NEC SB-01HC HD/SD-SDI Internal OPS Card Operating Instructions

NEC SB-01HC HD/SD-SDI Internal OPS Card

Declaration of Conformity

With the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in Electrical and Electronic Equipment (adopted by Order №1057 of the Cabinet of Ministers of Ukraine) The Product is in conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment (TR on RoHS).

The content of hazardous substances with the exemption of the applications listed in Annex №2 of TR on RoHS:

1. Lead (Pb) – not over 0,1wt % or 1000wt ppm;
2. Cadmium (Cd) – not over 0,01wt % or 100wt ppm;
3. Mercury (Hg) – not over 0,1wt % or 1000wt ppm;
4. Hexavalent chromium (Cr6+) – not over 0,1wt % or 1000wt ppm;
5. Polybrominated biphenyls (PBBs) – not over 0,1wt % or 1000wt ppm;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0,1wt % or 1000wt ppm.

Safety Cautions

Precautions

Please read this manual carefully before using your SB-01HC HD/SD-SDI Signal Input Board and keep the manual handy for future reference.

This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.

This symbol alerts the user that important information concerning the operation and maintenance of this unit has been provided. The information should be read carefully to avoid problems.

Important Safeguards

These safety instructions are to ensure the long life of your Signal Input Board and to prevent fire and shock. Please read them carefully and heed all warnings.

Fire and Shock Precautions

• If you should notice smoke or a strange smell, turn off the power of the device on which the board is mounted and unplug the power cord from the power outlet. After doing this, contact a service center for repairs.
• When inserting the board into a device, do not insert any foreign objects into the device.
• Do not use or replace the board in places where it may be exposed to water. If the board should get wet, contact a service center for repair, without mounting the board onto a device.
• Do not disassemble or alter the board. Contact a service center for internal inspections, adjustments, or repairs.
• When replacing the board, turn off the main power switch of the device on which the board is mounted before beginning.
• If you should hear thunder, do not mount or remove the board with the device’s power cord plugged into a power outlet.

Disposing of your used product

EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. When you dispose of such products, please follow the guidance of your local authority and/or ask the shop where you purchased the product. After collecting the used products, they are reused and recycled in a proper way. This effort will help us reduce the waste as well as the negative impact such as mercury contained in parts to human health and the environment at the minimum level. The mark on the electrical and electronic products only applies to the current European Union Member States.

Declaration of the Manufacturer

We hereby certify that the device SB-01HC is in compliance with Council Directive 2006/95/EC:

• EN 60950-1

Council Directive 2004/108/EC:

• EN 55022 Class B
• EN 61000-3-2
• EN 61000-3-3
• EN 55024

and marked with

NEC Display Solutions, Ltd. 4-28, Mita 1-chome, Minato-ku, Tokyo, Japan

DOC Compliance Notice (for Canada only)

This Class B digital apparatus complies with Canadian ICES-003.

RF Interference (for USA only)

WARNING

The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

WARNING TO CALIFORNIA RESIDENTS: Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.

DECLARATION OF CONFORMITY

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

• U.S.Responsible Party: NEC Display Solutions of America, Inc.
• Address: 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143
• Tel. No.: 1-800-NEC-INFO
• Type of Product: HD/SD-SDI Option Unit
• Equipment Classification: Class B Peripheral
• Model No.: SB-01HC

We hereby declare that the equipment specified above conforms to the technical standards as specified in the FCC Rules.

Features

This board enables input of SDI signals when inserted into the slot of an NEC monitor or projector. It is also equipped with a loop-through output terminal for monitoring.

Checking the Included Parts

• HD/SD-SDI board (this board)
• Operating Instructions (these instructions)

PLEASE

• When discarding this board, contact your store of purchase or local government.

Names of Parts

Board front panel

Board rear panel

NOTE

• Do not touch the connector on the rear panel. If touched, static electricity could cause malfunction.

Mounting Onto Devices

For instructions on mounting the board onto a monitor or projector, see the respective device’s operating instructions. With some monitors, the SB-02 AM optional adapter may be required. For connection, use 75 coaxial cables with a thickness and performance of 5C-FB or greater. Use BNC connectors.

NOTE

• Signals could be adversely affected by the cables used for connection.
• When the board is mounted on the projector, the picture may be disturbed during access point search processing with the projector’s wireless LAN.
• When installing this board, ensure that the top side of this board is facing the rear of the display. This board and the display may be damaged if inserted with the wrong orientation.

Specifications

HDTV: SMPTE 299M (32 kHz/44.1 kHz/48 kHz)

For the audio signals, 2-channel stereo audio is supported. Audio channel 1: Left channel

Audio channel 2: Right channel

Output signal| Video/Audio| loop-through output
Usage environment| Operation temperature: 0 to 40ºC| Operation humidity: 20 to 80% (no condensation)
Storage temperature: -10 to 50ºC| Storage humidity: 20 to 80% (no condensation)
External dimensions| 200 (width) x 30 (height) x 145 (depth) mm
Weight| 0.34kg

Signal Correspondence Table

1/1.001 frame rate supported.

FAQs

What is the purpose of the NEC SB-01HC HD/SD-SDI Internal OPS Card?

The NEC SB-01HC HD/SD-SDI Internal OPS Card enables input of SDI signals when inserted into the slot of an NEC monitor or projector. It also has a loop- through output terminal for monitoring.

What are the safety precautions for using the SB-01HC HD/SD-SDI Internal OPS Card?

If you notice smoke or a strange smell, turn off the power and unplug the power cord. Contact a service center for repairs. Do not insert any foreign objects into the device when inserting the board. Do not use or replace the board in places where it may be exposed to water. If it gets wet, contact a service center for repair. Do not disassemble or alter the board. Contact a service center for internal inspections, adjustments, or repairs. Turn off the main power switch before replacing the board. Do not mount or remove the board with the device's power cord plugged into a power outlet during thunderstorms.

How should I dispose of my used SB-01HC HD/SD-SDI Internal OPS Card?

EU-wide legislation requires that used electrical and electronic products be disposed of separately from normal household waste. Please follow the guidance of your local authority or ask the shop where you purchased the product for proper disposal instructions.

What should I do if the picture is disturbed during access point search processing with the projector's wireless LAN?

When installing the SB-01HC HD/SD-SDI Internal OPS Card, ensure that the top side of the board is facing the rear of the display. Inserting it with the wrong orientation may cause damage to the board and the display.

What cables should I use for connection with the SB-01HC HD/SD-SDI Internal OPS Card?

Use 75 coaxial cables with a thickness and performance of 5C-FB or greater. Use BNC connectors for the connection.

What should I do if I experience RF interference with the SB-01HC HD/SD-SDI Internal OPS Card?

If the equipment causes harmful interference to radio or television reception, try one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a different circuit than the receiver. Consult the dealer or an experienced radio/TV technician for help.

What is the difference between HD SDI and 3G SDI?

HD-SDI signal formats range from 19.4 Mbps to 1.485 Gbps. 3G SDI signal formats vary from 19.4 Mbps to 2.97 Gbps. HD SDI is the common name for the 1.485Gbps serial interface. SMPTE adopts SMPTE424M, a new standard that increases the SDI data rate two times to 2.97 Gbps, which is 3 Gbps (3G) SDI.

What is the resolution of the HD-SDI signal?

HD-SDI can transmit signals up to 1080P30fps. 3, 3G-SDI can transmit up to 1080P60fps signal. 4, 12G-SDI can transmit signals of up to 4K60fps. The detailed transmission rate does not need to be tangled, just remember the transmission type resolution.

What is the frequency of HD-SDI?

The range of operation for an HD-SDI receiver is specified in SMPTE 292M to at least -20 dB at one-half the data clock rate, or about 743 MHz. Therefore, a standard level 0.800 volt peak-to-peak digital transmission may be attenuated to as low as 0.080 volt, or 80 millivolts, while performing reliably.

Download this PDF Link: NEC SB-01HC HDSD-SDI Internal OPS Card Operating Instructions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>