EMME 18508-4 50 Kg Powder Fire Extinguisher Instruction Manual
- June 13, 2024
- EMME
Table of Contents
EMME 18508-4 50 Kg Powder Fire Extinguisher
Product Information
- Product: Wheeled Fire Extinguisher, 50 Kg ABC Powder
- Model: 18508-4
- Fire Rating: A IV B C
- Extinguishing Agent: ABC Powder
- Propellant: N/A
- Temperature Range: N/A
- Nominal Charge: 50 Kg
- Full Weight: ~ 79 Kg
- Dimensions: Height 1100 +/-10 mm ; Width 490 +/-10 mm ; Depth 560 +/-10 mm
- Discharge Time: ~ 39 seconds
- Approved/Certified: D.M. 06 Marzo 1992
- Certified Version: MED 2014/90/EU cod.16508
- Manufacturer: Emme Italia
- Manufacturer’s Address: Via del Molino, 40 – 52010 Corsalone (AR) – Italy
- Manufacturer’s Contact: info@emme-italia.com; Tel. +39.0575.511320
Product Usage Instructions
- Unwind the hose
- Remove safety pin
- Open the valve
- Follow the instructions present on the marking label
- Hold the hose, move the lever, and aim the jet at the base of fire
- Attention: Do not direct the jet at open electrical fires or at on fire involving flammable liquids or gases
- The fire extinguisher can be used at a distance of 1 meter from the fire
- Ventilate the room after extinguishing the fire
Installation and Maintenance For installation and commissioning, refer to the user manual provided. Regular maintenance is required to ensure efficiency guarantees. Please consult the user manual for maintenance periods and instructions.
FEATURES
-
CYLINDER
In high-strength alloy steel, external powder painting Red Ral 3000. -
EXTINGUISHING AGENT
ABC Powder – MAP 40 %. -
PROPELLANT
Dehumidified air or nitrogen (N2) . -
VALVE
2”-F , brass body, lever with red painting Ral 3000. -
USE
A B C fire rating (solid materials, flammable liquids, flammable gas). -
BRACKET
Chassis on wheels, welded at the cylinder, red painting Ral 3000.
Note : image is for illustrative purpose only, the product purchased can has some difference
50 Kg powder wheeled fire extinguisher, temperature range from -30°C to +60°C,
manufactured in accordance to UNI EN 1866-1 (D.M. 6.3.92), certified according
to the directive for pressure equipment PED 2014/68/EU.
Quality Product certification guaranteed by Bureau Veritas Italia.
Suitable for use on fire involving electrical voltages up to 1.000 V, at a
distance of 1 mt.
APPROVED/CERTIFIED FIRE EXTINGUISHER:
For certified MED 2014/90/EU version: cod. 16508
FIRE RATING :
TECHNICAL SPECIFICATIONS
| FIRE RATING | A IV B C |
|---|---|
| EXTINGUISHING AGENT | ABC Powder – MAP 40 % EPB 0351 (QFIRE 40 – Quimica 21, |
S.L.)
PROPELLANT| Dehumidified air or Nitrogen (N2), 15 bar at 20°C
TEMPERATURE RANGE| -30°C / +60°C
NOMINAL CHARGE| 50 Kg
FULL WEIGHT| ~ 79 Kg
DIMENSIONS| Height 1100 +/-10 mm ; Width 490 +/-10 mm
Depth 560 +/-10 mm
DISCHARGE TIME| ~ 39 seconds
MODALITY OF USE
- UNWIND THE HOSE
- REMOVE SAFETY PIN
- OPEN THE VALVE
- HOLD THE HOSE, MOVE THE LEVER AND AIM THE JET AT BASE OF FIRE
Follow the instructions present on the marking label
ATTENTION : Do not direct the jet at people. If you’re dispensing in
close spaces, then ventilate the room. The fire extinguisher can be used on
fire involving electrical voltages up to 1.000 V, at a distance of 1 meter.
INSTALLATION AND COMMISSIONING
- The installation of the fire extinguisher must be performed according to the rules in force.
- The fire extinguisher have to be installed in areas with large spaces and free from obstacles.
- The fire extinguisher must be free of obstructions and marked by an appropriate identifying label.
- It is recommended to install it in a dry place, protected from the atmospheric agents.
- It is recommended the installation of water-based fire extinguishers for close spaces.
- The commissioning of the fire extinguisher for the protection of the area must be carried out by qualified personnel according to the rule in force within 6 months from the date of production and/or placing on the market, reported in the declaration of conformity released by the producer.
MAINTENANCE PERIODS FOR EFFICIENCY GUARANTEES
- The maintaning of the product efficiency have to be carried out from the responsible person.
- It is recommended a visual check of the efficiency state every three months since the commissioning time apart if there are different dispositions.
- It is advisable to : verify that the fire extinguisher would be in a correct position, safe and stable, free from impediment for the use; identify the fire extinguisher with an appropriate identification sign; make sure of its structural integrity and that is free from any damage; check that the original documentations is available.
- Any restoration operations and instrumental checking have to be realized exclusively by qualified personnel who possess the necessary documentation to mantain the constancy of the product performance.
- Any tampering or intromission by unauthorized personnel voids the product warranty
File name| Type of document| Fire Extinguisher Model| Date| Rele.| Check|
Rev.| Pag.
---|---|---|---|---|---|---|---
18508-4_user manual| Use and Maintenance user manual| 18508-4| 07/09/2023|
M.R| | 1| 1/2
Other branches Emme Antincendio s.r.l. in Italy : Milano – Padova – Roma –
P.IVA/ C.F. 11208251006 – R.E.A. AR-159122
Via del Molino, 40 – 52010 Corsalone (AR) – Italy – info@emme-
italia.com – Tel. +39.0575.511320
www.emme-italia.com