HAGOR 8716 HA Gasliftarm Medium Dual Installation Guide
- June 13, 2024
- HAGOR
Table of Contents
HAGOR 8716 HA Gasliftarm Medium Dual
Product Information:
- Product Name: HA Gasliftarm Medium Dual
- Model Number : 8716
- Language: German (DE) and English (GB)
Caution: This product is a technical device of considerable value. It is important to handle the components carefully during installation and protect them if necessary. Ensure that the installation area is secured to prevent injuries and material damage. The materials included in the package may not be suitable for all installation conditions, so please check in advance and replace with suitable materials if needed. If you have any doubts or questions regarding the installation, please contact us or other trained specialists.
Product Usage Instructions:
- Installation on open edge of work surface: Begin by mounting the gas lift arm on the open edge of the work surface according to the provided instructions.
- Assembly of the gas lift arm segments: Follow the provided instructions to assemble the gas lift arm segments. Ensure that all segments are securely attached.
- Installation of the VESA mounting plate: Mount the VESA mounting plate as per the instructions provided.
- Cable management: Arrange and manage the cables properly to ensure a tidy and organized setup.
- Adjustment: Make the necessary adjustments for optimal usage:
- Pitching angle: Adjust the pitching angle as desired.
- Horizontal angle: Adjust the horizontal angle as required.
Please follow the above instructions carefully to ensure a successful installation and usage of the HA Gasliftarm Medium Dual.
Caution
- Technical devices are of considerable value. You should therefore handle the components carefully during installation and protect them if necessary.
- If necessary, the installation area should also be secured. Falling parts can cause injuries and material damage.
- The materials included in the scope of delivery may not be suitable for the special conditions at the installation site. Please check this in advance and replace itwith suitable materials if necessary.
- If you are unsure about the installation of the product or have any questions, please contact us or other trained specialists.
Scope of delivery
INSTALLATION
Installation on open edge of work surface
Assembly of the gas lift arm segments
Insert the lower arms into the Base Stern, tighten the screw (A) by Hex Key. Attach the upper arms
Installation of the VESA mounting plate
Cable management
Adjustment
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen |
Telefon: +49(0)57 31-7 55 07-0 | Mail:
[email protected]