Stilo WL-KEY Wireless Helmet Key Instructions
- June 13, 2024
- Stilo
Table of Contents
Stilo WL-KEY Wireless Helmet Key
PRODUCT INFORMATION
MODEL NAME : Stilo WL-KEY Wireless Helmet Key
Quick Instructions
BASIC COMMAND
Commands:
- Turn on. PTT function (road mode)
- Volume down button
- Volume up button
Turn ON
- Press the central button for about 2 seconds (until the two LEDS turn on) to turn ON the device
Volume Regulation:
- Shortly press the key “+” or the key “-” to increase or decrease the volume of one step. At each short pressure, the volume will move of one step.
Turn OFF
- Press the central button and the “-” button for about 2 seconds to turn OFF the device.
- If the device stays On without connection with the intercom it will turn Off automatically after 10 minutes.
Pairing:
Carry out the operation on one helmet at a time
- Turn the device off.
- Press the central button for 8 seconds , two LEDS (blue and red) will start flashing.
- Wait for the pairing with the other device
- ON THE DG: press for 8 sec. the related button «helmet»
Main unit connection:
If disconnected, press any key to reconnect to the control unit once back
within its range of action (10 meters)
Volume Regulation:
After pairing,shortly press the key “+” or the key “-” to increase or decrease
the volume of one step. At each short pressure, the volume will move of one
step. The volume will automatically sincronize with the DG
EVOLVED FUNCTIONS
Function MUTE:
- Press and hold the “-” button for 2 seconds to disable the helmet’s microphone and audio. By pressing any key, the function is deactivated and communication is restored.
It is also possible to reactivate the communication by pressing one of the Vol keys on the control unit. Mute function doesn’t work during a phone call
Side tone regulation:
- Keep the “+” key pressed for 6 sec to activate the function.
- You can adjust the volume of your return voice using the “+” and “-” volume keys
The setting is automatically saved after 6 seconds of inactivity.
ROAD MODE ONLY
PTT (radio connection only)
- Press and hold the center button to activate Push To Talk. A tone confirms pressing the key, the radio transmission will be active after 1 second and will remain active until released. The red confirmation LED will light up on the control unit.
Incoming call :
- Press the key “+” or the key “-” to accept incoming calls
Reject or end a call:
- Press and hold the key “+” or the key “-” for 2 sec. to reject incoming calls.
- During a call press and hold the key “+” or the key “-” for 2 sec. to end the call
Callback last number:
- Press the key “+” and the key “-” for 2 sec to call back the last number.
Battery specs:
- Charge duration in continuous use: 4 h
- Charging time (from low battery): 1,30 h
Always recharge before use to ensure optimal battery life
WARNING!!! Please, be aware that some substances (like brake fluids based on polyglycols) may be aggressive on paints and plastics and may damage them.