AVYCON AVA-MICSPKSRN Audible and Visual Alarm Device Instruction Manual

June 13, 2024
AVYCON

AVYCON logo

AVA-MICSPKSRN Audible and Visual Alarm Device
Instruction Manual

AVA-MICSPKSRN Audible and Visual Alarm Device

AVYCON AVA MICSPKSRN Audible and Visual Alarm Device -
Interface2

AVA MICSPKSRN
ALARM DEVICE MANUAL

Audible and Visual Alarm Device

This alarm device is designed to provide both an audible and visual alarm which can be alert, warn, or draw attention to any IP camera alarm.AVYCON
AVA MICSPKSRN Audible and Visual Alarm Device

Interface

AVYCON AVA MICSPKSRN Audible and Visual Alarm Device -
Interface| AVYCON AVA
MICSPKSRN Audible and Visual Alarm Device - Interface1
---|---

  1. Microphone
  2. Speaker
  3. Alarm Light
  4. Increase the volume of the alarm sound (4th gear volume adjustment).
  5. Reduce the volume of the alarm sound (4th gear volume adjustment).
  6. Long press for 3 seconds to switch the type of alarm sound. (Three types: 1. Normal interval alarm sound; 2. Dog barking; 3. Police car alarm)
  7. Mounting Bracket

Instruction of Cables

AVYCON AVA MICSPKSRN Audible and Visual Alarm Device -
Cables

  1. ALARM OUT: Connect to the ALARM OUT interface of IPS
  2. ALARM COM : Connect to the ALARM COM interface of IPC
  3. AUDIO OUT: Audio output (Speaker)
  4. AUDIO INPUT: Audio input port (with Microphone)
  5. DC 12V: Power input port

Picture of the Alarm and IPC

AVYCON AVA MICSPKSRN Audible and Visual Alarm Device -
Alarm.

  1. Connect the ALARM cable (ALARM COM and ALARM OUT) and turn on an ALARM type in the ALARM type of IPC interface. When this type of ALARM is triggered, the ALARM sound of the external ALARM will sound and the  ALARM light (red and blue light) will flash on.

  2. After the audio output is connected, the voice received by IPC (for example, if the PC is connected to the microphone and the intercom is opened on the Web of IPC) will be output from the speaker of the external alarm; If IPC  supports audio playback, the speaker can also accurately broadcast the corresponding sound.

  3. If the audio input is connected, the sound received by the MIC of the external alarm will be output from IPC (for example, if the HEADSET is connected to the PC, the audio is enabled on the Web end of IPC).
    Note: audio input and output at the same time can be two-way intercom.

  4. IPC powers alarm

  5. IPC charged through POE

AVYCON AVA MICSPKSRN Audible and Visual Alarm Device -
Alarm

Alarm Spec

Product Specification

Audio Input 1 Channel
Audio Output 1 Channel
Alarm Out 1 Channel
Alarm COM 1 Channel
Siren Mode Support 3 Different Sounds
Micro Phone Support 10 Meters
Siren 88 dB
Enforcer Light 30 Lumen
Waterproof IP66
Power DC12V, 2.5W

AVYCON logo

ANYCON
Copyright © AVYCON.
All rights reserved. Specifications and pricing are
subject to change without notice.
phone: 949-752-7606
email: info@avycon.com
social: @avycon_aivo
website: avycon.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals