SWITCH LIGHTING PM225 Cirro Ceiling Washer Instruction Manual
- June 13, 2024
- SWITCH LIGHTING
Table of Contents
SWITCH LIGHTING PM225 Cirro Ceiling Washer Instruction Manual
Approved insulation
Pink Batts, Bradford Gold, InsulPro Polyester insulation, Ecofleece, Autex
Greenstuf, Earthwool, Premier insulation.
Contact Switch Lighting for other insulation information.
Caution:
Macerated paper (Insul-fluf) and other loose fill insulation as defined in NZS
4246 is not permitted to abut or cover this luminaire and driver or be used
anywhere near this luminaire. Always turn power off when connecting or
disconnecting luminaires.
Required clearance: Standard
Required clearance from structural members and building elements:
SCB = 0mm HCB = 0mm
Dimmer compatibility:
Dependent on product type. Casambi, DALI or the following phase-cut dimmers:
PDL or Clipsal universal and trailing edge, HPM trailing edge, Legrand
EM400A3P.
Contact Switch Lighting for other dimmers.
Warranty
Luminaire: 7 years Driver: 5 years Proof of purchase is required.
See website for full warranty conditions.
Recommended setout dimensions
| Dimension | Measurement | Description |
|---|---|---|
| A | 1.5-1.8m | Distance from wall |
| B | 1.5-2m | Pitching/spacing |
| C | 0.6m | Minimum distance down from ceiling |
| D | 1.8m | Minimum distance above floor |
Installation
-
Cut rectangle in wall using template on box
*Recommended distance from ceiling -
AC connection (by registered electrician)
-
Ensure mounting tabs are vertical
-
Mount light (do not over-tighten screws) Ensure light is level
-
Clip in cover
Insert front edge of cover into house then snap back corners in
NB: The cut-out template is supplied on the product box lid
Documents / Resources
|
SWITCH LIGHTING PM225 Cirro Ceiling
Washer
[pdf] Instruction Manual
PM225 Cirro Ceiling Washer, PM225, Cirro Ceiling Washer, Ceiling Washer,
Washer
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>