TSCO GM-788 Gaming Mouse User Manual

June 13, 2024
TSCO

TSCO GM-788 Gaming Mouse

TSCO-GM-788-Gaming-Mouse-product

Product Information

The GM-788 is a gaming mouse that offers advanced options and granular control to maximize your gaming experience. It features a 16000 DPI optical sensor for precise tracking and customizable buttons and lighting.

Product Usage Instructions

Follow the steps below to use your GM-788 gaming mouse:

  1. Step 1: Make sure your GM-788 is connected to the USB ports of your computer.
  2. Step 2: Download the GM-788 software from the following link: https://tsco.ir/Device-Driver/788.rar and install it. Please note that an internet connection is required for installation and updates.
  3. Once the software is installed, you can access advanced options and customize the following settings:
    • DPI: Change your mouse’s sensitivity by adjusting the DPI (dots per inch) settings.
    • Buttons Function: Rebind buttons on the mouse to perform different functions according to your preference.
    • RGB Mode: Personalize the device lighting with different RGB modes.
    • Polling Rate: Adjust the polling rate of the mouse to optimize its performance.
  4. To learn more about your new gaming mouse and to install the GM-788 software, you can visit the following link: https://tsco.ir/Device-Driver/788.rar

If you need further assistance with your TSCO game device, such as software downloads or product registration, you can visit the TSCO game support website: https://service.tsco.ir/

PACKAGE CONTENT

  • GM-788
  • User Manual
  • Guarantee Card

WHAT’S INSIDE

TSCO-GM-788-Gaming-Mouse-fig-4

  • A Mouse button 1
  • B Mouse button 2
  • C Mouse button 3
  • D Mouse button 4
  • E Mouse button 5
  • F Mouse button 6
  • G Mouse button 7
  • H 16,000 DPI Optical Sensor (PixArt PAW 3335)
  • 1 Ultraslick Mouse feet

Max DPI: 16000
Max Polling Rate: 1000Hz
The DPI and Polling Rate and Button’s Function can be customized using GM-788 Software.

WHAT’S NEEDED

PRODUCT REQUIREMENTS:

  • PC with a free USB port

GM-788 SOFTWARE REQUIREMENTS:

  • Windows® 7 64-bit (or higher)
  • Internet connection for software installation

LET’S GET YOU COVERED

  • You’ve got a great device in your hands complete with a 18 month limited warranty coverage.
  • To activate your warranty service; please send serial number which is written on guarantee card or product to 20004243.

GETTING STARTED

  • Step1: Make sure your GM-788 is connected to the USB ports of your computer.
  • Step2: Download GM-788 software from the link below and install it; https://tsco.ir/Device-Driver/788.rar.TSCO-GM-788-Gaming-Mouse-fig-5

PERSONALIZE YOUR MOUSE

Change your mouse’s DPI, Buttons function, RGB mode and Polling Rate to match your playstyle with using the GM-788 Software. Note: To install the GM-788 Software and find out about your new gaming mouse, visit; https://tsco.ir /Device-Driver/788.rar. TSCO-GM-788-Gaming-Mouse-
fig-7

SAFETY AND MAINTENANCE

SAFETY GUIDELINES
In order to achieve maximum safety while using your GM-788, we suggest that you adopt the following guidelines:

  1. Avoid looking directly at the tracking beam of your mouse are pointing the beam in anyone else’s eye. Note that the tracking beam is NOT visible to the naked human eve and is set on Always -On mode.
  2. Should you have trouble operating the device properly and troubleshooting does not work unplug the device and contact the (021) 42435000 hotline or go to service.tsco.ir for assistance.
  3. Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
  4. Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0 °C (32 °F) to 40 °C (104 F). Should the temperature exceed this range, unplug and switch off the device in order to let the temperature stabilize to an optimal level.

COMFORT
Research has shown that long periods of repetitive motion, improper positioning of your computer peripherals, incorrect body position and poor habits may be associated with physical discomfort and injury to nerves, tendons and muscles.
Below are some guidelines to avoid injury and ensure optimum comfort while using your GM-788;

  1. Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side not too far away and your mouse within easy reach.
  2. Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow height.
  3. Keep your feet well supported, posture straight and your shoulders relaxed.
  4. During gameplay, relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods.
  5. Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to supportyour wrist while gaming.
  6. Customize the button on your mouse to suit your style gaming in order to minimizerepetitive or awkward motions while gaming.
  7. make sure that your mouse fits comfortably in your hands.
  8. Do not sit in the same position all day. Get up step away from your desk and do exercises to stretch your arms, shoulders, neck and legs
  9.  If you should experience and physical discomfort by using your mouse such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck or back, please consult a qualified medical doctor immediately.

MAINTENANCE AND USE

The GM-788 requires minimal maintenance to keep it in optimum condition. Once a month we recommend you clean it using the soft cloth or cotton swab to prevent dirt buildup. Do not use soap or other cleaning agents. To get ultimate experience in movement and control, we highly recommend the premium mousing surface from TSCO. Some surfaces will cause undue wear on the feet requiring constant care and eventual replacement.Do note that the sensor of GM-788 is “tuned” or optimized especially for the TSCO mousing surfaces. This means that the sensor had been tested extensively to comfort that the GM-788 Reads and tracks best on the TSCO mousing surfaces.

  • MAXIMIZE YOUR DEVICE WITH GM-788 SOFTWARE

Access advanced options and granular control as you rebind buttons, assign macros, personalize device lighting and more with the unified hardware configuration tool.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

TSCO User Manuals

Related Manuals