SPRINTIS DWL-428 A4 Laminator User Manual
- June 13, 2024
- SPRINTIS
Table of Contents
SPRINTIS DWL-428 A4 Laminator
Product Information
The DWL-428 A4 Laminator is a machine specially designed for laminating pouches of between 80 Mic and 125 Mic. It can be used to laminate pictures, cards, documents, paper, and more. This laminator offers safety features to prevent damage to the device and injuries to the operator. It comes with a power indicator, ready indicator, power switch, and a pouch entry and exit point. The laminator operates at an operating voltage of 230V / 50Hz and requires a warm-up time of 4-8 minutes before use.
Product Usage Instructions
Safety Advice
- Read and follow the safety notes in the manual to prevent damage to the device and injuries.
- Clean the rollers by folding an A4 sheet of paper and insertingit into the entrance until no more glue clings to the paper.
- Always disconnect the appliance from the mains before cleaning.
- Allow the laminator to cool down before cleaning.
Usage Instructions
- Ensure the machine is placed horizontally and there is enough space to insert the pouches.
- Insert the power plug into an electrical socket.
- Press the power switch to turn on the machine. The power indicator will light up, and the motor starts.
- Wait for 4-8 minutes for the machine to warm up. Once the operating temperature is reached, the ready indicator will light up.
- Place the item to be laminated into a laminating film, ensuring a margin of 3-5 mm to the edge of the pouch.
- Insert the laminating film with the closed side first into the entrance of the laminator.
- The laminating process will start automatically.
Note: Always insert the laminating pouch with the closed side first to avoid damage to the unit and the pouch.
Please read before use
Thank you for purchasing the laminator DWL- 428. This machine is specially designed for laminating pouches of between 80 Mic and 125 Mic. It can be used to laminate pictures,cards, documents, paper, etc. Please read this instruction carefully before use. Please keep this manual on file as reference book and for troubleshooting.
Safety advice
To prevent damage of the device and injuries of the operator, it is absolutely necessary to comply with the safety notes in this manual. The mentioned warnings describe possible injuries and damages, which are due to wrong usage or maintenance of the device. Please read and follow these safety notes before reading the manual.
Cleaning the rollers:
- Switch on the unit as described.
- Fold an A4 sheet of paper and insert it into the entrance with the folded side first. Repeat this process until no more glue clings to the paper.
Cleaning the machine:
- Always make sure to disconnect the appliance from the mains before cleaning. Allow the laminator to cool down before cleaning.
- When the machine has cooled down, use a soft cloth to clean the machine.
Please note
- Always switch off the machine after use. Never use the laminator for more than one hour. Wait 15 seconds between each lamination. Allow the machine to cool down for at least 30 minutes after switching off before putting it away.
- Protect the machine from moisture. Make sure that the laminator is dry before use. Do not place the appliance near an air conditioner.
- Never insert any objects or materials other than the appropriate laminating pouches. Documents that are too thin (e.g. fax paper that is thinner than 30mic) or materials that are too soft cannot be fed into the machine because they will twist and jam the rollers.
- Never cover the machine with tissues, magazines etc. during operation.
- Laminate in rooms with a normal temperature (from 10-35°C).
Description
- Pouch entry
- Power indicator
- Ready indicator
- Power switch
- Pouch exit
Operation
Important: Always place the machine horizontally and ensure there is enough space to insert the pouches into the machine. Make sure that the operating voltage is 230V / 50Hz.
- Insert the power plug into an electrical socket.
- Press the switch (4). A red indicator (2) will light up and the motor starts.
- Wait 4-8 minutes for the machine to warm up. Once the operating temperature is reached, a green lamp (3) lights up.
- Place the item to be laminated into a laminating film, and make sure that thedocument has a margin of of 3-5 mm to the edge of the pouch.
- Now insert them together into entrance (1) of the laminator closed side first. The laminating process starts automatically.
Note
- In order to avoid damage to the unit and the pouch, make sure that you always insert the laminating pouch with the closed side first. This prevents a jam from occurring.
- Certain types of paper my not be sealed evenly or appear cloudy after lamination. In this case, re-insert the pouch into the laminator fo a better effect.
- When you are not laminating, switch off the machine.
- The laminating pouch is very hot and unstable when it slides out of the exit. Please watch your hands and avoid pulling out the lamination prematurely, otherwisedeformation may occur.
- To use the cold lamination function after hot lamination, please wait at least 30 minutes until the machine has cooled down.
Use laminating pouches
Important
- Laminating film pouches cannot be reused.
- Maximum film pouch thickness 80-125 Mic / Maximum laminating width: 220 mm
Item Details And Technical Data
Technical Data
Item details
- Range of application: home
- Dimensions: 335 x 100 x 86 mm
- Weight: 1,2 kg
- Heating systems: 2 indirect heated rollers
- Drive type: 2 pull rollers
- Temperature settings: no
- Cold lamination possible: no
- Photolamination possible: yes
- Jam release mechanism: yes
- Overheating protection: yes
- Reverse function: no
- optical readiness indicator: yes
- Housing material: plastic
- Colour: black
Technical data
- Entry width: 245 mm
- For formats up to: A4 (216 x 303 mm)
- Max. thickness: 2 x 125 mic
- Laminating speed: 250 mm/min
- Function: Hot laminating
- Voltage: 230V / 50 Hz
- Power consumption in watts: 200
- Heating time: 5 minutes