on the roll
surface it is recommended to store the material in a vertical standing
position or on an appropriate rack system.
Questions? Contact USCutter Sales at
425-481-3555 or visit
USCutter.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>