RYOBI STM401 Tool Organizer Shelf User Manual
- June 13, 2024
- RYOBI
Table of Contents
RYOBI STM401 Tool Organizer Shelf
Product Information
The Tool Organizer Shelf STM401 is a versatile storage solution designed to help organize and store hand tools. It features a sturdy construction and can support a maximum weight capacity of 50 lbs (22.7 kg) per shelf. The shelf is designed to be mounted on wall rails, which are sold separately. The wall rails must be secured to the wall according to the instructions provided in the wall rail’s operator’s manual to achieve the maximum weight capacity.
Product Specifications
- Wall Rail: Maximum weight capacity of 206 lbs (93.4 kg), with a maximum weight capacity of 75 lbs (34 kg) per linear foot.
- Tool Organizer Shelf: Maximum weight capacity of 50 lbs (22.7 kg) each.
Product Usage Instructions
WARNING: Before using the Tool Organizer Shelf STM401, it is essential to read and understand the safety rules and instructions provided in this manual, as well as the operator’s manual for any wall rail used.
- Begin by mounting the wall rails according to the instructions provided in the wall rail’s operator’s manual. Ensure that the wall rails are securely attached to the wall.
- Position the brackets located on the back of the shelf between two of the raised octagonal patterns on the wall rail.
- Insert the tabs on the shelf into the vertical slots on the wall rail.
- Ensure that the shelf is level with the brackets on the back of the shelf.
- Once properly aligned, the Tool Organizer Shelf STM401 is securely attached to the wall rail and ready to be used for organizing and storing hand tools.
Note : To remove the Tool Organizer Shelf STM401 from the wall rail, slide the shelf upwards and outwards from the wall rail.
SAFETY RULES
WARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire, and/or serious
injury.
READ ALL INSTRUCTIONS
- Know your product. Read the operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this product. Following this rule will reduce the risk of serious personal injury.
- This accessory should only be used with the RYOBI Link Modular Storage System. Using this accessory with other storage systems could result in a falling hazard that can cause death or serious personal injury.
- The maximum weight of all the items placed on each wall rail must not exceed 206 lbs.
- Do not exceed the maximum weight capacity for the wall rails or accessories.
- Secure and mount each wall rail according to the wall rail’s operator’s manual. DO NOT place accessories on wall rails that have been improperly secured or mounted.
- To reduce the risk of injury, do not use accessories that are not specifically designed and recommended by the manufacturer.
- Do not use a wall rail if it is damaged or broken. A damaged or broken wall rail may not mount securely and/or it might not provide adequate support for the items stored on it.
- Ensure the wall rails are securely mounted. Make sure they do not rock, slide, or move before storing products or tools.
- Do not allow children or untrained individuals to use wall rails or accessories.
- Store idle power tools out of the reach of children.
- Always remove battery packs and bits/blades when storing battery-powered tools on the organizer shelf.
- SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct other users. If you loan someone this product, also loan these instructions.
FEATURES
PRODUCT SPECIFICATIONS
Maximum Weight Capacity*
- Wall rail ……………………….. 206 lbs. (75 lbs. per linear foot)
- Tool organizer shelf ……………………………… 50 lbs. each
Wall rails must be secured to the wall according to the instructions in the wall rail’s operator’s manual to achieve maximum weight capacity.
INSTALLATION
WARNING:
To reduce the risk of injury, do not attempt to use this product until you
have read thoroughly and understand completely this operator’s manual and the
operator’s manual for any wall rail used.
ATTACHING/REMOVING THE TOOL ORGANIZER SHELF
- A – Top shelf
- B – Cabinet
- C – Hand tool storage
- A – Tabs
- B – Slots
- C – Bracket
See Figures 1 – 3.
- Mount the wall rails as described in the wall rail operator’s manual.
- Position the brackets on the back of the shelf between two of the raised octagonal patterns on the wall rail.
- Insert the tabs on the shelf into the vertical slots on the wall rail.
- Ensure the shelf is level with the brackets on the back of the shelf firmly against the wall rail, then push down on the shelf until the brackets are secured into the octagonal patterns on the rail.
- Verify the shelf is still level and the tabs are fully inserted into the slots on the wall rail
- IMPORTANT! To ensure the shelf is seated properly, check that the holes through the back wall of the shelf are lined up with the corresponding holes in the wall rail.
- If desired, insert #6 screws into these holes in the back wall of the shelf and into the holes in the wall rail for extra support.
To remove a tool organizer shelf:
- If applicable, remove #6 screws from the shelf.
- Slide the shelf up and away from the wall rail.
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622
Phone 1-800-525-2579 •
www.ryobitools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>